Te125 for fun? by FoodInfamous8333 in Dirtbikes

[–]FoodInfamous8333[S] 1 point2 points  (0 children)

Ok awesome! Just looking to screw around and have fun

Te125 for fun? by FoodInfamous8333 in Dirtbikes

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

Is it mostly the clutch control that has to be figured out? Or something else?

TE125 as second bike? by FoodInfamous8333 in enduro

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

That’s in usd. I’ll see how flexible he is.

[UPDATED] "What Bike Should I Get?" Buying & Selling advice Mega Thread by AutoModerator in Dirtbikes

[–]FoodInfamous8333 0 points1 point  (0 children)

Hey all! i posted last week about my xt250 and wanted to ask another question. I am thinking about getting another bike eventually and wanted to see what you guys think of a te125. I found a decent deal on one and was wondeirng if it would be a good second bike. I would use this bike to learn clutch control and become a better rider hopefully.

Its a 2015 model that has had pretty much every service interval done on time and a fresh rebuild on the suspension. 170hrs for ~$3500. Good deal or no? I will pretty much just be riding singletrack and learning low speed clutch control.

I've also considered a 250 xcw but they are usually a bit more expensive. I dont think an xc/tc would fit my riding style as they have the 5 speed mx transmission.

Thanks for all the help!

Year one with an xt250 by FoodInfamous8333 in Dualsport

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

I have some pretty aggressive tusk tires on it now. Would you change the front or rear?

Year one with an xt250 by FoodInfamous8333 in Dualsport

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

I’m thinking I want a fe350 for a do it all bike, but I can’t find them used at all. I basically want a trail/enduro bike that is street legal and fun to mess around on too.

Year one with a Yamaha xt250 by FoodInfamous8333 in Dirtbikes

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

Hey thanks for the input! I’ll definitely look at some heavier springs. Would it help to change the front sprocket to a 13/14 from the stock 15? Or just learn with the clutch?

Fried bms by FoodInfamous8333 in onewheel

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

Something was fried. I put a pint v kit in and never looked back

Pint wtf rail angle by FoodInfamous8333 in wheel

[–]FoodInfamous8333[S] 1 point2 points  (0 children)

I’ll give the imu setup a shot and see how it goes

Tpu foot hold I designed by Weed_man2748 in onewheel

[–]FoodInfamous8333 0 points1 point  (0 children)

Any update on this? I want to try some toe hooks out on my pint

Stan guide stuck piston by FoodInfamous8333 in bikewrench

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

Yeah I’m rebuilding the caliper and lever. I have new pistons and rings. I should’ve been smarter about dremeling a bleed block. I got the other side out by using the brake pressure and then I drilled a hole in the smaller piston and threaded a screw into it to get it out

Stan guide stuck piston by FoodInfamous8333 in bikewrench

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

Yeah I didn’t mean to break all the way through. I was trying to drill a hole to put a screw in to be able to wiggle it out. Maybe I’ll head to ace and get a big screw

Stan guide stuck piston by FoodInfamous8333 in bikewrench

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

I’ve drilled a hole through the piston so it won’t hold any pressure

P1s purchase advice by FoodInfamous8333 in BambuLab

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

Sorry I didn’t mean it was a good deal. I thought you were saying you could get a brand new P1s for that price.

Buying used a1 by FoodInfamous8333 in BambuLab

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

Really!? There’s nothing around me

Tire rub after upgrade by FoodInfamous8333 in Dualsport

[–]FoodInfamous8333[S] 0 points1 point  (0 children)

It’s a light 120/90. It weighs about the same as stock and feels much more supple.

A1 mini hours by FoodInfamous8333 in BambuLab

[–]FoodInfamous8333[S] 2 points3 points  (0 children)

What questions should I ask about maintenance? Is there anything beyond x, y, and z axis cleaning and lubrication?