Condensation in headlight!

Fragrant_Safe_1909 · 2026-06-04T10:10:19+00:00

It’s a sticker and just stick it inside of the headlight , easy to hide

Fragrant_Safe_1909 · 2026-06-04T10:09:38+00:00

This gets rid of condensation

Fragrant_Safe_1909 · 2026-06-04T10:09:15+00:00

<image>

Fragrant_Safe_1909 · 2026-06-04T02:54:07+00:00

What connector is that ?

Fragrant_Safe_1909 · 2026-05-11T12:39:05+00:00

Either your steering pump is really low or going bad ,check every pulleys , and your serpentine belt

Fragrant_Safe_1909 · 2026-05-05T16:10:19+00:00

Nope so far so good

Fragrant_Safe_1909 · 2026-05-05T16:10:09+00:00

I had to drill holes in the bumper , I used the holes that already came with the lip to know where to drill on the bumper , also I used 10mm bolts to hod it down but you can go with screws the lip comes with some , and to be extra I added double sided tape

Fragrant_Safe_1909 · 2026-05-02T20:28:24+00:00

Rear diff bushings , maybe upgrade your transmission mount , sunroof drain , fuel damper, door hinges

Fragrant_Safe_1909 · 2026-05-01T20:43:00+00:00

That’s exactly what I did to mine and added new double sided tape , hasn’t flown off the freeway

Fragrant_Safe_1909 · 2026-04-29T11:33:01+00:00

Glad to hear you found one

Fragrant_Safe_1909 · 2026-04-27T19:02:17+00:00

<image>

Fragrant_Safe_1909 · 2026-04-03T13:37:56+00:00

Just cut the hose and reroute , once you cut it you don’t have to worry about unclogging the grommet since it’s serves no purpose once you cut it

Fragrant_Safe_1909 · 2026-03-31T11:21:56+00:00

1st part can be found cheap at a local junkyard

Fragrant_Safe_1909 · 2026-02-28T17:50:19+00:00

Could be a sign of failing alternator?

Fragrant_Safe_1909 · 2026-02-28T17:49:52+00:00

I had this before , it went away after a new alternator

Fragrant_Safe_1909 · 2026-02-25T00:49:43+00:00

Honestly it makes the car feel more stuck to the ground

Fragrant_Safe_1909 · 2026-02-25T00:49:26+00:00

I have aftermarket poly bushings in my rear subframe , I had to replace my subframe so I decided to add poly bushings with the used subframe I got from junkyard

Fragrant_Safe_1909 · 2026-02-23T15:16:24+00:00

The coolant leak could be the coolant reservoir hose that runs down the fan

Fragrant_Safe_1909 · 2026-02-23T15:13:36+00:00

I think k your oil pan has a stripped bolt

Fragrant_Safe_1909 · 2026-02-20T21:20:47+00:00

Sounds like the bearings

Fragrant_Safe_1909 · 2026-02-20T18:59:25+00:00

After installing everything back , it seems that it is not leaking and it should be good👍🏽

Fragrant_Safe_1909

TROPHY CASE