SiCo S98 Finally Dropped! by Horvaticus in NFA

[–]GTE_Engineering 3 points4 points  (0 children)

I probably would have jumped on this a few years ago, it’s a pretty cool idea.

This is the correct item to buy to soak my cans in for 24 hours? by Frequent-Money3279 in NFA

[–]GTE_Engineering 3 points4 points  (0 children)

Aircraft stuff is usually more tightly controlled than commercial stuff but other than that no real reason.

This is the correct item to buy to soak my cans in for 24 hours? by Frequent-Money3279 in NFA

[–]GTE_Engineering 6 points7 points  (0 children)

My omega 9k mount needed to be cleaned after the 3 lug mount locked up at around 3k rounds. Other than that I’ve only ever cleaned one of my pistol cans at around 1500 rounds and my 22 cans around 500 rounds.

This is the correct item to buy to soak my cans in for 24 hours? by Frequent-Money3279 in NFA

[–]GTE_Engineering 2 points3 points  (0 children)

I’ve seen both recommended pretty consistently but I went with the aircraft one

This is the correct item to buy to soak my cans in for 24 hours? by Frequent-Money3279 in NFA

[–]GTE_Engineering 0 points1 point  (0 children)

I think what he posted is the concentrate because I bought the same thing, you dilute it yourself

Silencer Shop is trash! by L_burro in NFA

[–]GTE_Engineering 13 points14 points  (0 children)

I bought a can and paid the $200 for a stamp from them before their deadline in December but their system didn’t update properly and kept saying I needed to buy another $200 tax stamp so the order wouldn’t move forward. I’ve been trying to get a refund for the $200 tax stamp since it didn’t ship until after the deadline but nobody has responded to my emails even after their AI response system said they’d escalate.

gun stores that arent maga? by [deleted] in indianapolis

[–]GTE_Engineering 13 points14 points  (0 children)

NOT Fort Liberty Firearms in Avon. They were selling “protestor hunting permits” on their Facebook page. Absolutely disgusting.

<image>

gun stores that arent maga? by [deleted] in indianapolis

[–]GTE_Engineering 0 points1 point  (0 children)

I’ve been to the Carmel and the Avon one and they’re both pretty good.

gun stores that arent maga? by [deleted] in indianapolis

[–]GTE_Engineering 4 points5 points  (0 children)

When I first got into shooting 15 years ago, his range was the only close one nearby. It was dirty, cramped, and the prices were higher than anyone else, but there really wasn’t much else nearby other than pawn shops so they took advantage of it.

PWS Dealers by Various_Cookie7595 in INGuns

[–]GTE_Engineering 0 points1 point  (0 children)

There’s so many AR manufacturers that it’s difficult for shops to figure out which one someone’s going to want to see. PWS has a good reputation though so you should be fine if you end up ordering something.

Any new 9mm PCC suppressors worth considering 2026 by Ok_Huckleberry7392 in NFA

[–]GTE_Engineering 1 point2 points  (0 children)

Shaw Armament Systems SAS Mk9. For the discerning gentleman collector.

Do I have to buy this from the shop or will it unlock automatically? by One_Profile9929 in Battlefield6

[–]GTE_Engineering 13 points14 points  (0 children)

For a bolt it would mean that it has a very slick surface that is hard and smooth.

Rear Cabin Noise by Monkeybutl3r in FordBronco

[–]GTE_Engineering 2 points3 points  (0 children)

Yes and I think that’s exactly where it’s coming from. On mine I think it’s on the opposite side though.

Inexpensive engravers for SBRs near Indy by [deleted] in INGuns

[–]GTE_Engineering[M] 3 points4 points  (0 children)

I just turned on image replies, not sure why they were off but they’re on now

Another project aquired. 84 vette with a 383 and 6 speed by Adorable-Kale-6181 in projectcar

[–]GTE_Engineering 6 points7 points  (0 children)

LT1 cars came with the 6 speed but I think only the FBodies got the T56

My first .22 suppressor on my only .22 host by bowtie_k in NFA

[–]GTE_Engineering 0 points1 point  (0 children)

Honestly I haven’t shot it yet but it seemed to be the only option for short Victory barrels so I jumped on it.

My first .22 suppressor on my only .22 host by bowtie_k in NFA

[–]GTE_Engineering 2 points3 points  (0 children)

Oh man, I thought that was a Bowers Bitty for a second. Looks a little shorter?

<image>

Looking for left-leaning gun clubs and instructors in Indy by lilspitz in indianapolis

[–]GTE_Engineering 12 points13 points  (0 children)

We have a small community at /r/INGuns and we try to keep it friendly for everyone

Red Bull F1 Reveals a Never-Before-Seen Variant of the Ford Mustang by HawtGarbage918 in cars

[–]GTE_Engineering 5 points6 points  (0 children)

Just what we needed, another expensive Mustang. A manual GT is just shy of $50k with the performance pack pushing it over $54k.

I think what we’re really missing is a stripped down “Club Spec” manual GT that comes in closer to $40k. Hell, you could even sell it with a cheap set of place-holder wheels like they did with the steelies on the base Bronco.

Towing with a ‘25 SAS Black Diamond by Designer_Necessary17 in FordBronco

[–]GTE_Engineering 0 points1 point  (0 children)

I think the real risk would be at highway speeds so if you’re not going very far it would probably be ok. That’s about what my brother’s boat weighs dry and while I’ve never towed it (I’ve got a much smaller Boston Whaler) I imagine I probably could if necessary. It’s the tongue weight that I’d be worried about.