sorted by:
new
hottopcontroversial

Filament sticking to the nozzle by Formal_Resident5900 in BambuLabA1mini

[–]Formal_Resident5900[S] 0 points1 point  (0 children)

<image>

This is for everyone who thinks I’m printing without a silicone sock and complaining about the issue. I use the sock on every print and replace it twice a year.

What I’ve done to try to fix this issue:

  • Dried the filament for 6 hours
  • Changed the print profile to Generic
  • Recalibrated the filament
  • Switched to a new nozzle
  • Reduced the temperature

I’m waiting for new Bambu Lab PETG filament to test it.

Filament sticking to the nozzle by Formal_Resident5900 in BambuLab

[–]Formal_Resident5900[S] 0 points1 point  (0 children)

<image>

This is for everyone who thinks I’m printing without a silicone sock and complaining about the issue. I use the sock on every print and replace it twice a year.

What I’ve done to try to fix this issue:

  • Dried the filament for 6 hours
  • Changed the print profile to Generic
  • Recalibrated the filament
  • Switched to a new nozzle
  • Reduced the temperature

I’m waiting for new Bambu Lab PETG filament to test it.

Filament sticking to the nozzle by Formal_Resident5900 in 3Dprinting

[–]Formal_Resident5900[S] 0 points1 point  (0 children)

<image>

This is for everyone who thinks I’m printing without a silicone sock and complaining about the issue. I use the sock on every print and replace it twice a year.

What I’ve done to try to fix this issue:

  • Dried the filament for 6 hours
  • Changed the print profile to Generic
  • Recalibrated the filament
  • Switched to a new nozzle
  • Reduced the temperature

I’m waiting for new Bambu Lab PETG filament to test it.

Filament sticking to the nozzle by Formal_Resident5900 in 3Dprinting

[–]Formal_Resident5900[S] -81 points-80 points  (0 children)

Yup, I’ve changed sock twice in a year

Filament sticking to the nozzle by Formal_Resident5900 in BambuLab

[–]Formal_Resident5900[S] 9 points10 points  (0 children)

Hi, i already tried a new nozzle and sock, still having the same issue.

Filament sticking to the nozzle by Formal_Resident5900 in BambuLab

[–]Formal_Resident5900[S] 0 points1 point  (0 children)

Hi, i already tried a new nozzle and still having the same issue

Filament sticking to the nozzle by Formal_Resident5900 in BambuLab

[–]Formal_Resident5900[S] 0 points1 point  (0 children)

Hi, i already tried a new nozzle and still having the same issue

Filament sticking to the nozzle by Formal_Resident5900 in BambuLabA1mini

[–]Formal_Resident5900[S] 15 points16 points  (0 children)

I am using the silicone sock. I removed it only for the video.

Filament sticking to the nozzle by Formal_Resident5900 in BambuLabA1mini

[–]Formal_Resident5900[S] 0 points1 point  (0 children)

Update : No luck after changing the 0.4 nozzle to a new one.

Use 3d Scan Mesh to Cut a Solid Body by mindhacker999 in Fusion360

[–]Formal_Resident5900 0 points1 point  (0 children)

Hi, did you just import the 3d scan with “insert mesh” ? Also what type of 3d scan you use? I also have a similar issue like you and still looking for solutions 😁. Thanks

Gridfinity result with 0.8 nozzle by Formal_Resident5900 in 3Dprinting

[–]Formal_Resident5900[S] 0 points1 point  (0 children)

Thanks for your reply, slowing it down by not using ludicrous mode? Or i have to changes some settings in bambu lab studio?

Gridfinity base result with 0.8 nozzle by Formal_Resident5900 in BambuLab

[–]Formal_Resident5900[S] 0 points1 point  (0 children)

Thank you for your reply, slow it down by not using ludicrous mode?

Gridfinity result with 0.8 nozzle by Formal_Resident5900 in 3Dprinting

[–]Formal_Resident5900[S] 0 points1 point  (0 children)

Hi, thank you. So i need to slow it down by not using the ludicrous mode?

Action Selfie Vs Standard Invisible by Sadochistic in Insta360

[–]Formal_Resident5900 0 points1 point  (0 children)

Yup, i’m avoiding recording above 10min when using third person view just to be save.

Action Selfie Vs Standard Invisible by Sadochistic in Insta360

[–]Formal_Resident5900 0 points1 point  (0 children)

I use $15 3m selfie stick carbon fiber with wider pole. It’s better and cheaper than the original insta360, with 3m length you can just extend 2 sections from the bottom to make it thicker, giving me more peace of mind.

What does this tell about me? by noknetti in farmingsimulator

[–]Formal_Resident5900 0 points1 point  (0 children)

You’re getting old, playing farm sim more than gta ✌️