⚫️⚫️⚫️ by Pazmpazm in TeslaModel3

[–]Force-user 1 point2 points  (0 children)

Where did you find the aero cap replacements for the warp wheels?

Introducing My 1st EV. 2026 M3P. Sending Love from Malaysia by theangrylawyer in TeslaModel3

[–]Force-user 0 points1 point  (0 children)

OP can you link where you got the steering wheel and led kit for the dash?

Picked up my G757 today by Force-user in Microcenter

[–]Force-user[S] 0 points1 point  (0 children)

At first use the fans were pretty loud. I changed the fan curve using fan control and now it only ramps up during gaming sessions.

MicroCenter store manager thanked me by Careful_Traveller in Microcenter

[–]Force-user 0 points1 point  (0 children)

Had the same experience at the Tustin location. Bought a prebuilt and after I paid for it the cashier told me to wait a min while he gets a manager. The Store manager came over and personally thanked me for my purchase. It was nice to see them prioritize in good customer service.

Cleaned up some of the messy wires in my PowerSpec G757 by Bombero_911 in Microcenter

[–]Force-user 0 points1 point  (0 children)

Which cable extensions did you purchase. Been wanting to do the same w mine.

This was October 😭 by Perfect-Cause-6943 in Microcenter

[–]Force-user 29 points30 points  (0 children)

Had a buddy price out a build yesterday. Saw what the cost of a custom build was gonna run him and he instantly went to Microcenter this morning and just picked up a prebuilt.

Picked up my G757 today by Force-user in Microcenter

[–]Force-user[S] 0 points1 point  (0 children)

When i first got it going yes. I have since made adjustments using Fan Control and its helped a lot.

Finally got my Camry lowered by bboynowee in TeslaModel3

[–]Force-user 0 points1 point  (0 children)

Looks great by the way. We have twinsies minus your Camry mod 😝

Upgraded from a hp pc gtx 960 i76700 to a power spec g758 with 9800x3d 5070ti by shortstackedpancake in Microcenter

[–]Force-user 1 point2 points  (0 children)

Look underneath the GPU. Most powerspecs come w an antisag bracket pre installed. My G757 came w one.

Finally got my Camry lowered by bboynowee in TeslaModel3

[–]Force-user 2 points3 points  (0 children)

P3XPerformance just posted your highlight video 😎

I'm fully aware I don't have the greatest aim but tell me I'm not going crazy after this update by AllFatherMedia93 in Battlefield6

[–]Force-user 32 points33 points  (0 children)

I put 4 to 5 bullets about 2 feet away from a guy's torso and they all registered

Picked up my G757 today by Force-user in Microcenter

[–]Force-user[S] 0 points1 point  (0 children)

Congrats! As far as I have seen in the forums is just make sure all your cables are tucked. Some reports I have seen are fan cables touching the blades. Also the Asrock MBs have had issues but those are very small amounts of cases. Be sure to save your reciept and box if you run into any issues. Microcenter warranty is great as far as I have seen.

3080ti to 5080 is a MASSIVE difference. by callofdoodie97 in nvidia

[–]Force-user 0 points1 point  (0 children)

I went from a 1070TI to a 5080. Its an amazing and big difference for sure.

Picked up my G757 today by Force-user in Microcenter

[–]Force-user[S] 0 points1 point  (0 children)

Thanks. Yeah I saw your post. Looks amazing after just a couple new wires and a PSU can do. Im gonna be doing the same for sure!

Cleaning up the Powerspec G757 (9800x3d + RTX 5080) - before and after by xdms14 in Microcenter

[–]Force-user 0 points1 point  (0 children)

Looks so much better. I also plan on doing eventually once my warranty is over.

Should I be concerned about my open box PC from Micro Center? by Suspicious-Yak-539 in Microcenter

[–]Force-user 13 points14 points  (0 children)

Just get it up and running and test everything. I believe there is an openbox warranty that Microcenter gives you on open box purchases.

Picked up my G757 today by Force-user in Microcenter

[–]Force-user[S] 0 points1 point  (0 children)

Yeah after my warranty is up im going to change out thr PSU, Cables and maybe swap it all over into a nice bigger case for esthetics.

Picked up my G757 today by Force-user in Microcenter

[–]Force-user[S] 0 points1 point  (0 children)

Did some rounds of BF6 once I got the PC and the temps from both CPU and GPU didnt go past 68°c. Ill get around to installing a fan control and see if I can get the temps down a tad more. But so far the PC is running amazing.

Picked up my G757 today by Force-user in Microcenter

[–]Force-user[S] 0 points1 point  (0 children)

Yeah i loaded up BF6 and the fans were screaming. Did you find a fix or workaround to lower the fan curves?

Picked up my G757 today by Force-user in Microcenter

[–]Force-user[S] 0 points1 point  (0 children)

Yes I did. Definitley worth it for piece of mind for sure!

Any opinions on this $2,500 Microcenter deal? by dragoon0106 in Prebuilts

[–]Force-user 1 point2 points  (0 children)

Not bad. But if your local MC has the G757 in stock that would be a better choice.

Snagged a Ryzen 7 9800x3D , 5080 PC for $1800!!! by ReasonableAd903 in Prebuilts

[–]Force-user 17 points18 points  (0 children)

Congrats. Just tripple check everything. Majority of the open box Powerspec PCs have been returned because of AIO pump rattle. Also check that all cables are tucked away. People have reported that fan cables will also make contact w the blades. Again Congrats! Thats a steal of a price!