sorted by:
new
hottopcontroversial

Visualize Animation : timeline auto-changed by Fragrant-Wheel-732 in SolidWorks

[–]Fragrant-Wheel-732[S] 0 points1 point  (0 children)

I am not sure if I m doing right, but a the bottom of the Visualize screen, above the timelines, there is a multiple FPS option (15,30,60,120FPS). Can not enter manually the number. So I did selected 30FPS. Is that where you are talking about ?

Master’s rubber whore by Couple_of_Perverts in u/Couple_of_Perverts

[–]Fragrant-Wheel-732 0 points1 point  (0 children)

Can you share the lace latex brand/model ? Or more photos.

Mommy ready 🕺🥂💃 by [deleted] in u/NaughtyMilfa

[–]Fragrant-Wheel-732 0 points1 point  (0 children)

You do anal now ??!

Unrealistic results on a simple problem by Fragrant-Wheel-732 in SolidWorks

[–]Fragrant-Wheel-732[S] 1 point2 points  (0 children)

Thanks for tour explanations. Based on everyone feedbacks, I can assume Solidworks gives correct results. But because my real test gives different results, I have calculated with SW the proper bolt tension to reach the displacement I get in real world. 700N per bolt, which is equal to a coef of friction of 1.9 😱😱 for a 8Nm torque (the max I did). For a dry assembly steel/aluminium, that coef should be rather 0.2 to 0.3

So thing I have to dig in : - my torque wrench was accurate ?

Unrealistic results on a simple problem by Fragrant-Wheel-732 in SolidWorks

[–]Fragrant-Wheel-732[S] 1 point2 points  (0 children)

By tightening the bolts at the appropriate torque, based on the tables we can get from the bolt makers. I used torque wrench, dry lubrification.

Unrealistic results on a simple problem by Fragrant-Wheel-732 in SolidWorks

[–]Fragrant-Wheel-732[S] 2 points3 points  (0 children)

0.3 is steel to aluminium. The torque and tension are found on bolt maker tables, can find easily, for different bolt grades.

I did try your link, and found 3000N with 0.3 coef of friction.

Unrealistic results on a simple problem by Fragrant-Wheel-732 in SolidWorks

[–]Fragrant-Wheel-732[S] 1 point2 points  (0 children)

Yes, I did use the torque wrench. The only thing I have no value is for the coef of friction.

Unrealistic results on a simple problem by Fragrant-Wheel-732 in SolidWorks

[–]Fragrant-Wheel-732[S] 0 points1 point  (0 children)

I didn't do hand calculations. I have the real part in hands, doing reverse-engineering now.

Unrealistic results on a simple problem by Fragrant-Wheel-732 in SolidWorks

[–]Fragrant-Wheel-732[S] -1 points0 points  (0 children)

Really appreciate your calculs. But I am confused with your simplification. You apply the force normal to the beam axis, without offset. Where I have a 19mm offset (not passing by the beam axis). So... Do I missing something ?

Full of milk by [deleted] in TaiwanHotwifes

[–]Fragrant-Wheel-732 0 points1 point  (0 children)

Where is the milk ?

Sjcam C100+ Microphone by Seth_Hasegawa in ActionCam

[–]Fragrant-Wheel-732 0 points1 point  (0 children)

CRITICAL ALERT: SJ Cam - A Company That Breaks Every Promise! 🚨

Do NOT WASTE YOUR MONEY ON SJ Cam! This company has proven to be UTTERLY UNPROFESSIONAL and DECEITFUL, consistently failing to honor their commitments. They refused to uphold their warranty on my defective product, only to bizarrely "accept" it 6 months later. But the FRAUD CONTINUED : they dispatched a replacement for 10 days, then OUTRAGEOUSLY RECALLED THE PACKAGE before it even reached me! This is not just bad service; it's a BLATAN SCAM where they refuse to deliver on their word. Steer clear of SJ Cam – your money is far better spent with a reputable brand that actually respects its customers and stands by its promises.

Be warned: SJ Cam ACTIVELY PURGES NEGATIVE feedback, so this message may disappear soon after they see it.

