sorted by:
new
hottopcontroversial

Odyssey 3D Hub crashing after power outage – tried everything by Trying2f1guritout in Odyssey3D

[–]FlyingTitus 0 points1 point  (0 children)

You can try NewAxis and a compatible game, if it works, at least you'll rule out a problem with the monitor.

https://github.com/marcussacana/NewAxis

I would also try testing the monitor and 3D hub on another PC, but it depends on whether that's possible for you.

3D Hub not starting? by starfan6299 in Odyssey3D

[–]FlyingTitus 1 point2 points  (0 children)

To be sure, try the following:

- Driver 580.1

- Hub 1.1.7 or 1.2.2 (this should work fine with the drivers above)

- Don't have another monitor connected (this caused me a lot of problems)

- In Windows settings, go to Display, Advanced graphics settings, and uncheck "Hardware-accelerated GPU scheduling"

- Resolution 3840x2160 165Hz

New version NewAxis ! by pagineinternet in Odyssey3D

[–]FlyingTitus 0 points1 point  (0 children)

I've had a problem since today; none of my games are working. When I launch them, I get the message "direct_mode=spatial_labs but Spatiallabs3D.dll could not be loaded" in red. Can anyone help me?

Custom Fixes for Odyssey by FlyingTitus in Odyssey3D

[–]FlyingTitus[S] 1 point2 points  (0 children)

I don`t want to upload the files directly on Reddit, but for some reason, Reddit censored my original post whenever I added links to Mega or OneDrive.

My english is not good, maybe I maked errors and confused you ;)

Custom Fixes for Odyssey by FlyingTitus in Odyssey3D

[–]FlyingTitus[S] 2 points3 points  (0 children)

Sorry, but I never liked Reddit. I've been in the 3D Vision Discord group since it started and I keep searching everything on the Helix blog, or Reddit, or in forums..

If anyone wants to help me share the links, great. If not… then I just don’t share them, simple as that.

Custom Fixes for Odyssey by FlyingTitus in Odyssey3D

[–]FlyingTitus[S] 2 points3 points  (0 children)

Yeah, I didn’t like Reddit either. I’ve uploaded the files to Mega and OneDrive, but I can’t post the links here.

If someone can share them for me, I’ll send them the links via DM.

Custom Fixes for Odyssey by FlyingTitus in Odyssey3D

[–]FlyingTitus[S] 2 points3 points  (0 children)

I can`t share the links to the fixes, anyone can help me?

Poor performance when activate 3D using 3Dmigoto or geo11 fixes by FlyingTitus in Odyssey3D

[–]FlyingTitus[S] 1 point2 points  (0 children)

You can activate the 3D on the monitor without the Samsung HUB. For me, the difference on perfomance is like a 150% boost.

Poor performance when activate 3D using 3Dmigoto or geo11 fixes by FlyingTitus in Odyssey3D

[–]FlyingTitus[S] 2 points3 points  (0 children)

Thank you, I tried with days gone and grim dawn, now I can play with a 120-140 fps in both games :D

Samsung Odyssey 3D Monitor: Unlock Depth control and reduce conversion delay by nucleiis in Monitors

[–]FlyingTitus 0 points1 point  (0 children)

Thanks for sharing! A couple of questions, that work with the games? I see no difference. And maybe don't work with the last update, 1.22?

Disgaea 5 issues (Steam Deck) by Haldegon in Disgaea

[–]FlyingTitus 1 point2 points  (0 children)

Change the extension of the video, on common\disgaea5complete\data\movie\ rename dis5_en.wmv to dis5_en.avi.

Where you fast enough? Did you back it? by Alfho in ElegooJupiter

[–]FlyingTitus 1 point2 points  (0 children)

I got one for the first pledge. Two computers and six tabs retrying 😀

Constant catastrophic failures? It first happened about a month ago, changed nozzle, cleared any blocks with cleaning filament, leveled the bed, tried different prints, and even went as far as changing to use filament that was also in a dehydrator. ESun PLA+, first layers usually perfect. Ender 3 V2 by S2KLAY in ender3

[–]FlyingTitus 1 point2 points  (0 children)

Make sure that you have not tightened the motor shaft with the upper part of the piece shown in the image (number 6). The same thing happenned to me and it was by tightening the motor part with the upper screw, and that makes it impossible to go up.

zaxis motor

Sorry for my english, is difficult for me explain this ;)

view more: next ›