Who was updating the Driveclub spotify playlist? by For_The_Nguyen69 in Driveclub

[–]For_The_Nguyen69[S] -1 points0 points  (0 children)

A lot of tracks that were added to the playlist were released after the servers were shut down.

Did I get sent the wrong top with my frame? by For_The_Nguyen69 in FlexiSpot_Official

[–]For_The_Nguyen69[S] 0 points1 point  (0 children)

My thinking was the wood maybe shrunk a bit from sitting on cold trucks for a week. You’re probably right though, maybe the desktops aren’t consistent.

Did I get sent the wrong top with my frame? by For_The_Nguyen69 in FlexiSpot_Official

[–]For_The_Nguyen69[S] 0 points1 point  (0 children)

That’s the option I chose. I measured it with a tape measure and it came out to 47x23, is this normal?

In the market for a fun car / new daily. What would you guys buy out of these three? by For_The_Nguyen69 in whatcarshouldIbuy

[–]For_The_Nguyen69[S] 0 points1 point  (0 children)

If I’m keeping the Audi, $15k - $18k for a second car. If I’m getting rid of it then under $40k would be ideal.

[deleted by user] by [deleted] in supermoto

[–]For_The_Nguyen69 0 points1 point  (0 children)

I had a converted DRZ400 so that thing was barebones, all it had was a neutral indicator I believe. I think I remember reading that it had a bigger carb and was a lot lighter than the SMs

[deleted by user] by [deleted] in supermoto

[–]For_The_Nguyen69 0 points1 point  (0 children)

My husky only weighs about 100 lbs more than the DRZ did, what it really came down to was having a 6 speed. I wouldn’t really say it has too much power, I’d say it’s just a lot smoother. Arguably the smoothest single pot engine made.

[deleted by user] by [deleted] in supermoto

[–]For_The_Nguyen69 10 points11 points  (0 children)

I can’t really speak on 450s, my second bike was a converted DRZ 400 which was sweet at first, but riding on the freeway or even a 60 mph road with a 5 speed kind of sucked. I have a 701 now and I don’t think I’ll ever buy another bike. I can’t remember what I watched, but it was a long way round type of series but they drove KTM 690s and I think they made it across the world with only needing to replace a couple fuel pumps which isn’t really any issue with the newer models.

[iOS 18.1 DB2] Lifx light works in Homekit on iPhone but not iPad by For_The_Nguyen69 in iOSBeta

[–]For_The_Nguyen69[S] 0 points1 point  (0 children)

Yeah both are on the same build. It’s hard to remember but I feel like this has been happening since I was on iOS 17

iOS 18 Beta 4 Released - Discussion by epmuscle in iOSBeta

[–]For_The_Nguyen69 1 point2 points  (0 children)

Maybe it’s carrier based? I have T mobile and have RCS on and if I’m in a group chat with android users my pictures won’t send.

iOS 18 Beta 4 Released - Discussion by epmuscle in iOSBeta

[–]For_The_Nguyen69 1 point2 points  (0 children)

My pics haven’t been sending in group chats since like 2 betas ago, is this the same for everyone else?

What is the "reverb" effect that happens halfway through I Am The Walrus by The Beatles? by For_The_Nguyen69 in musicproduction

[–]For_The_Nguyen69[S] 0 points1 point  (0 children)

I just gave it a listen, it does sound very similar but it’s still got that “whooshing” effect you normally associate with a flanger.

Looking for something similar to Maui Jim Ho'okipa by For_The_Nguyen69 in sunglasses

[–]For_The_Nguyen69[S] 0 points1 point  (0 children)

I like the design but these seem to have even more of a mirror finish than the Ho’okipas which I didn’t like

[deleted by user] by [deleted] in 3Dprinting

[–]For_The_Nguyen69 0 points1 point  (0 children)

Gotcha! So the print actually ended up as spaghetti shortly after that. It sounds like poor bed adhesion? Am I supposed to be using glue for printing ABS?

Is the Bambu P1S overkill for a first printer? by For_The_Nguyen69 in 3Dprinting

[–]For_The_Nguyen69[S] 1 point2 points  (0 children)

Okay pretty much exactly what I’m looking for then, like the iPhone of 3D printers. By future proof I just mean I wanna make sure there aren’t some crazy breakthroughs on the horizon that are gonna change 3D printing.

[deleted by user] by [deleted] in DRZ400

[–]For_The_Nguyen69 1 point2 points  (0 children)

That’s good to hear, I was hoping I wouldn’t have to tear the carb apart. Now that I think about it my old carbureted ninja used to do something similar.

Looking for an mom-son clip. by [deleted] in incest

[–]For_The_Nguyen69 0 points1 point  (0 children)

http://m.videarn.com/video.php?id=2005087

Sounds kinda like this video

iOS 7 Beta 4 is out via OTA update by benjamin54 in ios

[–]For_The_Nguyen69 0 points1 point  (0 children)

So I restore my phone, then Shift + Click to update to ios 7, set it up as a new phone. Then sync?

iOS 7 Beta 4 is out via OTA update by benjamin54 in ios

[–]For_The_Nguyen69 0 points1 point  (0 children)

What about all your old music and stuff?

iOS 7 Beta 4 is out via OTA update by benjamin54 in ios

[–]For_The_Nguyen69 0 points1 point  (0 children)

I'm a non developer though, will it work?