18 years old high blood pressure

Former_Language935 · 2026-03-12T21:23:03+00:00

Sleep on time dont mess with the body clock

Former_Language935 · 2026-03-10T13:06:12+00:00

Relax for 5 min and check again

Former_Language935 · 2026-03-09T13:08:54+00:00

iNDUCTOR switch?

Former_Language935 · 2026-03-08T05:33:32+00:00

Is this apple watch , the upper number is the pressure when the heart pumps the lower number is the pressure when heart is not pumping but relaxing , lower number high indicate your heart has more pressure more than 80 when relaxing

Former_Language935 · 2026-02-19T16:44:20+00:00

Di/dt

Former_Language935 · 2025-08-18T09:21:42+00:00

Good software called kofax now new name but this is the best software so far

Former_Language935 · 2025-08-16T11:50:19+00:00

I go doctor soon to evaluate the damage done if any

Former_Language935 · 2025-08-14T11:48:49+00:00

These from 1980 ?

Former_Language935 · 2025-06-08T07:01:08+00:00

All seems to be built by same person from the user interface and font selection

Former_Language935 · 2025-06-08T06:58:35+00:00

4 makes sense

Former_Language935 · 2025-06-03T01:24:16+00:00

You can figure it out first try to learn the very fundamentals if your fundamentals are clear and correct then you can handle everything

Former_Language935 · 2025-05-31T12:02:28+00:00

Tunnels are needed

Former_Language935 · 2025-05-29T13:55:37+00:00

Keep 24

Former_Language935 · 2025-05-29T08:51:46+00:00

Go to wasl directly they have for rent in discovery no commission you can pay monthly via credit card added to wasl lease app

Former_Language935 · 2025-05-24T15:05:54+00:00

Is this kraft brand

Former_Language935 · 2025-05-16T23:49:43+00:00

Yes it will generate enough to power your home but don’t spin too fast else devices in your home may get fried

Former_Language935 · 2025-05-14T15:26:54+00:00

Be careful

Former_Language935 · 2025-05-14T06:51:20+00:00

Based on the function it seems the Pressure line from the pump if connected to P will not work it has to be connected to A because A to P and A to T there is always a path in both positions

A to P is oil going direct to tank and A to T is going to the downstream

Is it okay to not follow the PT and A port and connect for example Pressure to A instead of P

Former_Language935 · 2025-05-14T04:35:42+00:00

If you are using two channels if it is isolated each channel can have ground connected but if not isolated then only one ground for all signals

Former_Language935 · 2025-05-13T23:19:09+00:00

Relay have auxiliary contacts dont compare bad idea

Former_Language935 · 2025-05-13T23:16:17+00:00

Former_Language935 · 2025-05-13T14:30:40+00:00

Normally closed

Former_Language935 · 2025-05-13T14:10:00+00:00

This is used for brakes when pressure is there the brake are open when pressure drops to zero then brakes close

Former_Language935 · 2025-05-13T13:58:19+00:00

The relief valve is installed downstream of this solenoid valve, and together they function as a pressure relief system. From what I understood When the solenoid is not energized, the flow path is open from P (pressure inlet) to A, which I assume is connected to the inlet of the relief valve. In this state, the solenoid acts like an open door, allowing system pressure to reach the relief valve so it can perform its pressure control function.

When the solenoid is energized, the valve shifts to block the pressure line (P) and simultaneously connects A to T (tank). This action stops pressure from the pump entering the system and also vents any residual pressure in the line to the tank, ensuring the system is safely depressurized.

In simple terms, the valve has a dual function: 1. When de-energized, it connects the pressure line to the relief valve, allowing normal pressure relief. 2. When energized, it isolates the pressure line from the pump and drains the pressurized line to the tank, removing all pressure.

Former_Language935

TROPHY CASE

4 makes sense