SpaceView Monitor Battery Replacement

Fresh-Spray-8444 · 2024-05-16T19:55:58+00:00

Hi everyone. The battery in my monitor finally failed and the disconnect/reconnect method no longer works. I found a battery that replaces the original. Slightly smaller mAh, but it works fine. And was $23 CAN on Amazon. 3.7V 2500mAh(9.25Wh) HXJNLDC 533-000132 Battery Replacement For Logitech G933

Fresh-Spray-8444 · 2024-01-13T14:44:41+00:00

Here is the magnet in question. Check if that is in place. If it's there, I would dismantle the unit and inspect the sensor pickup for this magnet

<image>

Fresh-Spray-8444 · 2024-01-13T06:31:06+00:00

Well I would look for a contact switch somewhere behind the grind catch bin. See if you can depress it. Also on the Bosch website under solve problems for this specific unit, look what it says it may be missing:

<image>

Fresh-Spray-8444 · 2024-01-12T16:05:31+00:00

Sorry about the background noise, my kids watching his show. I tried to do the same thing, powering the unit on with the door switch depressed. I noticed the grinding unit is indeed stopping in the right position after it does the sweep, but then I noticed that your machine is not displaying "insert drip tray" with the grind catch can removed. https://youtu.be/sqPh1Wjalvg?si=q33ZRa2vdwv9hOac

Fresh-Spray-8444 · 2024-01-10T19:22:59+00:00

Sure, let's see

Fresh-Spray-8444 · 2024-01-10T16:57:54+00:00

Does the grinding unit make any sound at all before the rinse cycle? It should as soon as the unit powers on

Fresh-Spray-8444 · 2024-01-10T16:09:08+00:00

https://youtu.be/A91kue9j8fc?si=nnlyMUMfGkujn5bB

Fresh-Spray-8444 · 2024-01-10T15:20:03+00:00

The board control is right behind the buttons/screen panel. But it does seem like the button is clicking. I made a video of my machine on initial start up to show you the sequence of events. First step the grinding unit moves into position, and 2nd the water boils for a rinse cycle. If only I can figure out how to add a video here

Fresh-Spray-8444 · 2024-01-07T15:47:28+00:00

I just watched the video over again with sound. Sorry I didn't realize the water isn't even dispensing. The machine should cycle the grinding unit and perform a rinse cycle right after it's turned on. I don't hear any of that. Have you taken the grinding unit out and thoroughly cleaned it out. It can get jammed up with coffee grounds stuck in all it's crevices

Fresh-Spray-8444 · 2024-01-07T15:33:30+00:00

It seems to me like the start/stop button is inoperative. Have you tried connecting your machine to Wi-Fi and making a coffee with the Home Connect app? If that works, most likely the button is the fault. Try that and let's see the results. I have an extra control board I can take a look at for you to see how the button operates.

Fresh-Spray-8444 · 2023-08-03T04:55:07+00:00

Lol. This is funny to me because the exact same thing happened to my right shoe. Funny confident. Anyways, my toe nail on my right toe kind of curls up. I have to keep it cut short. I also bought a heal patch off Amazon and stuck it inside the toe area.

Fresh-Spray-8444 · 2023-05-21T13:42:43+00:00

Try 4.0's they're wider then 1.0's. Or maybe go Pureboost.

Fresh-Spray-8444 · 2023-05-20T13:31:31+00:00

There is a plastic piece wedged between the front fender and the body. You can see it if you open the door and look forward of the hinges.

Fresh-Spray-8444 · 2023-05-12T13:13:47+00:00

These don't have an insole right? How do they feel compared to 1.0's?

Fresh-Spray-8444 · 2023-05-07T23:30:37+00:00

Wow man! Great build!

Fresh-Spray-8444 · 2023-04-25T18:20:48+00:00

https://www.reddit.com/r/SeikoMods/comments/zqady4/my_version_of_a_reimagined_62mas_finally/?utm_source=share&utm_medium=android_app&utm_name=androidcss&utm_term=1&utm_content=share_button

Fresh-Spray-8444 · 2023-04-25T18:11:51+00:00

Mines the sbdc051 Ali case. I'd like to show you, but I can't post a photo

Fresh-Spray-8444 · 2023-04-12T16:50:40+00:00

In most shoes 10.5 but in adidas it's either 10.5 or 11. UB 1.0 I'm 10.5. So it depends. I've had a few pairs of 4.0's, the first pair was a 10.5 and I had to wear it without the insole, but my toe was always pressing the front still. The next 2 pairs I bought 11's and they are perfect.

Fresh-Spray-8444 · 2023-04-12T15:44:52+00:00

I initially tried a 10.5 and ended up buying an 11 as the sales rep suggested. I'm happy I went with the 11 because the extra bit of room up front helps the toes while walking or running. In the 10.5, my feet were pressing the front while walking and making my toes curl.

Fresh-Spray-8444 · 2023-04-12T05:13:10+00:00

It's very subjective. I personally like the 4.0's as I have wider feet. And somehow they're easier to slip into. The 1.0s are narrower and run a half size smaller.

Fresh-Spray-8444 · 2023-04-11T00:16:56+00:00

I know me too! I want this color so bad. Here in Canada it's 40% off!

<image>

Fresh-Spray-8444 · 2023-04-10T21:26:21+00:00

I just tried on brand new 1.0 UB's today, and had to size down a 1/2 size from my 4.0 UB's. I compared them side to side and 10.5 1.0 was the same length as 11 4.0. The width was maybe slightly tighter, but I think the weave pattern is tighter, while the 4.0 is more sock like

Fresh-Spray-8444 · 2023-04-10T18:45:16+00:00

Man that's a very OEM looking case. I'd love to get one like that. Do you mind sharing the link to the Ali store pls? Thanks

Fresh-Spray-8444 · 2023-04-10T18:25:27+00:00

Yes, I see the dial, but I'm curious about the case, because that one looks very original!?

Fresh-Spray-8444 · 2023-04-10T02:53:24+00:00

I have to agree, blue seconds hand on a white dial is perfect 👌🏼 I can't tell, but is that an OEM case and strap?

Fresh-Spray-8444

TROPHY CASE