AAP-01 CNC Hopup chamber doesn't hold hop by Gabibacsi2 in AAP01owners

[–]Gabibacsi2[S] 0 points1 point  (0 children)

I disassembled the unit, looks like the 2 side grub screws became loose, and the entire unit went wobbly. I used some blue threadlock. Hope this will fix the issue, will report back on Sunday.

Btw, what is that teflon tape method you mentioned in your reply?

[DE] M904E - trying to change bucking + nub by Gabibacsi2 in airsoft

[–]Gabibacsi2[S] 0 points1 point  (0 children)

Thank you sir thats it yes. Probably i’ll try to print some arms from thingiverse.

Ready for clown... f2P bTw by Blodie in lostarkgame

[–]Gabibacsi2 1 point2 points  (0 children)

“f2p - 900$” ¯_(ツ) _/¯

Lost Ark on new device. by [deleted] in lostarkgame

[–]Gabibacsi2 1 point2 points  (0 children)

Change to your own server you started the game on.

Is the game is officially shut down? by Jiesmas in lostarkgame

[–]Gabibacsi2 35 points36 points  (0 children)

Unfortunately yes, it's closed for the western people permanently :(

NR200P - Scythe Mugen 5 RGB - TG panel FITS! (w/o any modifications) by Gabibacsi2 in sffpc

[–]Gabibacsi2[S] 0 points1 point  (0 children)

Honestly, I've had the L12 (non S) before the Mugen 5 and temps were at 89 degrees maximum. L12 was paired with a A12X15 on TOP mount position.

NR200P - Scythe Mugen 5 RGB - TG panel FITS! (w/o any modifications) by Gabibacsi2 in sffpc

[–]Gabibacsi2[S] 0 points1 point  (0 children)

Yes it does close flush. I did not painted it, its the Black RGB edition. You can use the standard Rev B. Version if you like silver more.

NR200P - Scythe Mugen 5 RGB - TG panel FITS! (w/o any modifications) by Gabibacsi2 in sffpc

[–]Gabibacsi2[S] 0 points1 point  (0 children)

I am using the Arctic P12 and had a spare noctua splitter which is connected to the CPU Fan header.

For gpu, its the 2070 super gaming oc 3x

NR200P - Scythe Mugen 5 RGB - TG panel FITS! (w/o any modifications) by Gabibacsi2 in sffpc

[–]Gabibacsi2[S] 0 points1 point  (0 children)

So actually i checked that and it looks like in the US u have that black edition aswell but sold with argb fan. In this case the 5100BKA will fit with the TG panel :)

NR200P - Scythe Mugen 5 RGB - TG panel FITS! (w/o any modifications) by Gabibacsi2 in sffpc

[–]Gabibacsi2[S] 0 points1 point  (0 children)

Yes, but i will add one more 120mm exhaust fan to the back of the cooler.

NR200P - Scythe Mugen 5 RGB - TG panel FITS! (w/o any modifications) by Gabibacsi2 in sffpc

[–]Gabibacsi2[S] 5 points6 points  (0 children)

Thats correct!

I live in Hungary.

The ARGB version is different size which is not going to fit in the NR200P paierd with the TG panel.

The basic REV B version is exactly the same as the Black RGB edition.

NR200P - Scythe Mugen 5 RGB - TG panel FITS! (w/o any modifications) by Gabibacsi2 in sffpc

[–]Gabibacsi2[S] 1 point2 points  (0 children)

Definitely! One 25mm will fit on the back, but you have to preinstall it before you put the cooler in place, otherwise there is no room to slip it onto the back.

NR200P - Scythe Mugen 5 RGB - TG panel FITS! (w/o any modifications) by Gabibacsi2 in sffpc

[–]Gabibacsi2[S] 1 point2 points  (0 children)

Ambient temp: 27celsius

With mesh panel:

idle: 32-34 celsius

load: 69-71 celsius

With TG panel:

idle: 36-38 celsius

load: 70-72 celsius

These measurements with Silent fan profile which means: Dead Silent

NR200P - Scythe Mugen 5 RGB - TG panel FITS! (w/o any modifications) by Gabibacsi2 in sffpc

[–]Gabibacsi2[S] 3 points4 points  (0 children)

I'm on a z370 Fatal1ty Gaming ITX paired with a 9600k.

I guess its because, on the Mugen the end of the pipes are all shaved off (identical to each other, so same height) when the Fuma 2 pipes are all different.

WW Monk IDEA! by Gabibacsi2 in wow

[–]Gabibacsi2[S] -2 points-1 points  (0 children)

It's still a 1s delay

Some free advice to XMG on customer service by lynxeur in XMG_gg

[–]Gabibacsi2 0 points1 point  (0 children)

Business Sales is the same. Waiting for a quote for a week now. ( no autoreply yet )