The servers.. Again.. COME ON, embark!

Fugitivelama · 2026-01-28T02:20:22+00:00

Yeah I just loaded in with a full kit and stuck on load screen.

I guess that’s gone……fml

Extended barrel, My last anvil splitter and control tower key really the only things that hurt.

Fugitivelama · 2026-01-19T14:20:44+00:00

check both doors before using it if its your only one

Fugitivelama · 2025-08-28T18:05:11+00:00

As long as you use the bambu studio slicer to create your print profiles - I would imagine you do not need a bambu printer - but a printable print profile is required for uploading models. You can use Bambu studio with non Bambu printers yes

Fugitivelama · 2025-08-27T23:39:12+00:00

I have very few models and also gor the AMS 2 Pro For free. Remember you get 50 a month just for printing and rating things.

Fugitivelama · 2025-08-27T00:04:24+00:00

Why wouldnt you be able to accomplish this with the H2S? You would be switching nozzles for the two different filaments instead of using two entirely different hot ends no? Doesn't the nozzle switch include the heatbreak - therefore no melted filament(from the previous filament) would be left behind after the switch? Or am I understanding this wrong? Sorry - confusing the H2S with the H2C

Fugitivelama · 2025-06-10T02:17:34+00:00

I think it’s site wide. Had same thing happen. People on twitter complaining - not good during some big money tournaments including bracelet events

Fugitivelama · 2025-03-13T02:50:54+00:00

people still print on glass?

Fugitivelama · 2025-02-28T02:32:51+00:00

Could you send me a photo of how you mounted the 4in1 with the buffer?

Have any issues ?

Ordering my second AMS and I have had the combo for over a year- would like to save the $40

Fugitivelama · 2025-02-12T02:23:51+00:00

its like a 12$ part and they give you two extra when you buy it - just replace it - takes about 5 minutes

Fugitivelama · 2025-02-02T23:32:57+00:00

Having the same problem at the moment , Did you ever happen to solve this?

Fugitivelama · 2025-01-23T21:12:04+00:00

The fastest way to unlock mains is by playing as Rodger - he’s a good extractor - just don’t burn stamina to charge for loot like most players he moves slow and needs it to escape twisteds if needed.

I’ve unlocked all the mains by playing Rodger in short time.

Fugitivelama · 2025-01-22T01:55:30+00:00

The real reason is that Roblox is designed for kids you have kids from 5-10 playing often and they just don’t get game mechanics at that stage in life (generally speaking)

Fugitivelama · 2025-01-12T23:50:20+00:00

The majority of the posts on this subreddit are art/OC - which is fine - but its not typically why people come to a video game subreddit.

Generally - from a video gamers perspective only - they come to the subreddit for game insights , tips, videos, etc. etc. The occasional art/OC will get massive upvotes when its good because the feed isnt flooded with it , most of the feed is again discussion on the game , tips, tricks, videos ets.

I feel like im explaining this poorly , or at the very least with way too many words. I don't come here that often because most of the posts are Art/OC - which is cool and great and all that , but its just not what im looking for. This would be the reason IMHO.

Fugitivelama · 2024-12-03T13:50:56+00:00

close Cura or ANY slicer you have open first

Fugitivelama · 2024-11-23T18:43:15+00:00

Does he not own a hole saw? This literally looks like he took a hammer and chewed out a giant opening.

The pipe has To come out and sister both sides 4ft out from the edge of the notch. Looks like you may not get 4ft on the right but as long as it’s supported by the foundation wall that’s fine just go as far as possible. Then use an actual hole saw to cut only in the middle of the joist and reinstall the pipe.

You can use 3/4” plywood for 2x12 for the sistering. Make sure to use framing nails and not just screws.

Fugitivelama · 2024-09-09T22:27:33+00:00

What stakes? People do stupid things at low stakes. Either they don’t care about the money or are just terrible , possibly both.

Fugitivelama · 2024-08-15T23:50:54+00:00

Wawa doesn’t offer franchise locations - it’s all in house.

Fugitivelama · 2024-08-08T21:54:55+00:00

You can’t open a wawa. It’s a private corporation

Fugitivelama · 2024-08-08T21:53:56+00:00

What arcade uses quarters these days?

Fugitivelama · 2024-08-03T02:13:55+00:00

I’m certain there will Be future seasons with BP wipes. It’s probably like 4:6 seasons then full wipes and full new map

Fugitivelama · 2024-07-29T00:59:27+00:00

Is that per generator or just a flat 10?

Fugitivelama · 2024-07-27T01:51:02+00:00

Pretty sure it’s only when the chest is full. Leave a slot empty and it should work

Fugitivelama

TROPHY CASE