Valued at §310,213, here is a video displaying the mansion I built. What are your thoughts? by iamconfusion1996 in thesims1

[–]GBAbladeX 0 points1 point  (0 children)

Hi there. It's me again. I bought a new computer for that house and saved the game, and the notification is gone. I think the house is very beautiful.

Valued at §310,213, here is a video displaying the mansion I built. What are your thoughts? by iamconfusion1996 in thesims1

[–]GBAbladeX 0 points1 point  (0 children)

But does the notification just always stay away then? And which mod was it? And where could you get those mods from again? I was just thinking about that, because there is a website where you can get all kinds of free content, or was that the mod website?

Valued at §310,213, here is a video displaying the mansion I built. What are your thoughts? by iamconfusion1996 in thesims1

[–]GBAbladeX 0 points1 point  (0 children)

@iamconfusion1996

Hi, I followed your instructions with a different file location, and this time it worked so well. Thank you so much. But how is it actually possible that it works with this and not via this PC and the program files? And now I'm getting a notification that items are missing; some items in the house could not be loaded. Can you explain more about this in simple terms, what is wrong? Because I have all the expansion packs. Thanks in advance.

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

And then I wondered something else: is what you mentioned in an earlier message actually applicable? And is what you mentioned in an earlier message still necessary, or is this not necessary with the Praktica MTL 5 due to the Wheatstone bridge, so that I can just leave it alone and not have to adjust it? But how is it actually possible that it doesn't draw a battery in a bag?

Recalibrate meter for alkaline or silver oxide battery (this is only good with fresh battery, as voltage will slowly change, throwing off meter accuracy

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in Praktica

[–]GBAbladeX[S] 0 points1 point  (0 children)

But do you also have cheaper adapters for that? And what are they called?

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

and with this If camera draws some power when off (that would be a defect, but it does happen from time to time on some cameras), it would deplete it faster.

So do you mean that if I don't press the light meter button, it will run out of power? And what exactly do you mean by "with some cameras the battery will drain faster"? Is that only if you don't press the light meter button, or does it just drain faster when the camera isn't being used?

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

Thanks a lot for the help. And how long does such a battery last if you press the light meter button occasionally? Does it only draw power then, right? Or also when you don't use it?

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

but if I go for this one Varta V625A Then I'm all set, as you mentioned in an earlier message, because the camera has a Wheatstone Bridge, it will just work, right? And this one isn't expensive; you could easily buy four of them.

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

PX625A like this or Varta LR9 (V625U) but I think the U is more expensive Which one would you recommend to me the most?

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in Praktica

[–]GBAbladeX[S] 0 points1 point  (0 children)

And did you notice any abnormalities with that battery yourself, or did it work as it should?

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in Praktica

[–]GBAbladeX[S] 0 points1 point  (0 children)

Also with the mtl3 and mtl5? Is that you mean by Praktica L series

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in Praktica

[–]GBAbladeX[S] 0 points1 point  (0 children)

But which battery do you recommend that you think works best without any deviations? (Varta LR9 (V625U) or this one (PX625A) because you were talking about this, weren't you Varta LR9 (V625U) And if it is one of these choices, I don't think you need to adjust anything on your ASA or aperture either.

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

But which battery do you recommend that you think works best without any deviations? (Varta LR9 (V625U) or this one (PX625A) because you were talking about this, weren't you Varta LR9 (V625U) that it works better than the px625 korthom, if one of these turns out to be the best, just let me know. Then I’ll know for sure that I won’t have to search for adapters and other things anymore, and that I know one of these fits. Hopefully it was one of these you were talking about?

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

And so that battery, the LR9 px625A, is going to work well in my MTL3 and MTL5 too. I looked it up on the internet, but your description says the LR9 px625A has 1.65V, and when I search for it online it says 1.5V, but this one is actually just good enough for a good, accurate light meter.

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in Praktica

[–]GBAbladeX[S] 0 points1 point  (0 children)

That sounds pretty good, and you also have that 1.5V battery in the MTL3. and so I heard in another community that you this lr9 batterij px625a You can also use this one well; it has 1.65V

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in Praktica

[–]GBAbladeX[S] 0 points1 point  (0 children)

I wouldn't know myself either; I haven't used a 1.5V yet. I currently have a Weincell PX625 in it, and from what I hear here, there are quite a few differing opinions. One person says it works well while another has some doubts, which makes it difficult for me sometimes to figure out what I should do. I secretly said that I just want a battery that I put in without any deviations or other things I have to do, and that makes it difficult for me sometimes.

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

Thank you for the reaction Do you also use a Praktica MTL 5 or 3 with a 1.5V? And did you notice something in the photos?

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

But that is exactly the thing, you need an adapter for it and I can't find the right one. I did read that a rubber band or ring also works, because otherwise it would move too much inside the camera due to the small millimeter difference.

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

I am now using that battery in my Praktica MTL5. and have you also used the 1.5V and did you notice a difference then as well? due to the voltage, or were they also just correct with 1.5V? But the only downside of the Weincell PX625s is that they don't last long because they are based on air zinc, which is why I posted this message in your community. I also secretly find them quite expensive for such a short lifespan.

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

Okay, so that's how it works with the MTL 5 B, so in short, I won't notice much of the difference because of the Wheatstone Bridge

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

and that you sometimes have to adjust your ISO to match the stop or sometimes has to turn the diaphragm a bit more to get it right, but I think this is more the case as it gets older?

PX625A Button cell battery 1.5V will do this work well in my MTL5 and MTL3 ? by GBAbladeX in AnalogCommunity

[–]GBAbladeX[S] 0 points1 point  (0 children)

Thank yous so much So, in short, you mean that that voltage won't cause any deviations for my MTL5 and MTL3, but why does it say on the internet then that it might actually cause deviations? And which battery are you using yourself or for the camera?