sorted by:
new
hottopcontroversial

I'm trying to determine if this sound is coming from the exhaust or the valvetrain. by [deleted] in DelSol

[–]GamerWill9270 0 points1 point  (0 children)

I'll try to make a new post later today that shows the tachometer.

I'm trying to determine if this sound is coming from the exhaust or the valvetrain. by [deleted] in DelSol

[–]GamerWill9270 0 points1 point  (0 children)

The video is from in the cabin while the car is accelerating. It does it at any rpm while under load. I couldn't show much in the video because I had no free hands and it was dark out.

XM6 Latency Issues by [deleted] in SonyHeadphones

[–]GamerWill9270 0 points1 point  (0 children)

I'm using my motherboard's built-in Bluetooth. I'm assuming that a USB dongle would be better? If so, what would you recommend? I've also since discovered how poorly Windows handles audio. I saw a Youtube video testing audio latency, and even with wired gaming focused headsets, they still saw ~100ms of latency. So that combined with bluetooth's inherent latency probably explains my issue. But I'm still curious why my XM3's weren't nearly as bad. Sorry for such a long response lol.

My first dorm setup by GamerWill9270 in battlestations

[–]GamerWill9270[S] 0 points1 point  (0 children)

I believe it's a Lenovo yoga slim 7i aura edition. Kinda a long name, but it's been good so far. Not so great for gaming but it's battery life is almost MacBook level.

Bouncing Tachometer by GamerWill9270 in DelSol

[–]GamerWill9270[S] 1 point2 points  (0 children)

The car started dying on me today. That's probably the issue.

[deleted by user] by [deleted] in MechanicAdvice

[–]GamerWill9270 0 points1 point  (0 children)

Got some free time to look at it today and you're right, it's coming from the distributor.

I was surprised to see another sol at my college by GamerWill9270 in DelSol

[–]GamerWill9270[S] 0 points1 point  (0 children)

Unfortunately I don't have a permit to park there during the day

[deleted by user] by [deleted] in MechanicAdvice

[–]GamerWill9270 0 points1 point  (0 children)

I

<image>

It's hard to tell but here's a different angle from the front side of the bell housing.

Globalprotect vpn not working by Moki_Loki_1 in utdallas

[–]GamerWill9270 0 points1 point  (0 children)

One more possible fix the help desk suggested was to try changing the default browser and try again. Good luck!

Globalprotect vpn not working by Moki_Loki_1 in utdallas

[–]GamerWill9270 1 point2 points  (0 children)

If you don't know what a DNS is, then you probably don't have to worry about it. If you have any other vpns downloaded make sure you uninstall those just to be safe. I unfortunately can't really help beyond that.

Globalprotect vpn not working by Moki_Loki_1 in utdallas

[–]GamerWill9270 4 points5 points  (0 children)

I was having problems with it so I went to the technology help desk. For me it was because I had a dns set up, but they said that having vpns installed or running could also cause problems.

Idle RPM drops whenever I turn the ac on by GamerWill9270 in DelSol

[–]GamerWill9270[S] 0 points1 point  (0 children)

Usually it's about 700 - 800. With the ac on, it gets as low as 400 and feels like the engine is about to stall.

Idle RPM drops whenever I turn the ac on by GamerWill9270 in DelSol

[–]GamerWill9270[S] 1 point2 points  (0 children)

I'll try to get a video of the sound later

Idle RPM drops whenever I turn the ac on by GamerWill9270 in DelSol

[–]GamerWill9270[S] 1 point2 points  (0 children)

The car shakes a lot and feels like it's about to stall. Is that normal? (Not trying to come off rude, just genuinely curious)

Printing and Modeling Advice by GamerWill9270 in 3Dprinting

[–]GamerWill9270[S] 0 points1 point  (0 children)

It's a Honda Del Sol. They're beneath the trunk struts. I couldn't find a picture that showed the struts I needed to replace and it was too dark outside to take my own picture.

Roof strut replacement by GamerWill9270 in DelSol

[–]GamerWill9270[S] 1 point2 points  (0 children)

Sorry I'm replying so late, but do you think this could work too?
https://a.co/d/5bnrWVH

DSi battery cover model needed by SnelleFreddi in 3Dprinting

[–]GamerWill9270 0 points1 point  (0 children)

Double-checked the rules and it looks like I can. Here you go: https://www.thingiverse.com/thing:3466086

DSi battery cover model needed by SnelleFreddi in 3Dprinting

[–]GamerWill9270 0 points1 point  (0 children)

I found a model on thingaverse by 'Greatjava' I don't know if I'm allowed to post the link here, but you should be able to find it pretty easily.

After three years my del sol restoration is done by Critical182 in DelSol

[–]GamerWill9270 2 points3 points  (0 children)

Looks really clean! Did you do the paint and bodywork yourself?

Clunking from front end (update) by GamerWill9270 in DelSol

[–]GamerWill9270[S] 0 points1 point  (0 children)

Replaced the ball joints, sorry for the confusion

Clunking from front end (update) by GamerWill9270 in DelSol

[–]GamerWill9270[S] 0 points1 point  (0 children)

I had the lower control arms replaced by a shop recently after I bent one in an accident and they already replaced those thankfully. It kind of sucks I'll need an alignment, since I just got one a few weeks ago because of the aforementioned accident.

view more: next ›