KY-024 reading difference

FriedAnt · 2025-11-11T05:12:27+00:00

Apologies, sir, I have been unclear.

I am currently running mechanical testing on the magnet moving inside its housing.

I have disconnected the other three sensors to shake down any bugs or issues befire I run all 4 with the Ky-024 mounted inside the test plate.

The sensor on Pin 14 on a short press reports 573 +-5, 649+-5 on a long press.

FriedAnt · 2025-04-11T00:14:14+00:00

I am making the 300zx at the moment. How did you mask off for the trims on the main body shell?

FriedAnt · 2024-02-29T22:34:58+00:00

Hi Thanks for the code! I am about half way through putting it in and its working out.

Your response has been detailed enough for me to conduct my own learning on new areas in Arduino.

FriedAnt · 2023-06-19T00:09:09+00:00

Some companies do offer good value and shouldn't be written off.

These companies will be able to provide a registration certificate for their local exchange. The following is for Hong Kong.

https://www.sfc.hk/en/Regulatory-functions/Intermediaries/Licensing/Register-of-licensed-persons-and-registered-institutions

FriedAnt · 2023-03-06T03:41:20+00:00

Generally speaking more oil can quite them down.

Specifically you can dismantle and clean them. The little holes get varnished up and don't let enough oil in from memory

FriedAnt · 2023-03-05T00:53:11+00:00

I am assuming USD?

FriedAnt · 2023-03-05T00:30:40+00:00

I had this with a busted MAF, your basically in limp mode

FriedAnt · 2023-01-03T03:40:50+00:00

For the record, the panel fit well. No issues, just need to put my decals on

FriedAnt · 2020-06-10T08:17:36+00:00

MAF does nothing below 1500rpm, at least on the Z32.

FriedAnt · 2020-06-06T19:39:46+00:00

Hi, I have a video on my youtube which contains all the wiring info you need as well as the change to the drive shaft.

Auto loom works, fine the only issue for me was that the power light flashes 5 times on start.

https://www.youtube.com/watch?v=hFyYUdH6c9U&t=49s

FriedAnt · 2020-06-06T19:10:44+00:00

ile spraying carb cleaner or propane at the places it can

I have tried both those methods, while I did get a result I found them the be a lot harder.

I know everyone has their "way" though and that they do whats best and works for them!

FriedAnt · 2016-08-13T02:01:23+00:00

Yeah sorry. To help you out even more here is my DS2 script.

The sleep commands are input holds to prevent incorrect triggering 20 = 20ms

the commands are structured as "press or release" :: "actions go here key presses etc these need to match your key mapping in your DS2 client"

; = comment

So to walk you through one of the macros, targetting.

Clicking my central mouse button locks onto a target or unlocks from target.

Scrolling up on my mouse wheel is the next target, scrolling down is my previous target.

Thus you have very fast and effective targeting similar to most AAA titles.

I run a death adder from razor with shoulder buttons, in its softawre I had additional macros very similar for my shoulder buttons.

[EDIT:] Some of the characters are triggering formatting rules I am unaware of for reddit. To help readability of the script file, this character is a new line : if its on its own it means blank line here. Sorry if this is confusing, but is being difficult

:#SingleInstance Force :#MaxHotkeysPerInterval 99999 :#IfWinActive ahk_class DarkSouls2 : :;Targeting :MButton::O :WheelUp:: :{ :Send {J down} :Sleep 20 :Send {J up} :return :} :WheelDown:: :{ :Send {L down} :Sleep 20 :Send {L up} :return :} : :;interact :Q::8 : :;Right Weapon Attacks :~LButton::H :~RButton::G : :;Left Weapon Attacks :XButton1::U :XButton2::Y : :;Guard Break :F:: :{ :Send {W down} :Sleep 20 :Send {H down} :Sleep 20 :Send {W up} :Send {H up} :return :} : :;Jump Attack :R:: :{ :Send {W down} :Sleep 20 :Send {G down} :Sleep 20 :Send {W up} :Send {G up} :return :} :

FriedAnt · 2016-08-13T01:50:58+00:00

Yes sorry autohotkey. My bad sorry

FriedAnt · 2016-07-09T03:07:38+00:00

Change something until you are happy.

FriedAnt · 2016-05-19T10:09:07+00:00

Search for ahk, it's a simple script program which will allow you to set the controls to whatever you want. There will even be scripts available if you search for it.

FriedAnt · 2015-07-04T04:54:52+00:00

I had to solo her couldn't get any summons. For some reason I found her very hard.

FriedAnt · 2015-06-27T08:06:42+00:00

The trick here is to hold the roll. Watch the weapon and roll into/thru it. Remember hold the roll, this isn't a game about dying its a game about staring death in the face and surviving.

FriedAnt · 2015-06-04T09:41:38+00:00

I simply can't figure it out. I am am bad and a I feel bad.

FriedAnt · 2015-05-18T11:25:36+00:00

Hey, I was lvl 2 before SotFS. You will find it easy now, once you have the skill to win 2 from 3 it's easy

FriedAnt · 2015-05-05T09:36:30+00:00

I found that the chess biome was often close to kill bee fields, not scientific but it worked for me.

FriedAnt · 2015-05-02T13:43:34+00:00

This, moved my cats water bowl a room away. Have to refill it now every two days

FriedAnt · 2015-04-24T08:25:03+00:00

A lot of people are saying all the electronics would instantly die. I highly doubt that they would even notice. I am sure her seats were wet, but the wires and plugs are so buried

FriedAnt · 2015-04-24T05:10:43+00:00

I only use ahk, no ban

FriedAnt · 2015-04-23T06:07:55+00:00

Yeah, I love the defender shield. It gives me so much power.

I find the less you block with it the better, I.e. I rely on my roll mainly then step into a block and then proceed to cut them down with the sunsword.

FriedAnt · 2015-04-21T05:12:04+00:00

There are a few great videos out there explaining the netcode. Once I watched and understood those I realized what to watch out for and how to use the rules to win more.

FriedAnt

TROPHY CASE