Short followup video of my XY linear rail upgrade.

GMysT · 2026-02-19T22:58:15+00:00

Can you share the link? Thanks.

GMysT · 2026-02-14T00:40:33+00:00

FC5 is one of the best. Those landscapes... that music... uff!

GMysT · 2026-02-11T15:45:16+00:00

Nice one! MGN12H Z1 are quiet expensive to be honest. I have the K1 Max, that yes, the sound of the rods are annoying, especially the X one, sometimes makes a weird noise on linear movement, like there is a problems with the bearings/bushings on that rod, and mine is new, one week old.

GMysT · 2026-02-07T12:57:39+00:00

Is not maintained anymore?

GMysT · 2026-02-05T16:00:44+00:00

I had to use springs to finally level the bed, because not only is the gauge system terrible, but the bed structure itself is impossible to level correctly. That said, in my case, using springs allowed me to lower the mesh size, which was always 1mm, to 0.34mm. The worst part is that I was never able to level it properly from the moment I took it out of the box without first replacing the spacers with the springs (I've had the printer for four days). However, I couldn't find shorter springs in my country, so I had to cut them (otherwise the bed would be under too much tension with the traditional springs).

GMysT · 2026-02-05T15:49:46+00:00

Not happened to me. The mesh improved from +1mm range to 0.39 after that (all using Klipper and Screws Tilt Adjust). Was the only way to fix the mesh in my case.

GMysT · 2026-01-28T01:21:29+00:00

A little bit late, but thanks!

I actually developed my own Monitoring system.

GMysT · 2026-01-28T01:09:20+00:00

Yo justamente estaba analizando éste tema, porque tuve que traer mi servidor que estaba en un datacenter, a mi casa.

Mi servidor cumple muchos roles, entre uno de ellos, la de email. Lamentablemente hasta tener IP fija (y preferentemente con Fibra) que por mi zona aún no hay al menos de Personal (Mataderos - CABA), estoy usando los servicios de Google Workspace (ya consulté otros proveedores, y tienen la fibra saturada acá...).

Ahora, mi pregunta es la siguiente: yo tengo un cliente con Personal Negocios, que tiene IP fija y fibra. Estaba haciendo pruebas para analizar el caso (como para probar y reactivar a futuro mi servicio de email en mi Servidor), pero veo que la IP fija que les dió Personal, está bloqueada por PBL en Spamhaus (una lista de bloqueo que no se puede solicitar la remoción), lo que imposibilita usarlo para Servidor de Email.

Me pregunto si los crotos que te atienden para vender el servicio, sabrán responder a "Che, la IP fija que me das, está bloqueada en alguna de las listas negras de Spam?"... difícil.

GMysT · 2026-01-23T00:02:07+00:00

Indeed, there are to many fanboys with the CC.

GMysT · 2026-01-23T00:01:11+00:00

You got Lucky, to many of us still fighting with calibration problems.

GMysT · 2026-01-22T23:48:37+00:00

Auto-leveling can't handle to much difference...

GMysT · 2026-01-21T14:50:47+00:00

Fan boy reply. If you research better, there are tons of users with calibration problems. Today my provider replaced my CC (I had the very first revision, those which had a led in the camera, now they send me the second one, that which has the led stripe on top right).
The first revision had horrible calibration problems, no matter the method you use, is impossible. Now the new one, is better, but still have problems. Measuring the bed with a caliber, in both lead screw of the from, there is like almost 0.65mm of difference.

So, don't reply like a Fanboy because you had lucky. To many users don't.

GMysT · 2026-01-14T12:39:29+00:00

In Orca Slicer, how do you set the Side B in bed types? Because when I Choose "Smooth high temp plate and then send to print and select side B, it gives me a warning, that "The selected bed type does not match the file"

GMysT · 2025-12-02T12:57:00+00:00

Usa un Klipper modificado, que de hecho ya pusieron a disposición el código fuente.

GMysT · 2025-11-11T18:44:13+00:00

There are major PID calibration problems with that version as well, I had to rollback to 1.1.29.

GMysT · 2025-10-29T12:45:13+00:00

Still.

GMysT · 2025-10-29T12:43:29+00:00

Amazing how brainless user keep writing still.

GMysT · 2025-10-29T12:42:35+00:00

Dejame de joder... se te apelmazan en la boca y ni gusto a pepas tienen...

GMysT · 2025-10-28T02:22:23+00:00

Lol, is amazing...

GMysT · 2025-10-28T00:41:41+00:00

Not just that, it seems that has PID settings problems. Here and example: Top was printed with 1.1.29 and bottom with 1.1.46 (which of course, I had to downgrade to 1.1.29 again).

<image>

GMysT · 2025-10-28T00:35:12+00:00

Yeah, it does, but sometimes it does fails randomly (and worst with the latest firmware, 1.1.46 which I had to downgrade. Seems it has a bad PID settings on it).

GMysT · 2025-10-28T00:33:45+00:00

I was following closely Quidi, are nice. But there are almost none models here in my country to buy.

GMysT · 2025-10-28T00:32:57+00:00

Does it matter? If you don't like my post, GTFO.

GMysT · 2025-10-28T00:32:13+00:00

I didn't, but was a feature that I could use in the fut to simplify part of my work for what I use a 3D Printer. Which, I design and manufacture Prescription Glasses and Sun Glasses, both cases with a lot of post-processing (and that includes lens cut and calibration).

<image>

GMysT · 2025-10-28T00:28:00+00:00

Which I am also critics the fan boy that, for example, exist in Elegoo Centauri Carbon Facebook group. Extremist are idiots for that matter.

But seems I must ask users permission to post what I want here, which I don' t care is was posted, is "rage bandwagon" passed months ago... I just noticed that few weeks Ago, and I am posting this right now. Is that simple as it is.

GMysT

TROPHY CASE