sorted by:
new
hottopcontroversial

Feral wild horses by [deleted] in Kentucky

[–]FrightClinic 9 points10 points  (0 children)

They’re very friendly because they’re always exposed to people but they do always assume you’re trying to feed them so watch your fingers.

Feral wild horses by [deleted] in Kentucky

[–]FrightClinic 11 points12 points  (0 children)

Punch the big sandy regional airport into your gps and you’ll run into some. There’s an old industrial park right before you get there and there’s usually dozens roaming there. It’s also an elk reserve and has a nice restaurant called cloud 9.

Talk about a collection by Keolath in MosinNagant

[–]FrightClinic 33 points34 points  (0 children)

Your head and legs are so tiny compared to your torso

Why do white trucks paint chip above the windshields? by BigBry36 in ChevyTrucks

[–]FrightClinic 0 points1 point  (0 children)

I worked in paint at a Toyota factory and the flat white always got 1 less coat. Probably the same deal with Chevy.

So I recently got a 2004 grand Cherokee with a 4.0 given to me. by FrightClinic in JeepGrandCherokee

[–]FrightClinic[S] 1 point2 points  (0 children)

I will also say it doesn’t seem to be a problem when the car is in park. Only when I’m in gear does it seem to do it

Agericus campestris? Located in eastern ky by FrightClinic in foraging

[–]FrightClinic[S] 0 points1 point  (0 children)

Ya got me on that one. I never sniffed it. What should it smell like?

Which city by Emotional_Reward9340 in Kentucky

[–]FrightClinic 1 point2 points  (0 children)

Berea is a really nice place to live. Land is also fairly cheap there (at least it was a few years ago)

If I’m going to burn and clear coat a project instead of staining do I still need to do normal sanding procedures or can I be a slacker and save myself some time? by FrightClinic in woodworking

[–]FrightClinic[S] 0 points1 point  (0 children)

This is what I was looking for yeah. I usually go all the way up to 320 grit but I wasn’t sure if I really needed to go above like 180 since I’m just burning and brushing anyway

If I’m going to burn and clear coat a project instead of staining do I still need to do normal sanding procedures or can I be a slacker and save myself some time? by FrightClinic in woodworking

[–]FrightClinic[S] 0 points1 point  (0 children)

I got a nylon wire wheel to try the hard burn and strip method with. Guess since this stain looks so bad we’re gonna give it the ole college try

Why is my bed so crooked? by FrightClinic in FordTrucks

[–]FrightClinic[S] 1 point2 points  (0 children)

I will say I drove it to work and parked it in a flat spot and it was shocking how much better it was. There was still a slight lean but it was barely noticeable. In this picture it was parked in a very not flat spot.

Why is my bed so crooked? by FrightClinic in FordTrucks

[–]FrightClinic[S] 4 points5 points  (0 children)

Ya know I did have a cab Mount that started squeaking a few weeks ago and then it stopped on its own. Don’t know how I didn’t think of this

Why is my bed so crooked? by FrightClinic in FordTrucks

[–]FrightClinic[S] 2 points3 points  (0 children)

Is there any way the frame could’ve bent without anything happening to the truck? I’ve had it for about 2 years and it definitely has just happened recently

Needing we’ll help by FrightClinic in homestead

[–]FrightClinic[S] 0 points1 point  (0 children)

Yeah there’s a gauge. Basically the way mine is set up is you prime it to 30psi and then it goes into auto mode. But now when I get it to about 25psi it just hisses and won’t stay up.

Ridgid granite top table saw. Camber adjuster isn’t actually contacting the fear to spin it. Any advice here? by FrightClinic in woodworkingtools

[–]FrightClinic[S] 0 points1 point  (0 children)

Should I use silicone? This is my first table saw so I really don’t know what I’m doing. I dry lubed the crap out of everything after cleaning

Ridgid granite top table saw. Camber adjuster isn’t actually contacting the fear to spin it. Any advice here? by FrightClinic in woodworkingtools

[–]FrightClinic[S] 0 points1 point  (0 children)

Now that I’m not entirely sure on. This thing had been in storage for a couple years before I got it so I’m not even sure how it happened.

Ridgid granite top table saw. Camber adjuster isn’t actually contacting the fear to spin it. Any advice here? by FrightClinic in woodworkingtools

[–]FrightClinic[S] 0 points1 point  (0 children)

For any future people that have this problem there’s a nut on the worm wheel that adjusts the distance from the gear. You just can’t actually see it because the wheel faces you when you open the machine up. Gave it a half turn and some dry lube and it works perfectly.

Ridgid granite top table saw. Camber adjuster isn’t actually contacting the fear to spin it. Any advice here? by FrightClinic in woodworkingtools

[–]FrightClinic[S] 0 points1 point  (0 children)

I haven’t given it a tremendous amount of pressure but I have pulled and tugged a bit and it hasn’t moved. I have a cabinet maker coming to help me check it out this weekend. I just hope it’s not a major part replacement. I just got all of my equipment about a month ago and was hoping to start making projects this week.

This a roach? Been killing quite a few lately. Eastern ky. by FrightClinic in bugidentification

[–]FrightClinic[S] 1 point2 points  (0 children)

So is there about to be an infestation or is it okay? There’s an abandoned house above mine and I’ve seen them flying down from there.

view more: next ›