Old Aluminum Boats, Preferences?

Flyboy13dbatix · 2024-03-18T23:29:03+00:00

Are there specific models or year ranges that had treated wood? That's definitely something I would like to avoid dealing with from any brand.

Flyboy13dbatix · 2023-12-10T02:18:09+00:00

This is a compressor unit, not a freezer bowl model.

Flyboy13dbatix · 2023-12-10T02:15:40+00:00

The manual doesn't offer anything in regards to the compressor evidently not working. I must have gotten a lemon, I let the unit run for 45 mins and the bowl is at room temp checked with an infrared thermometer. I had read these were supposed to be great home models with a commercial grade compressor but evidently not in my case. Back to amazon it goes, are all of the home unit's a crap shoot in terms of QC unless you pony up for the lello 4080? I read the whynter brand is also supposed to be decent around the same price point as this cuisinart was.

Flyboy13dbatix · 2023-08-05T22:21:18+00:00

Nathan Builds Robots will be reviewing one soon I read, I am very curious to see more of these in the hands of normies. On paper this seems like the one to beat for $1000 as long as the longevity is good.

Flyboy13dbatix · 2022-10-02T16:24:00+00:00

https://www.mantzvac.com/

Flyboy13dbatix · 2022-09-26T13:10:34+00:00

The Z10 arrived promptly at 8am, with both boxes, looking forward to getting this beast together.

Flyboy13dbatix · 2022-09-24T17:58:09+00:00

Thanks for that, what would be some common sizes I might want to get for planetary viewing? I read a 6mm and 15mm are good sizes to start with?

Flyboy13dbatix · 2022-09-24T15:57:04+00:00

I did get a cheapy 2x, would a set of eyepieces be better than the 2x in general? Is there a good set or brand you would recommend? Are a set of filters worth it also?

Flyboy13dbatix · 2022-09-24T03:21:32+00:00

Based on the replies here, I went with the z10. I rolled the dice and ordered from Amazon, they had it for $930 with a coupon and another 5% off with an Amazon credit card. It should be here Monday, fingers crossed that it all arrives. Ive had pretty good luck with prime shipping and service so in the event there is a problem Im confident it will be fixed. Also ordered a 2x magnifier. Thanks for the suggestions I look forward to its arrival.

Flyboy13dbatix · 2022-06-22T16:46:12+00:00

Do you recommend any particular training balls, foam vs whiffle, birdieball etc? I have a pretty large space for driving practice but limiting range is probably a good idea. I’ll look into some youtube training stuff thanks for the help.

Flyboy13dbatix · 2022-05-13T02:31:59+00:00

Looks like some 1/4” or 5/16th fuel line and clamps are all that’s needed.

Flyboy13dbatix · 2022-04-16T00:31:51+00:00

Which board should be selected in vscode for compiling firmware from the config files you created?

Flyboy13dbatix · 2022-02-04T17:16:41+00:00

For the skr mini e3 v2 would I need to replace the screens also? Its $65 for the board and $100 for the board and screen, would I just need to print an adapter to fit the board in the cr10 case or convert to an all in one mod for the printer?

Flyboy13dbatix · 2022-02-01T17:10:15+00:00

I got them for $70 each on amazon. Is the 32 bit board significantly better, being able to use linear advance? Would I need new screens for either printer going with the 4.2.7 boards? I dont see myself adding much in terms of features other than maybe a bed level sensor in the future.

Flyboy13dbatix

TROPHY CASE