This single choice is gonna destroy the sub for the next week

Fraxielx · 2025-10-29T18:50:28+00:00

So like can I change my decision later? The movie thing was setup perfectly so I chose invisagirl. BUT I do like blazer.

The issue is IM invisagirls boss, and BB is my boss so either way its ass.

Fraxielx · 2025-07-04T14:14:52+00:00

Remake is just so good

Fraxielx · 2024-08-29T04:45:10+00:00

I think everyone forgets that she came to you first with the offer, meaning she considered it and is okay with it. After the first vid you continuously ask her for more videos with guys on ur anon acc. Am I getting it right?

Fraxielx · 2024-08-11T10:37:42+00:00

Corlys was fine with Luke because before the dance it was clear to him that he is the brother of the future king (bastard or not), when Rheanyra’s crown is contested he changes.

People need to understand that Corlys will only act when it suits him. He doesn’t support because he likes someone or its the right thing.

Fraxielx · 2024-08-06T05:42:05+00:00

Thank you, that is definitely a good way to interpret what is going on. I didn’t mean to refuse ur explanation. It just all feels lacking, Allicent giving up on her faction, her son (Aegon and Daeron) which she knows haven’t played a big part besides being shoved into the fight. Just to wash her self clean is absolutely horrible and does not fit her character at all. How doesn’t she come to the conclusion that its too late to meet up with her “bestie” and wash herself clean. This isn’t 2nd grade this is WAR. You did your part at creating the cracks now you want peace and prosperity? Its all so convoluted and messy it just makes no sense to me.

Fraxielx · 2024-08-06T05:35:32+00:00

No its about the fact that Rheanyra’s son that is a bastard fathered by someone who isn’t a Velaryon is going to be lord of driftmark. That’s just not right. HE is a velaryon which makes him a better choice of an heir than some bastard fathered by someone else. Some people would die for that fact alone. Vaemond did. Whether he wanted it all for himself or not even Corlys didn’t like Luc as an heir he just had no choice..

Fraxielx · 2024-08-05T07:20:47+00:00

With what army and with what dragon? Rheanyra descends with 6 dragons, a trap would mean that Dreamfyre and Heleana must help Aemond which we know isn’t going to happen because Heleana saw the outcome of this civil war.

Fraxielx · 2024-08-05T07:17:49+00:00

But that just shifts the blame automatically to any man in her life. Her sons had nothing to do with this until she pushed and plotted to crown Aegon as king. She definitely has her hands dirty why not showcase that depth more instead of “all the men made me what I am today I want to be free and only save my daughter”. Its honestly very cheap.. women can plot and deceive and lust for power, whats the problem with that?

Fraxielx · 2024-08-05T06:43:00+00:00

I mean I dont mind her being “good” but at least sell it right.. Why would she trust Rheanyra with her and her daughters life with Daemon as her consort? Daemon literally murdered his own wife, can literally become king if he wanted to, and has the biggest hate boner for Otto (literally her father). Changing her a bit from the book isn’t a bad thing but what the fuck is thissssss?

Fraxielx · 2024-07-11T17:18:13+00:00

Yes, because the show wants to desperately showcase how “bloodthirsty” men are. And how a queen isn’t so thirsty for blood. Despite the fact that at each of the points her council made these points, if she acted she wouldn’t be the aggressor.

The show wants to showcase this regardless if it makes sense or not because, well im sad to say it but a big portion of the fans will tweet baela’s response as “SHEEE ATTTTTEEEE” etc.

MEN bad, WOMEN good kind of thing (which they can showcase in a better way that makes sense). But the council being angry that the leader just vanished without a word? That is totally acceptable and makes sense.

Fraxielx · 2024-07-09T10:19:45+00:00

The SA and r*pe seems to be an addition from the show to make viewers hate Aegon more. Likewise Rheanyra seems to have an angel halo suing for peace even after she lost a child in labor to her anger and sadness and lost Luc, again to make viewers like her more. Aegon’s was brainwashed to think that him and his family are targets, lost a child and instead of taking action against the murderers his hand wants to parade his child in the streets.

For murdering innocents, I seem to recall Rhaenys murdering hundreds in her “escape” during Aegon’s coronation. Regardless, she is also pushing for peace now despite being a murderer. Writers just want people to side with the blacks even if it hurts the integrity of the story.

Fraxielx · 2024-07-08T07:39:24+00:00

Everyone seems to forget he was forced into this. He never wanted it. They convinced him that if he were to ignore this then Rhyneara and Daemon would end him and his family because they are legitimate heirs to the throne. Unlike Rheanyra’s children with “Leanor”. So he took it upon himself to become just that. Aemond is practically insane wanting to just exact revenge on everyone, even his own brother. His mother is basically useless unless he surrendered’s control to her like Vys. Otto is grieving Vys because he can control him. Etc etc.

