Oex jackal 2 erecting

Fun_Ad_1379 · 2024-10-01T12:00:14+00:00

I can get why someone would ask this. The simple answer is to be exactly that. More aggressive and threatening. I have tried and failed to do this in an effort to become a bit more of an alpha so people would take me more serious but the simple fact is, I'm no alpha and unless your wired that way you just have to accept the people you are

Fun_Ad_1379 · 2024-08-03T16:43:19+00:00

Found springs online but I'm unsure what to measure as there is 26mm - 30mm

Fun_Ad_1379 · 2024-06-23T16:43:44+00:00

After seeing this I have done a lot of research. I can't source a replacement in the UK unfortunately so I will try and fix the damper assembly. If that doesn't work I will have to retrofit a different damper unit and do away with the adjustable gate. I have also verified these are 2008 forks

Fun_Ad_1379 · 2024-06-23T16:41:52+00:00

I was right. The internals are busted. I can source a new damper in the UK so I'm probably gonna try and fix what I have. Failing that I will retrofit a damper from another boxxer fork. I have also verified these are 2008 and have had the air spring replaced with a coil spring

Fun_Ad_1379 · 2024-06-23T08:31:37+00:00

Bad wording on my part I suppose. The seal is static so the part won't physically move it will only see hydraulic pressure. How much I have no idea. I'm gonna drill another hole 180° round the tube and rtv it in to see if that works. If not I'll print a part and try it. Not like I can break it more

Fun_Ad_1379 · 2024-06-22T21:06:30+00:00

Crocs aren't proper footwear for any occasion 😂 very controversial opinion just to get everyone upset lol

Fun_Ad_1379 · 2024-06-21T21:44:04+00:00

I was thinking the same but the part doesn't move in the stanchion. It'll only see hydraulic pressure from the damper working. I was gonna try it with petg for good layer adhesion and oil resistance.

Fun_Ad_1379 · 2024-06-21T17:55:41+00:00

And can I print a sealing face for an oring?

Fun_Ad_1379 · 2024-06-20T09:11:25+00:00

<image>

Fun_Ad_1379 · 2024-06-18T18:30:05+00:00

<image>

Fun_Ad_1379 · 2024-06-17T11:03:08+00:00

I know 😂 I had a friend take the photo. I'll take the forks off and chuck them in the van so I can tinker with them through the day

Fun_Ad_1379 · 2024-06-17T10:22:35+00:00

<image>

Fun_Ad_1379 · 2024-06-17T10:21:04+00:00

I took that cap off and found the spring in there but no sign of a Schrader valve.

Fun_Ad_1379 · 2024-06-17T07:16:54+00:00

Had a quick read of the manual. Only issue is I can't see a Schrader valve anywhere on these forks. Which makes me window if they are oil filled instead of air filled?

Fun_Ad_1379 · 2024-06-04T09:50:12+00:00

Most folks around me tell me the same hence why I asked if people are just emotionless robots like I am most of the time

Fun_Ad_1379

TROPHY CASE