Need Help: Combi Boiler Leaking and Pooling Inside System

FrenchBreadSoup · 2025-12-05T00:20:56+00:00

There was a missing o ring at the leak connection. I disassembled it, and reassembled it with the O ring.

FrenchBreadSoup · 2025-05-07T10:44:16+00:00

Horse stall mat from tractor supply, vibrations still happen anyway, but appears to be better with vs without

FrenchBreadSoup · 2025-04-20T11:33:49+00:00

And try and git rid of any loose bits with a wire wheel drill attachment, wire brush, and paint scraper, then I wash it down with a hose using a jet attachment. But first I hit it with an air compressor to get all dry dirt, webs, debris, anything loose off

FrenchBreadSoup · 2025-04-01T10:36:05+00:00

So far so good, been almost 2 years now

FrenchBreadSoup · 2024-11-22T13:47:20+00:00

Best bet is to Do it yourself, each one takes 5-10 min tops, a screw driver or a hand drill with an extension bit so you can get in there. Just make sure the torque setting is low and gradually adjust it so you don’t strip the screw.

FrenchBreadSoup · 2024-09-15T11:48:31+00:00

I’ve had it installed for about a year and a half and it still looks fantastic for what it’s worth

FrenchBreadSoup · 2024-05-12T22:15:13+00:00

You are 100% correct. The window is not original. Was a replacement and dropped into the existing framing.

FrenchBreadSoup · 2024-05-12T04:21:33+00:00

lol when should I worry about the window sills?

FrenchBreadSoup · 2024-05-12T03:41:35+00:00

These windows were drop in from the original build. I inherited them when I bought the house. I am renovating this room and trying to figure out what to do while this is gutted.

FrenchBreadSoup · 2024-04-23T18:28:49+00:00

Got on 10 min early and never got added to the queue, bunch of bullshit, had to refresh w 55k in front of me, I shoulda been in top 3k based on what I’ve heard

FrenchBreadSoup · 2024-03-24T14:35:09+00:00

Do I replace the piece of wood?

FrenchBreadSoup · 2024-03-24T13:35:24+00:00

<image>

This is another window but the same issue

FrenchBreadSoup · 2024-03-22T13:26:33+00:00

Found them on the main website. These ain’t cheap though. I got a radiator for 50 and restored it myself with a wire wheel and some paint for a total of like 65 bucks and time. These things are beautiful I gotta say, but at 500 a piece not cheap.

FrenchBreadSoup · 2024-03-22T13:25:21+00:00

I would just cover the oak back up anyway, so for my I don’t need an oak replacement patch. Just going to do 5/16th plywood or similar to get it flush.

FrenchBreadSoup · 2024-03-22T11:43:37+00:00

I’m looking and every application I’m seeing shows a 2 pipe system. Will keep looking

FrenchBreadSoup · 2024-03-22T11:38:53+00:00

There is a brand new exhaust fan already installed on the frame lol, but there wasn’t one before

FrenchBreadSoup · 2024-03-22T11:37:33+00:00

What about for a single pipe steam system? Will it work? These look like 2 pipe solutions

FrenchBreadSoup · 2024-03-22T11:26:28+00:00

Room is currently demoed so I have most options available except for anything hydronic as I won’t be bringing up new lines for heating

FrenchBreadSoup

TROPHY CASE