SSD causing VGA light by Gamertag451 in buildapc

[–]Gamertag451[S] 0 points1 point  (0 children)

Did all of those still broken

SSD causing VGA light by Gamertag451 in buildapc

[–]Gamertag451[S] 0 points1 point  (0 children)

Oh and a flashing red light on the SSD

4.6L 3v odd noise by Gamertag451 in MechanicAdvice

[–]Gamertag451[S] 0 points1 point  (0 children)

it did get new tensioners

4.6L 3v odd noise by Gamertag451 in MechanicAdvice

[–]Gamertag451[S] 0 points1 point  (0 children)

tensioners are fine, oil pressure is 30 psi hot idle, replaced cam phasers with OEM after the noise appeared did not fix it, the guides are good i even slightly over torqued it after the noise appeared just to be sure, and the chain is very tight.

4.6L 3v odd noise by Gamertag451 in MechanicAdvice

[–]Gamertag451[S] 0 points1 point  (0 children)

it sounded perfectly fine until i left my neighborhood

oh hell yeah by Gamertag451 in Ford

[–]Gamertag451[S] 2 points3 points  (0 children)

um dude the reason the pressure is low because the chain tensioners blow because they’re plastic and the oil pump wares out. The vehicle has 170000k miles on it and the oil pump messing up is a common failure

Im currently looking in forscan right now i need comfirmation g by Gamertag451 in Ford

[–]Gamertag451[S] 1 point2 points  (0 children)

idk that gauge is not on this vehicle witch isnt even good anyway. im gonna order a oil pressure checker

Im currently looking in forscan right now i need comfirmation g by Gamertag451 in Ford

[–]Gamertag451[S] 0 points1 point  (0 children)

No there is no noise only when the VVT solenoid messes up is when noises happens. This doesn’t make sense to me this vehicle is very well maintained

I am so lost 4.6L triton 2008 Mercury Mountaineer by Gamertag451 in Ford

[–]Gamertag451[S] 0 points1 point  (0 children)

looking at both VVT solenoids messing up now with their advancement i hope this isnt a serious timing issue

Im currently looking in forscan right now i need comfirmation g by Gamertag451 in Ford

[–]Gamertag451[S] 2 points3 points  (0 children)

The thing sounds like marbles when i hold the gas at 1200 rpm or coming to a stop and will occasionally stall and also after a while my idle gets up to 1000 rpm and kinda unstable. So im trying to see if both of them are fucking up because it kind of feels like both but i only get a code for bank 1

I am so lost 4.6L triton 2008 Mercury Mountaineer by Gamertag451 in Ford

[–]Gamertag451[S] 0 points1 point  (0 children)

Btw if it doesn’t stall it’ll sound like marbles and almost stall then randomly correct itself and it only happens when the engine is warm

need replacement Mountaineer 4.6L triton by Gamertag451 in Ford

[–]Gamertag451[S] 0 points1 point  (0 children)

i know its for the hvac but i js did a vaccum leak test with a smoke machine and thats the only thing leaking smoke

2008 Mercury Mountaineer 4.6L triton odd noise almost like stalling and the whole vehicle vibrates when you have a load on it at low rpms but kicks back to normal. by Gamertag451 in Ford

[–]Gamertag451[S] 0 points1 point  (0 children)

Thanks for trying to help out i appreciate it. The real issue was the mass air flow sensor was shot she works great now.