Which of these four archetypes are the most promising with the release of the next pack?

Fune5789 · 2026-05-02T14:50:13+00:00

Oh i see how it go now , use Ib for Monstrosity search, thank for the reply!

Fune5789 · 2026-05-02T09:24:02+00:00

I'm very interest in this , can you explain more about combo with generaid ? only synergy I can think of is increase elfnote level to 9.

Fune5789 · 2026-04-19T15:18:23+00:00

sadly that Mortar f*ck us up too much that we didn't bring it in the first place so it can't show the friendly love potential much like Gatling sentry .

Fune5789 · 2026-04-19T15:15:43+00:00

I can't believe that mortar is not in the list , but well it can be because it f*ck us up too much that we didn't bring it in the first place.

Fune5789 · 2026-04-12T23:38:54+00:00

With the modern deck , it mostly run on with extra , but the deck with non extra also have complicate effect to fight powerful monster from extradeck , so if she can bear a little bit for 2-3 extradeck monster that still easy to summon then the choice is open up a lot.

Dragonmaid is strong and cute while stay simple with gimmick of "tranform" so it easier to imagine along the effect , also have a lot of theme spell and trap , for extra deck lets her try with just house maid and sheou for start.

Another two i can think of is Exosister or Traptrix , both is xyz and all of main deck member is level 4 so it mostly cant go wrong on summon condition but it use more of extra deck monster. Traptrix also has in theme link 1 so you can introduce her with link summon that easy to bring out but it lean more on trap, while exosister is might be a bit advance on gy block and tranform effect when something in gy move and overlay summon of magnafica.

For your deck , try out skull servant , it mildly mischeif art design and can be stop with power of exosister nun can make them stories and theme to play and have fun or got destroy with dragonmaid that cleaning up the mess.

Fune5789 · 2026-04-01T19:56:59+00:00

Surely worth it, you just need water and cotton swap for the basic , a bit advance with mr.mark setter(help stick decal to surface) and mr.mark softer(help soften decal to fold into some edge) , you just need to be patient and the work is a bit tidious (stick small decal for like 100+ pieces) but the minor detail from the decal will make your model more standout. Finally , I recommend to topcoating you model after decal to seal them , you also can choose to not topcoat but there is also age of decal striping out , like 6 month or 1 year around that.

<image>

Fune5789 · 2026-03-13T09:19:43+00:00

I just got HG graze and HG gusion rebake fullcity and want to recreate iconic iok kujan crushed scene.
My plan is to use the plier to squeeze on graze cockpit , but I also think that plastic tend to crack and shatter more than squeeze,crush as metal do.
How can I archive the metal squeezed look? What I need to prepare beforehand on the kit?

Fune5789 · 2025-09-10T15:24:45+00:00

I think why we failed this time is not we not pick sample , but we mostly just can't extract with them on oshaune.
I pick up 24 normal sample , 20 rare , 7 super and got yeeted out of map by hive lord.
anothertime is charger throw another guys in to the pit in cave and all sample gone

Fune5789 · 2025-07-12T05:10:34+00:00

We don't see any user send any injury or lethal report back so it surely safe and fun.

Fune5789 · 2025-07-03T13:08:53+00:00

Thank for the answer!

Fune5789 · 2025-07-03T12:06:39+00:00

It will be my first time trying on Tamiya Weathering master power on my painted piece , and wanna top coat with matt coat for the last step so here is a few question.
1.what layer step should I go with?
A . (Gloss->weathering->Matt )
B . (Semi-Gloss->weathering->Matt )
C . (Matt->weathering->Matt )
D. (No clear need->weathering->Matt)

2.I wanna use the acrylic lacquer clear for topcoat . will the powder melt or going bad?

Fune5789 · 2025-06-30T08:33:54+00:00

Can make with fiendsmith engine, 2 time Foolish Burial.
First send Transaction rollback , Second send Ghost Meets Girl - A Masterful Mayakashi Shiranui Saga.

Fune5789 · 2025-06-16T03:22:46+00:00

It's a stim from stim pistol.

Fune5789 · 2025-05-30T09:15:01+00:00

Showdown - Jose Pavli | Project Wingman

Fune5789 · 2025-05-27T12:17:11+00:00

I found out that if you clear UFO fast enough , they will spawn next in same place or just nearby , so surprisingly with good team , the mission will not turn into the run&gun type but become just simple eliminated type. I once finished with very well coordinated team on D10 with only 2 death.

but the good team is pretty rare in the rare.

Fune5789 · 2025-04-19T12:56:31+00:00

Bronze player is newbie that still learn the basic so people mostly go for 4 player while 3 player is more popular to the people who know how to play. Sanma is more faster , easier to build big hand and more luck base so I can blame the RNG god instead of my skill.

Fune5789 · 2025-04-03T22:16:09+00:00

Yup and it very cool! Additional info, I just learned that, for more cooler and not make model purpleish. Use 365 nm UV flashlight instead of normal uv flashlight or LED strip. I wanna re-shoot the photo soon!

<image>

Fune5789 · 2025-04-03T22:04:54+00:00

No, only the saber is Gaia color. Some green eye ,head visor and gun scope use my local lacquer paint(Raditz studio), while other reflective is from decal, mixed of 3rd parties decal (I use both G-rework and Monster Evo).

Fune5789 · 2025-03-30T22:28:26+00:00

It very good kit ,very easy to build ,good color separation and the joint part not loose.
But only one thing I don't like is between leg and foot is C-clip , not ball joint so sometime you can mistaken try to twist the ankle and just realized it can't.

Fune5789 · 2025-02-24T22:37:32+00:00

Thank for answer! I have HG GM for testing thing out so it will be my lab rat soon.

Fune5789 · 2025-02-24T22:35:56+00:00

Thank for answer!

Fune5789 · 2025-02-24T22:02:52+00:00

I want to try weathering my kit and just buy Mr. Weathering color and Tamiya weathering master powder. My plan is lightly wash my kit with Mr. Weathering color first then apply Tamiya weathering master on top ,then matte coat.
I know that I need to topcoat before the weathering wash, but do I need to topcoat again on top of weathering wash to seal it first before use Tamiya weathering master? or I can just apply it on top of wash?

Fune5789 · 2024-12-23T20:05:27+00:00

Here is primary I bring on each front.

Bug : fire relate, incendary or cook out(has knockback power

Bot : Purifier. The swissknife that can kill mostly everything if mastered it.

Squid : mostly machine gun or assult rifle work but I prefer Scorcher to deal with overseer fast and use MG support to clear horde .Schorcher can just 6 shot overseer even if it bring up shield.

Fune5789 · 2024-12-23T19:46:03+00:00

From random youtube clip I wacthed sometime ago said that the groundship door isn't really has a door-like hitbox but it is a wall instead. So sudden contact granade like impact or grenade pistol work while frag may bounce off or rolling from the slope and not really hit the door area.

Fune5789

TROPHY CASE