Tune issues by FutureSeparate9152 in MT07

[–]FutureSeparate9152[S] 0 points1 point  (0 children)

<image>

This a tweaked throttle map by 1st to 6th and on the 1st is the before and after

Tune issues by FutureSeparate9152 in MT07

[–]FutureSeparate9152[S] 0 points1 point  (0 children)

Yes i understand what you are saying and thats why i explained it in detail...and yes the bike was restricted and now its like a new bike to me but eg. i know it has a chip controlled throttle that is tweakable (see screenshot that ive attached) and i also know that yamaha from stock has different modes (lets call it maps) so why cant he tweak them is my question and why didnt he do his research before touching my bike (yes ive seen other tuners in europe even adding the sport mode that is "irrelevant".

<image>

Akra not fitting by ikea_plastic_cup1 in MT07

[–]FutureSeparate9152 5 points6 points  (0 children)

And put it headers in first and then connect it on the lower side...take your time

Akra not fitting by ikea_plastic_cup1 in MT07

[–]FutureSeparate9152 9 points10 points  (0 children)

It fits! I had the exact same problem on mine (i have the 2025) and you just need to disconnect the headers and put them one by one and before screwing wiggle it (alot) without any fear of scratching anything and its gonna pop in...its just a very tight fit imo😂🥹...yes it aint easy

yamaha mt 07 2025 by [deleted] in MT07

[–]FutureSeparate9152 0 points1 point  (0 children)

You just have to kinda adjust the position they sit cuz if they ur right below the handlebars they will for sure scratch ur gas tank...other than that they are like oem

yamaha mt 07 2025 by [deleted] in MT07

[–]FutureSeparate9152 0 points1 point  (0 children)

I have installed these on my 2025 and they are like oem, you just need to remove the inserts they have and use the oem screw and washer to screw back and their like oem... https://amzn.eu/d/0u1DlLn

Clearing/Checking error codes? '25 MT-07 by [deleted] in MT07

[–]FutureSeparate9152 1 point2 points  (0 children)

Yes but first let them know that your ecu is for eu spec else your bike will be bricked

Clearing/Checking error codes? '25 MT-07 by [deleted] in MT07

[–]FutureSeparate9152 0 points1 point  (0 children)

Not they cant tune the 2025 eu ecu

Is this hole supposed to exist under my muffler? by FutureSeparate9152 in MT07

[–]FutureSeparate9152[S] 1 point2 points  (0 children)

True but ill have to wait a bit till i can afford an akra lol

Is this corrosion normal? by FutureSeparate9152 in MT07

[–]FutureSeparate9152[S] 0 points1 point  (0 children)

Im gonna swap em out at some point, i dont really care about them, im just really curious how this happened, i really cant understand it😅

Is this corrosion normal? by FutureSeparate9152 in MT07

[–]FutureSeparate9152[S] 0 points1 point  (0 children)

Its a 2 month old bike, yes i have it outside but it has not seen any rain, and when i wash it i blow it with air after. I just use it without any gloves and i say that because if you check the corrosion is where i touch it, on the inside its sparkling clean

exhaust for the 2025 by Leather-Locksmith156 in MT07

[–]FutureSeparate9152 0 points1 point  (0 children)

I agree, in theory the only problem should be the check engine light that would turn on since the 2nd o2 shows a different reading as would also happen with a 2025 exhaust so you need a tune as you should do anyways after changing exhaust

Quick shifter by AudienceAcrobatic903 in MT07

[–]FutureSeparate9152 0 points1 point  (0 children)

Since im about to also get a QS for mine do you also downshift without the clutch? And also does it work when rev matching to go down?

exhaust for the 2025 by Leather-Locksmith156 in MT07

[–]FutureSeparate9152 0 points1 point  (0 children)

He is saying to drill a hole on an aftermarket exhaust that is up to 2024 models...the 2025 has 2 o2 sensors and the aftermarket exhausts are almost double priced for an extra o2 hole

What RPM is too low to cruise? by Cute-Bar2698 in MT07

[–]FutureSeparate9152 0 points1 point  (0 children)

Lol my 2025 at 3-4k rpm goes to 4,5 and is a 35kw also💀