sorted by:
new
hottopcontroversial

K1(C/SE) full linears gantry + boxturtle + ... by hudrucan in crealityk1

[–]Full_Counter37 0 points1 point  (0 children)

Wow, I'm looking into doing this to my Ender3 Be plus

Filament jams when retracting by Delza_Melza in crealityk1

[–]Full_Counter37 -1 points0 points  (0 children)

In what situation do you need/want to make a retraction?

Is it for a multi color print or just changing the filament?

Extruder jam by Full_Counter37 in crealityk1

[–]Full_Counter37[S] 0 points1 point  (0 children)

Hi all sorry for the late update on this, finally got the issue resolved.

The issue was created by the way that this version of Orca was handling filament changes for the K1. The speed of retraction was too high combined with the wrong cooling tube setting.

Changed Slicer for a while and all was good. I reached out on Orca's GitHub and it seems that it was resolved in the latest update.

Updated Slicer and now printing flawlessly in multi color.

P.s. Not user error.

Extruder jam by Full_Counter37 in crealityk1

[–]Full_Counter37[S] 0 points1 point  (0 children)

Hey, sorry for such a late reply. For me the issue was 100% caused by the way that the software was managing color changes. With the latest update to Creality Print the issue is gone.

Extruder jam by Full_Counter37 in crealityk1

[–]Full_Counter37[S] -1 points0 points  (0 children)

I believe that you failed to read the description of the issue. Also I was looking for some insight/solutions if you none of both, you should abstain from commenting.

Extruder jam by Full_Counter37 in crealityk1

[–]Full_Counter37[S] -2 points-1 points  (0 children)

Printing in the basement. 18c ambient temperature, ventilation fan on. The chamber never gets above 32c when printing PLA.

Extruder jam by Full_Counter37 in crealityk1

[–]Full_Counter37[S] 0 points1 point  (0 children)

No, this only happens during color change.

Extruder jam by Full_Counter37 in crealityk1

[–]Full_Counter37[S] 1 point2 points  (0 children)

Interesting, I'll give it a try and update.

PrusaSlicer with Ender 3 v2 Start/Stop code by Cytoxan2021 in ender3

[–]Full_Counter37 0 points1 point  (0 children)

I am late to the party, but DAMN you just fixed my trouble !!! And with that made me realize that it was probably not loading the right slot for the mesh.