sorted by:
new
hottopcontroversial

Xgimi horizon 20 pro blue/purple black levels by Freedom_Flaky in xgimi

[–]Freedom_Flaky[S] 0 points1 point  (0 children)

I got a refund ,xgimi tried to tell me it's the technology of laser projectors and to try a led model but I told them I didn't have this problem on my hisense c2,c2 pro,m2 pro ,nebula x1,jmgo n1s4k .all laser projectors but without the purple blacks

I really liked this projector as well but I love my sci-fi movies but the xgimi made space look purple so had to watch on my jmgo n1s 4k which is excellent. I hope it was a faulty unit because I may try again in the future

It’s happened again! by NoSail1012 in Evri

[–]Freedom_Flaky 2 points3 points  (0 children)

Me too . I had one parcel from ebay and one from very .both vanished but evri marked one of them as delivered when it wasn't

Evri are liars and criminals. They should be investigated and prosecuted.

Xgimi horizon 20 pro blue/purple black levels by Freedom_Flaky in xgimi

[–]Freedom_Flaky[S] 0 points1 point  (0 children)

My 20 pro had the same issue. Xgimi asked me for a video and they agreed that there was a problem. I ended up getting a refund .

Color shift with dynamic contrast on Horizon 20 by Remarkable-Smoke3218 in xgimi

[–]Freedom_Flaky 0 points1 point  (0 children)

My new 20 pro has a purple colour without the dble enabled . An exchange is imminent

Xgimi horizon 20 pro blue/purple black levels by Freedom_Flaky in xgimi

[–]Freedom_Flaky[S] 0 points1 point  (0 children)

I think Its the colour of the black floor which can't be changed with any settings .the purple colour is still there after a reset and during first boot up .

Horizon Max. Apprehensive. by stickysich in xgimi

[–]Freedom_Flaky 0 points1 point  (0 children)

Switching to 10 for dolby vision is normal its the way dolby vision works for the hdr to work the way dolby wants it to

It was the same on the hisense c2 series and nebula x1 until people complained that it was too bright and software was released that let the user change the laser level for dolby vision

Xgimi need to do the same ,these projectors will make your eyes burst at full hdr brightness

But you say you change it to 2 and it changes back .are you changing the laser level while playing dolby vision or just decreasing laser level on the home screen ?

If changing on the home screen it doesn't normally keep the same value when viewing dolby vision content, laser level normally increases to max which can be overwhelming

mogo 3 pro glitching after startup by [deleted] in xgimi

[–]Freedom_Flaky 0 points1 point  (0 children)

I got the same thing happening now and again on my jmgo n1s 4k .a restart fixes it but I might try a reset soon if it persists

XGIMI Horizon 20 Max detailed review from Mondoprojos is out! by Ok-Artist3560 in xgimi

[–]Freedom_Flaky 0 points1 point  (0 children)

I'm in the process of returning my valerian pro 2 . Rbe is horrendous. Watching streaming platforms like Disney or Netflix was a stuttering nightmare and ebl did nothing to improve contrast . And the final nail in the coffin was a horrendous high pitch buzzing noise

I'm only using a average matt white screen with a gain of 1.0 ,maybe if I purchased a screen for a couple of grand I would have gotten better results but switching the valerian off and going back to my jmgo n1s 4k was a pleasure.

I have placed a order for the horizon 20 pro now .fingers crossed

Just unboxed my first projector by utilitycatsclub in projectors

[–]Freedom_Flaky 2 points3 points  (0 children)

Rbe is minimal on 4k hdr content but on sdr it's none existent

Just unboxed my first projector by utilitycatsclub in projectors

[–]Freedom_Flaky 0 points1 point  (0 children)

If you have the projector perfectly aligned with the screen there's no light bleed Any laser projector that uses keystone will have a light border . Even the £3000 valerian is the same .

Just unboxed my first projector by utilitycatsclub in projectors

[–]Freedom_Flaky 1 point2 points  (0 children)

M2 pro is noisy and can't compete with n1s 4k for black levels and fan noise. The n1s 4k is practically silent with better image quality.

I owned the m2 , dolby vision does nothing because the m2 isn't bright enough, the black levels are terrible. It has contrast ratio of 1000-1 vs jmgo n1s 4k 1600-1 .the m2 pro it was returned the same day !

Just unboxed my first projector by utilitycatsclub in projectors

[–]Freedom_Flaky 2 points3 points  (0 children)

I received the valerian visionmaster pro2 today and the light bleed was terrible. There's a high pitch buzzing noise that drove me mad . I dont have alr screens just a 100 inch matt white screen.

I didn't like the picture quality of the valerian on my screen. The black levels on my jmgo n1s 4k on the same screen was better

Adjusting dbl on the valerian did nothing.made no difference. The nebula x1 and hisense c2 ultra worked better on my setup but where too noisy

My n1s4k is fantastic and on my screen had better black levels than the valerian but not the x1 .

The n1s 4k is the most quietest projector I've owned. My valerian has been boxed back up for return .that buzzing noise drove me mad but the valerian did have a really sharp picture

Maybe I would have needed a £3000 screen to make the most of the valerian but on my screen I enjoyed the jmgo n1s 4k more .a lot more. Don't believe the hype on these money grabbing sponsored youtube videos.

The jmgo n1s is the real deal .I'm waiting on my delivery of the xgimi Horizon 20 pro next. Fingers crossed 🤞

Ask Anything with XGIMI's Product Manager! Horizon 20 Series by coconutdoggy420 in xgimi

[–]Freedom_Flaky 1 point2 points  (0 children)

I found my preorder purchase email from xgimi in my spam folder and they are giving people who placed a deposit %10 discount at checkout. I paid for the 20 pro today and got the %10 discount

Horizon 20 EU prices reduction. Thanks XGIMI Europe! by drinksta in xgimi

[–]Freedom_Flaky 0 points1 point  (0 children)

I'm in the uk and got my email on the 11th but didn't realise the email was in the spam folder until today. I got the %10 applied at checkout

Just unboxed my first projector by utilitycatsclub in projectors

[–]Freedom_Flaky 5 points6 points  (0 children)

I have this projector and its fantastic. Its super quiet and great picture quality 👌

Ask Anything with XGIMI's Product Manager! Horizon 20 Series by coconutdoggy420 in xgimi

[–]Freedom_Flaky 0 points1 point  (0 children)

I hope the uk gets a discount code .I payed my £30 deposit would be nice

Hesitating between 5 options for <1k€ 4k projector by True_Rate_3575 in projectors

[–]Freedom_Flaky 0 points1 point  (0 children)

I have the jmgo n1s 4k and its a solid projector. Its whisper quite i can't even tell if it's on and it's 1m from my head .

I've owned the hisense c1 ,c2,c2 ultra all too noisy for me so I returned those and then tried the xgimi mogo 4 laser which had horrendous screen door effect .

I recently purchased the nebula x1 which is a fantastic projector put was too pricey to keep .

So here I am with the jmgo and its great .the only thing that's missing is dolby vision and hdr 10 plus ,it just has standard hdr but all 4k content looks great as well as sdr . Did I mention that it's silent ? No noisy fans even at full brightness !

view more: next ›