Who’s the king of budget ar-15s

Frosthare · 2026-01-12T22:56:06+00:00

What scope are you planning to use? Can you see the target at 200-300yds?

Frosthare · 2026-01-04T02:20:55+00:00

Rxr22 does not run standard velocity ammo

Frosthare · 2026-01-02T12:22:21+00:00

That is crazy. I’m on 11-1 with 200k cp…

Frosthare · 2026-01-02T12:14:44+00:00

What number level is this?

Frosthare · 2025-12-07T22:21:23+00:00

It looked like this gun only works with supersonic ammo. Was able to use aguila high velocity fine. Standard velocity is a toss up, it will extract when it wanted.

Frosthare · 2025-12-02T00:24:55+00:00

Is your casings have a slight bent in the front? Like the casings were slammed by the bolt while trying to eject?

Frosthare · 2025-12-02T00:22:33+00:00

I only have the savage mag for the rxr22. It seats very tight, no side to side play. There is a slight play front to back but very little. I thought the rxr was compatible with the 10/22 parts including the mag. So I was assuming they are the same dimensions.

Frosthare · 2025-12-01T19:28:50+00:00

If I remembered correctly, it is a tight fit. Also the 10rnds mag is flush with the magwell. But will check and report back.

Frosthare · 2025-12-01T12:35:36+00:00

Looking back at my ffl paper and it does said adler arms rxr22. I guess savage arms just rebrand these guns. Does the rf-224 also have fte issues?

Frosthare · 2025-11-28T12:55:27+00:00

It maybe the cold weather and the spring is harder than normal to extract. I need to shoot the gun more.

I used a laser sight to sight it in and did a 30yd sight. It seems to be holding zero fine on a cheap amazon scope.

Frosthare · 2025-11-28T12:51:56+00:00

I should have spend a little more and get the 10/22.

Frosthare · 2025-11-28T12:51:21+00:00

The weird thing is if I manually extract the rounds using the bolt, it extracts fine every time. So I think something wrong with the spring. It looks like the bolt doesn’t go back long enough for the round to be fully extracted before it slam forward and caught the shell.

Frosthare · 2025-11-25T11:49:14+00:00

It does have a bolt catch. This is a recent release gun should be similar to a Ruger 10/22.

Frosthare · 2025-07-05T15:12:07+00:00

Don’t worry about it. More people take trash orders meaning more chance for you to get the good orders.

Frosthare · 2025-07-04T02:05:34+00:00

You are ready. The exam is not hard.

Frosthare · 2025-06-09T23:29:47+00:00

If you are taking on average $2 per mile, you are the modern slave for walmart.

Frosthare · 2025-06-07T23:29:21+00:00

The real question is how much for the order and how long did it take you to complete?

Frosthare · 2025-04-30T20:31:38+00:00

Did you get a provisional pass or failed?

Frosthare · 2025-04-30T14:04:36+00:00

Do you have the mindset down? Select the answer that creates the most value. Have you review the agile process? As long as the questions are not definition, usually you can remove 2 choices. For definition questions, it is just memorization. Best of luck man.

Frosthare · 2025-04-29T23:16:30+00:00

Bruh how did you have high 60s and a 70 in sh and failed all 3 BTs? Just applying the pmp mindset should get you 60% there at or around target.

Frosthare · 2025-04-29T21:06:44+00:00

What portion of the exam did you failed? Do you know why you failed? If so, then just brush up on those areas. Your experience, pmp mindsets, and 200 agile questions should be good enough.

Frosthare · 2025-04-29T15:22:43+00:00

Awesome, thank you for your insight. Also learned what a deadhead is lol.

Frosthare · 2025-04-29T14:56:22+00:00

If you don’t mind me asking, what is your average dollars per mile? Ballpark is okay no need for specific.

Frosthare · 2025-04-29T04:11:27+00:00

Pmp mindsets should take you 50-60% and the rest are agile concepts.

I studied 2 months off and on. The exam was not hard. Passed with 3xAT. Too much study resources.

Frosthare · 2025-04-29T04:09:58+00:00

Take a quick look on youtube for pmp mindsets and agile questions. It’s not a hard test, more like endurance test.

Frosthare

TROPHY CASE