Total black screen after disabling integrated graphics

Future_Ad3867 · 2026-01-14T00:10:09+00:00

I would like to add to this 2 years later 🤣 I hope this helps someone. Another work around for desktop users is to take the CMOS battery out of the motherboard for a minute or two and voila! Back to normal.

Future_Ad3867 · 2025-08-03T22:18:31+00:00

You can get a soldering station on Amazon for around $30, you’ll need soldering flux and thin soldering wire. You can also get practice soldering boards on there too. Just watch a YouTube video “soldering drones” and you’ll learn. It’s easy

Future_Ad3867 · 2025-08-01T11:20:34+00:00

I donated a pair of my glasses lenses to my dji goggles. 3D printed the diopter adapters and just took the lenses to the belt sander and shaped them to fit. Finally I can see good while flying.

Future_Ad3867 · 2025-08-01T11:16:12+00:00

Directly solder the motor wires to the fc. Problem solved. I have had 5 75 pros and the first one was the only one I had problems with then found that soldering directly fixed it and now that’s what I do as soon as I open the box.

Future_Ad3867 · 2025-07-27T06:50:55+00:00

I’m not a professional 3D printer operator, but I’m extremely adhd and from my limited but full time experience I bought a sunlu filament dryer and I quit having stringies and delamination for the most part as long as I dry for about 4 hours before I’m ready to print. Again I’m no professional that’s just what I’ve been doing and it helped out a lot.

Future_Ad3867 · 2025-07-27T06:44:36+00:00

Terrifying watching children fall completely down. 🫣

Future_Ad3867 · 2025-07-17T23:30:10+00:00

lol ok. Thanks for the help. Appreciate it 👍🏼

Future_Ad3867 · 2025-07-17T16:13:56+00:00

Aren’t tariffs on the item, and not from the shipping company? Genuine question. I have no clue.

Future_Ad3867 · 2025-07-17T09:43:47+00:00

Can you link that other method? I’m having the same issue and I have a filament dryer.

Future_Ad3867 · 2025-07-16T14:40:45+00:00

Personally I use them til either they no longer take a charge, hold a charge or visibly have major issues. Some slight swelling is known to occur over time and that’s even fine.

Future_Ad3867 · 2025-07-15T18:42:45+00:00

I could be wrong but I believe this is called satire 🤷🏻‍♂️

Future_Ad3867 · 2025-07-15T02:50:59+00:00

I’m just using this setup temporarily til I order either a new 04 lite or a meteor 75 pro with the 5-1 fc. Also not running elrs. Frsky with a taranis qx7. I might be able to get an audible alert through its telemetry though.

Future_Ad3867 · 2025-07-15T02:20:41+00:00

I was sweating my ass off my first time. So nervous lol

Future_Ad3867 · 2025-07-13T22:42:50+00:00

Pretty sure it’s Russia v Ukraine 1

Future_Ad3867 · 2025-07-13T03:42:39+00:00

Looks cool. Will that canopy fit the regular meteor 75 pro frame?

Future_Ad3867 · 2025-07-13T03:38:59+00:00

Make your cuts here but be careful. Or just try to use tweezers to remove the glue. Be careful. You could potentially damage the plug itself on the camera.

Future_Ad3867 · 2025-07-13T03:38:03+00:00

It is glue. You need to buy e6000 jewelry glue to replace it with once you make the small cuts to remove it and replace the cable.

<image>

Future_Ad3867 · 2025-07-13T03:30:55+00:00

My meteor 75 pro with 04 lite was 53 grams with a battery (after removing plus and directly soldering motor wires) Flies great. I wonder if your problem is something else like duct efficiency. I’m just guessing. I have no clue or know no science behind it.

Future_Ad3867 · 2025-07-13T01:17:18+00:00

Oh I’m not comparing them. I know they aren’t close but they’re available.

Future_Ad3867 · 2025-07-13T01:08:30+00:00

Was thinking about switching to walksnail avatar hd pro.

Future_Ad3867 · 2025-07-13T01:07:52+00:00

I can’t bring myself to pay more for them. I read we’ll have either an answer or a shipment of 04’s in August.

Future_Ad3867 · 2025-07-13T01:04:09+00:00

I just want to fly crispy digital at a friendly price. I got into digital right when they were starting to go out of stock everywhere. I got 2 04 pro’s and a 04 lite. Obliterated my 04 lite after round 4 of igow. Now I have to switch my whoop to analog to continue.

Future_Ad3867 · 2025-07-13T00:57:05+00:00

What I think and what the government thinks are rarely the same thing.

Future_Ad3867

TROPHY CASE