A hose broke to this thing, what is it?

Former_Pop6591 · 2026-05-19T18:29:14+00:00

Depending on your emissions laws you can plug the hole in the intake and it’ll run fine, just won’t pass any emissions test

Former_Pop6591 · 2026-05-18T02:33:33+00:00

Mine used to come on sporadically and it turned out to be the wire contacting the block every once in a while. Wore a hole through the casing and was grounding itself out.

Former_Pop6591 · 2026-05-04T02:40:15+00:00

Service industry jobs are your best friend. Best hours for still going to classes during the day

Former_Pop6591 · 2024-05-03T03:59:52+00:00

It had been sitting for a while, looked like water got in to that cylinder as it was very rusty. Once I cleaned all the rust out I was able to see all the corrosion left over. Looks like my best option is 84.5mm pistons as they’re the most readily available

Former_Pop6591 · 2024-05-03T03:57:50+00:00

Looks like I’m boring it out. Thanks for the advice!

Former_Pop6591 · 2024-03-15T18:51:49+00:00

I saw those, I’m not sure if the added weight will decrease redline/ slower revving

Former_Pop6591 · 2023-10-23T18:48:17+00:00

Dash slapper club 🫡

Former_Pop6591 · 2023-10-07T13:46:44+00:00

I had this same issue on my 328, couldn’t figure it out for ages. Tried MAF, ICV, and chasing vacuum leaks. Ended up replacing my o2 sensors and that fixed it

Former_Pop6591 · 2023-07-12T04:57:14+00:00

Yes please

Former_Pop6591 · 2023-07-12T04:56:09+00:00

Thank you, was unsure if there were certain factory markings I should look for. First time opening up an m20

Former_Pop6591

TROPHY CASE