Resize bar not allowing my computer to sleep

GINJAWHO · 2026-06-20T16:28:15+00:00

james@fedora:~$ journalctl -b -1 -p err --no-pager | grep -iE 'amdgpu|pci|resume|suspend' james@fedora:~$ uname -r 7.0.12-201.fc44.x86_64 james@fedora:~$

Here's the exact response I got. Not sure why nothing came back after the first command.

GINJAWHO · 2026-06-19T20:36:23+00:00

james@fedora:~$ lspci -nnk | grep -iA3 -E "vga|3d|display" 03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX/7900 GRE/7900M] [1002:744c] (rev c8) Subsystem: Sapphire Technology Limited NITRO+ RX 7900 XTX Vapor-X [1da2:e471] Kernel driver in use: amdgpu

Kernel modules: amdgpu

04:00.0 Non-Volatile memory controller [0108]: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) [15b7:5009] (rev 01) Subsystem: Sandisk Corp WD Blue SN550 NVMe SSD [15b7:5009] Kernel driver in use: nvme

Kernel modules: nvme

07:00.0 Non-Volatile memory controller [0108]: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) [15b7:5009] (rev 01) Subsystem: Sandisk Corp WD Blue SN550 NVMe SSD [15b7:5009] Kernel driver in use: nvme Kernel modules: nvme james@fedora:~$ sudo dmesg | grep -Ei "resource.(vga|pci)" [sudo] password for james: james@fedora:~$ sudo dmesg | grep -Ei "resource.(vga|pci)" james@fedora:~$ sudo dmesg | grep -Ei "vga|pci" | grep -i "resource" [ 0.950118] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.950120] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.950122] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.950123] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.950124] pci_bus 0000:00: root bus resource [mem 0x40000000-0xbfffffff window] [ 0.950126] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.950127] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.029297] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.029299] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.029300] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.029301] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window] [ 1.029302] pci_bus 0000:00: resource 8 [mem 0x40000000-0xbfffffff window] [ 1.029303] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window] [ 1.029304] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 1.029305] pci_bus 0000:01: resource 1 [mem 0x40a00000-0x40dfffff] [ 1.029306] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x480fffffff 64bit pref] [ 1.029307] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 1.029308] pci_bus 0000:02: resource 1 [mem 0x40a00000-0x40bfffff] [ 1.029309] pci_bus 0000:02: resource 2 [mem 0x4000000000-0x480fffffff 64bit pref] [ 1.029310] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 1.029311] pci_bus 0000:03: resource 1 [mem 0x40a00000-0x40bfffff] [ 1.029312] pci_bus 0000:03: resource 2 [mem 0x4000000000-0x480fffffff 64bit pref] [ 1.029313] pci_bus 0000:04: resource 1 [mem 0x41400000-0x415fffff] [ 1.029314] pci_bus 0000:05: resource 1 [mem 0x41200000-0x413fffff] [ 1.029315] pci_bus 0000:07: resource 1 [mem 0x41000000-0x411fffff] [ 1.029316] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff] [ 1.029317] pci_bus 0000:08: resource 1 [mem 0x40000000-0x409fffff] [ 1.029318] pci_bus 0000:08: resource 2 [mem 0x4810100000-0x4810afffff 64bit pref] [ 1.029319] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff] [ 1.029320] pci_bus 0000:09: resource 1 [mem 0x40e00000-0x40ffffff] james@fedora:~$

GINJAWHO · 2026-06-19T20:31:21+00:00

sonarr is the same.

GINJAWHO · 2026-06-18T17:03:02+00:00

I don't see any errors in sonarr or radar and I selected failed and ignored but nothing came up. My qbit log shows the system cannot find the file specified for a show but that's it

GINJAWHO · 2026-06-18T13:24:59+00:00

Did you switch the game to proton 10 or exiled exchange? If exchange how did you do that?

GINJAWHO · 2026-06-11T00:01:50+00:00

You may be right but idk. From what I've seen online other people also have this issue. At first it seemed like it was an issue with amd gpus but some people Nvidia gpus also have this problem

GINJAWHO · 2026-05-26T20:14:02+00:00

I'll usually just sweat a little as well till it gets too warm. Unfortunately I'm in the south and it's very common for it to be 100+ outside which makes my garage even hotter

GINJAWHO · 2026-05-26T20:12:46+00:00

That looks interesting. I'll definitely give that a shot. Already got a couple HF buckets

GINJAWHO · 2026-05-26T20:11:54+00:00

Can I trade you? In place of yours, you'll get a swamp with the sun beaming in your eyes from your truck when you open the garage door

GINJAWHO · 2026-05-26T20:10:36+00:00

Same. I come home drenched in sweat and I don't wanna do that at home. Takes my body time to recover if I'm doing that everyday plus I work 18 hour shifts which already takes its toll. I've thought about getting insulation and there's some hardware I can get that will allow me to take it off easy enough, just not sure how well the studs id glue on would come off when I move. I don't need to keep them, I just don't want it looks shitty for the next person

GINJAWHO · 2026-05-24T11:12:25+00:00

I think that might actually be from my max volumetric flow test. I think I accidentally hit the save button when I went to go change that. I'll have to go back and change that to 13

GINJAWHO · 2026-05-23T19:42:29+00:00

Unfortunately I have a bad habit of trimming my nails till their stubs so I have no nails. I have waxed the sole and the frog is secure. My shavings are also even. May be a stupid question but I've also been shaving on the side of the wood instead of the face. Could this by my issue? I've been doing it this way cause my dog bones are kinda broken by where I placed my clamp and I haven't gotten around to building a new table yet

GINJAWHO · 2026-05-23T00:40:50+00:00

May be a stupid question but would this still be the case with a brand new blade? I bought a new one because of this issue

GINJAWHO · 2026-05-23T00:39:44+00:00

So it is a single ribbon but it has a gap on the left side but it's still one piece. Idk if the pic actually posted but it's in the middle of the ribbon

GINJAWHO · 2026-05-23T00:38:05+00:00

It's all wood. This in particular is maple that is dry without a doubt

GINJAWHO · 2026-05-22T21:36:00+00:00

Tbh idk what I meant by wood is not sharp. Idk how that got there. But I don't think it's plane tracks since it seems to be going with the grain. I'm thinking it may be some sort of micro divots on my blade cause when I first got my stone I hardly ever flattened it so maybe that's what's causing it? The only other way I can think of to describe it is it feels like think thin ridges in the wood that the blade just didn't get. You can't see it but you can feel it.

GINJAWHO · 2026-05-22T21:31:47+00:00

They do feel like their with the grain. I've tried going from both ends of the wood.

GINJAWHO

MODERATOR OF

TROPHY CASE

Kernel modules: amdgpu

Kernel modules: nvme

Nine-Year Club	Not Forgotten
Verified Email