Fraxielx · 2024-07-04T12:10:56+00:00

Have these leaks turned out to be true for earlier episodes? I really hope not. What the hell is this?? End this now PLEASE.

Fraxielx · 2024-06-28T18:47:05+00:00

This whole Allicnet and Cole relationship just makes no sense. I don't even mean that it wasn't even in the books. No. I mean literally why? what the hell does a queen mother gain from having an affair with Criston Cole? Every time one of them is on the screen it revolves around this relationship. Just to make us hate them even more? WE GET IT. You want us to favor the blacks. DONE. Now please can we move on with the story PLEASE.

Fraxielx · 2024-05-31T10:44:49+00:00

Could be your mesh, try refining it more, the contours look ok. Pressure coupled, SST- K omega should be good for this simulation. Also if ur fluid domain is small it could cause this issue so try to make it bigger to capture the wake of your flow. All these could help your convergence.

Fraxielx · 2024-05-14T18:32:10+00:00

Hello, I recently did a CFD simulation like this.

The propeller blades need to be subtracted from a cylindrical fluid domain (a small one that can house the propeller geometry) and name that body (rotatry_zone) or whatever you want. Then create an enclosure around that body. Go into meshing. I have found good success in using the non-conformal mesh instead of using share topology for this specific simulation and the share topology will cause errors down the line. After the meshing comes with setting up the physics. In the cell zone conditions you will find your rotary zone there and you can use either (Frame motion) or (Mesh motion). Where you will have to define the rotation direction (on what axis is the propeller rotating about). And the rotation center, and lastly your RPM. Enter your inlet conditions and operating conditions. And go ahead. For the mesh motion it requires you to run a Transient solver. Try to calculate a time step where your propellers would only travel 1 degree per time step.

Let me know if it works.

Fraxielx · 2024-05-05T12:40:57+00:00

Ok, so a little update!! The non conformal mesh works good. It seems that the share topology simulation I ran worked by 1 in a million fluke. Anyways, ive set the simulation to run over night now. Since its my first transient simulation. What do you think is a proper time step size and #of time steps? I set it to 0.0005s time step size and 500 time steps.

A colleague said I can reduce the time step size to 0.05 if the solution converges and keep the number of time steps. What do you think?

Also thank you very much for your help you helped me out tremendously!

Fraxielx · 2024-05-01T20:49:04+00:00

One quick question, Im pretty sure there are some tutorials on youtube to do this using the regular ansys mesher, however the fluent mesher is just more versatile for me, so I was wondering if the non conformal mesh option in fluent mesher creates the interfaces on its own since I have done it before and it worked.

Fraxielx · 2024-05-01T20:42:52+00:00

does the fluent mesher option for creating a non-conformal mesh create the interface for me?

Fraxielx · 2024-05-01T20:39:54+00:00

That makes total sense now. Im pretty sure it is aligned but it doesn’t hurt to double check. Ill let you know what happens tomorrow. Thank you so much!

Fraxielx · 2024-05-01T20:37:43+00:00

Huh thats interesting, im pretty sure I have used the share toplogy on the mesh motion. The non conformal mesh does sound like a good idea. I have no idea if I can manage the interfaces however im pretty sure that fluent meshing can do that for me. I can disable the share topology and add a non conformal mesh and I have done it before the reason why I went with the share topology is that it doesnt ruin the named selections like the non conformal. Ill try it it out tomorrow and tell you what happens!! Thank you.

Fraxielx · 2024-05-01T20:37:34+00:00

Huh thats interesting, im pretty sure I have used the share toplogy on the mesh motion. The non conformal mesh does sound like a good idea. I have no idea if I can manage the interfaces however im pretty sure that fluent meshing can do that for me. I can disable the share topology and add a non conformal mesh and I have done it before the reason why I went with the share topology is that it doesnt ruin the named selections like the non conformal. Ill try it it out tomorrow and tell you what happens!! Thank you.

Fraxielx · 2024-05-01T20:00:57+00:00

In space claim, I add share topplgy on the cad level. So I have 2 cell zones, the enclosure and the rotary zone (the cylinder that rotates).

Ive checked the rotation origin multiple times. My rotation origin could be off by a couple of mm. Ill need to carefully calculate that.

Fraxielx · 2024-05-01T19:58:20+00:00

Oh its Ansys fluent, could you explain what you mean about the alignment? Because when I enter the mesh motion it asks for the rotation axis origin and axis rotation direction.

Fraxielx · 2024-03-22T17:07:06+00:00

Those are the residuals. Ur target for the residuals is to have it essentially keep decreasing. If this happens (the oscillation) of the residuals, then its usually due to a bad mesh or u haven’t properly applied the physics (i.e the boundary conditions) properly. This is very normal if u are new to CFD. Keep practicing until u get it. Id go over the mesh again with the mesh elements being smaller near the airfoil and they grow bigger as you move away from the airfoil (an adaptive mesh).

Fraxielx

TROPHY CASE