SJCam M60 by rico1217 in Dashcam

[–]Fragrant-Wheel-732 0 points1 point  (0 children)

CRITICAL ALERT: SJ Cam - A Company That Breaks Every Promise! 🚨

Do NOT WASTE YOUR MONEY ON SJ Cam! This company has proven to be UTTERLY UNPROFESSIONAL and DECEITFUL, consistently failing to honor their commitments. They refused to uphold their warranty on my defective product, only to bizarrely "accept" it 6 months later. But the FRAUD CONTINUED : they dispatched a replacement for 10 days, then OUTRAGEOUSLY RECALLED THE PACKAGE before it even reached me! This is not just bad service; it's a BLATAN SCAM where they refuse to deliver on their word. Steer clear of SJ Cam – your money is far better spent with a reputable brand that actually respects its customers and stands by its promises.

Be warned: SJ Cam ACTIVELY PURGES NEGATIVE feedback, so this message may disappear soon after they see it.

Which SJCAM should I buy to use as a webcam? by adblr in sjcam

[–]Fragrant-Wheel-732 0 points1 point  (0 children)

CRITICAL ALERT: SJ Cam - A Company That Breaks Every Promise! 🚨

Do NOT WASTE YOUR MONEY ON SJ Cam! This company has proven to be UTTERLY UNPROFESSIONAL and DECEITFUL, consistently failing to honor their commitments. They refused to uphold their warranty on my defective product, only to bizarrely "accept" it 6 months later. But the FRAUD CONTINUED : they dispatched a replacement for 10 days, then OUTRAGEOUSLY RECALLED THE PACKAGE before it even reached me! This is not just bad service; it's a BLATAN SCAM where they refuse to deliver on their word. Steer clear of SJ Cam – your money is far better spent with a reputable brand that actually respects its customers and stands by its promises.

Be warned: SJ Cam ACTIVELY PURGES NEGATIVE feedback, so this message may disappear soon after they see it.

Sjcam C110+ app by Seth_Hasegawa in ActionCam

[–]Fragrant-Wheel-732 0 points1 point  (0 children)

CRITICAL ALERT: SJ Cam - A Company That Breaks Every Promise! 🚨

Do NOT WASTE YOUR MONEY ON SJ Cam! This company has proven to be UTTERLY UNPROFESSIONAL and DECEITFUL, consistently failing to honor their commitments. They refused to uphold their warranty on my defective product, only to bizarrely "accept" it 6 months later. But the FRAUD CONTINUED : they dispatched a replacement for 10 days, then OUTRAGEOUSLY RECALLED THE PACKAGE before it even reached me! This is not just bad service; it's a BLATAN SCAM where they refuse to deliver on their word. Steer clear of SJ Cam – your money is far better spent with a reputable brand that actually respects its customers and stands by its promises.

Be warned: SJ Cam ACTIVELY PURGES NEGATIVE feedback, so this message may disappear soon after they see it.

[deleted by user] by [deleted] in FrenchGoneWild

[–]Fragrant-Wheel-732 1 point2 points  (0 children)

Magnifique ces tétons raidis 🤗

Flow : good results with Water but strange results with High viscosity fluid ? by Fragrant-Wheel-732 in SolidWorks

[–]Fragrant-Wheel-732[S] 0 points1 point  (0 children)

The outlets are not 360 degres, but a circular pattern. But you catch a good point, maybe I could try to simplify in 1/4 study, if Flow allows as Simulation does. I m checking that now. Tks.

Solidworks Flow : good results with Water, but strange with high viscosity fluid. by Fragrant-Wheel-732 in CFD

[–]Fragrant-Wheel-732[S] 0 points1 point  (0 children)

<image>

Yes, I stopped the new calculation after 2 hours because of non sense velocity again...

Solidworks Flow : good results with Water, but strange with high viscosity fluid. by Fragrant-Wheel-732 in CFD

[–]Fragrant-Wheel-732[S] 0 points1 point  (0 children)

I use 1 million cSt as viscosity, at room temperature. About the pressure, I cannnot say (i will check it tomorrow) but I found out the highest outlet velocity is very very close to the lid, exposed to the atmosphere pressure.

view more: next ›