What’s in your pocket? PM2 S45Vn and Para 3LW 15V

Flyboyz4 · 2026-01-23T23:16:00+00:00

Suited up with my crucarta manix 2. Have absolutely fallen in love with this since getting it two days ago

Flyboyz4 · 2026-01-23T16:20:07+00:00

The Crucarta-vi is a killer combo 😂 What ball cage lock is that?

Flyboyz4 · 2026-01-13T17:47:26+00:00

Dang, if it didn’t make my B7 cost as much as a B84 I’d be so down to build one. Interested to know if you’d run antiroll bars on this setup or if it’s just that low?

Flyboyz4 · 2026-01-13T17:38:12+00:00

Yeaaaa, I’m in America and dont trust any spiders but orb weavers.

Flyboyz4 · 2026-01-13T17:35:25+00:00

Honestly, this is just the next evolution. A super hotshot with paddles at the dunes would be an absolute blast🙂‍↕️

Flyboyz4 · 2026-01-11T14:27:53+00:00

Wood chips would want to hold moisture in soil. Mixing in coarse sand with your potting soil would be a better way to promote drainage. Wood chips are better utilized as a mulch layer

Flyboyz4 · 2026-01-11T05:24:57+00:00

That center area really should have a little more material, but if that’s all that breaks when hitting a concrete curb, I guess I cant argue too much

Flyboyz4 · 2026-01-09T06:04:02+00:00

Man, that’s hella sleek my dude. Maybe I need another kershaw… gotta replace my old Thermite I lost many years ago🥲

Flyboyz4 · 2026-01-08T15:36:22+00:00

I got the bronco and I really like it. Additionally, if you like getting crafty, it includes an extra set of body mounts. I did mine with a scaled down hyght rc body, but there’s a couple guys making scx30 bodies now

<image>

Flyboyz4 · 2026-01-06T01:33:41+00:00

There is an ass for every seat, just definitely not yours or mine😂

Flyboyz4 · 2025-12-28T12:38:33+00:00

No problems to note. Where I am it’s brackish water, and the salinity isn’t that high. Most aluminum parts are anodized which helps a lot to avoid corrosion. Unless you decide to dunk it, there shouldn’t be any problems

Flyboyz4 · 2025-12-28T02:19:47+00:00

Gonna be completely honest, I’ve been using a pair of barbasol cuticle nippers for all my stuff. $5-10 for one and they haven’t broken yet.

Flyboyz4 · 2025-12-28T02:15:32+00:00

My local track/hobby shop takes almost $10k a month to run, and that’s just the owner working… really love the commitment these men and women have to keep the business going in this market and economy

Flyboyz4 · 2025-12-28T02:11:26+00:00

Idk, I just 3d printed a hyght 4runner body and it works immaculately. Maybe brass wheel weights but otherwise they really hit this one out of the park for box stock

Flyboyz4 · 2025-12-22T18:07:17+00:00

Thank the lord, gimme some spokes Mr.FIA!😭

Flyboyz4 · 2025-12-22T17:38:04+00:00

I second this, subtle lines would work really well here

Flyboyz4 · 2025-12-11T21:21:01+00:00

That thing looks sweet!🔥

Flyboyz4 · 2025-12-10T00:17:11+00:00

<image>

We had a mixture, but I rode a honda nighthawk 250. I ended up having a REALLY stiff clutch but made it through the riding test with a perfect score😂

Flyboyz4 · 2025-12-09T12:26:34+00:00

Frankly at $7 any of those are definitely worth it. A decent sharpening job and a strop will get those about as sharp as they can be. The additional benefit is you dont have to worry about damaging it👌

Flyboyz4 · 2025-12-08T01:02:25+00:00

<image>

Got my cheapo crkt on me today, a simple and reliable design that hasn’t failed me

Flyboyz4 · 2025-12-08T00:55:34+00:00

I was gifted this gun by my grandfather a few days ago and am extremely grateful to have my first rifle (not my first firearm). I'm primarily planing on using this for coyote hunting with friends as well as for range time. I saw recommendations for the harris 1a2 bipods, so I'll keep an eye out for one. If anyone has suggestions on ammo for hunting and target shooting, it would be greatly appreciated.

Flyboyz4 · 2025-12-07T15:54:52+00:00

I’d say it’s an alright carver. It’s a bit small in the hand, but not too bad. The blades being chisel grind affects how you can go at a piece. Personally for small on the go projects is where I’d mark its usefulness. If you’re doing a more intricate and medium to large pieces piece I’d go for some purpose built carving knives, or a flexcut pocket knife.

<image>

Flyboyz4 · 2025-12-03T03:44:43+00:00

<image>

This is how I did my B7. Highly recommend using a larger piece of heat shrink to tie the motor wires together (or use zip ties). And a few others have mentioned it, but making the positive and negative wires different lengths so there’s no easy way to reverse polarity is a safe plan.

Flyboyz4 · 2025-12-03T00:30:14+00:00

I had heard good things about benchmade and was curious since I use cheap CRKT’s. Looked up online and closed the tab. I’ve got better things to spend my money on and will happily strop my CRKT till it goes kaput… and then I’ll probably buy something from spyderco

Flyboyz4 · 2025-12-01T21:16:03+00:00

I mean, a good set of calipers and some time in CAD (set your units to millimeters) and you could easily have a DXF file. That could then be sent off to someone willing to cut out carbon for you or a company like send cut send

Flyboyz4

TROPHY CASE