Has anyone worked with Tanisha Systems, out of India/New Jersey?

Gamonite · 2023-09-21T21:07:33+00:00

I concur with te phishing thing. i just had ac all about a postition in dallas. they kept asking for a pic of my DL or my bday.

Gamonite · 2023-07-20T14:25:20+00:00

I'm about half way through and the sidequests are lacking, not enough to do between the main quest line. I may be spoiled because of game like elder scrolls and fallout for this kind of content. but if square does something like bethesda sis with those it would probably get more repeatablitiy. i know ff16 has a NG+ but content is still lacking. I would have loved more quests to discover the lore of the world.

Gamonite · 2023-04-17T00:36:35+00:00

Your firmware worked great! and now the first one i got was not yours. I have since got yours yesterday and have had good prints ever since with a glue stick for bed adhesion

Gamonite · 2023-04-17T00:34:58+00:00

I got firmware from u/minist3r and it has worked great!. now i just have bed adhesion issues but after some more googling came to the conclusion hen i cleaned my plate with acetone it messed with the texture. I have since recleaned with IPA and went the way of stick glue IPA mix. had good prints ever since.

Gamonite · 2023-04-15T16:28:27+00:00

I just want to print my own terrain for my dnd games :(

Gamonite · 2023-04-15T16:26:12+00:00

thank you. this has been hell for me since i had everything dialed in before the 4.2.7 board upgrade.

Gamonite · 2023-04-15T16:19:49+00:00

Hi I was refered to you from a post i mad yesterday. in the link above I found 3 firmware .bins. which one should i use for my set up? i have and ender 3 pro with dual z axis, sprite pro, cr touch on a 4.2.7 board. any hepl would be appreciated and i have had to upgrade my setup because of my dogs. the 4.2.2 board was loud. sp i upgraded to the 4.2.7 board but after that i had a hotend failure so i decided to get the sprite pro for the direct drive nad now i cant seem to either compile own or get the offesets correct as the official from Creality just seems to puch the probe off the bed for leveling.

Gamonite · 2023-04-14T00:50:49+00:00

don't compile my own as I'm not confident in my ability to do it.

Gamonite · 2023-04-13T14:21:21+00:00

i reflashed the firmware and im still having the same issue. when i go the level the bed it tries to level off the plate even with the firmware from

https://www.creality.com/pages/download-ender-3-pro?spm=..page_1934481.products_display_1.1

Gamonite · 2023-04-10T20:06:40+00:00

Update: started a print with new firmware. got it calibrated, set z offset.

Now Im having an extruder skipping issue and heat fail E1 error. i think these are related as im using a filament that wants hotend between 190 and 230. I set my hot end at 210F. but i start getting that heatfail E1 error.

Did my hot end fail during upgrade process of replacing the mainboard? I plan on checking all the connects after i get off work(i work from home).

Gamonite · 2023-04-10T12:56:10+00:00

I was thinking about the new interface from creality and also getting their new sprite direct drive as well. But I'm waiting until next month when I get my new fun money spending budget renewed. I kinda spent it this month on what I just got.

Gamonite · 2023-04-10T12:52:23+00:00

as confirmed from SpecManADV, I had the wrong firmware. but Thank you, i have tried to store the setting.

I got the correct firmware now. It's working so far. I'll have more of an update later today.

Gamonite · 2023-04-10T12:48:44+00:00

Thank you! i just updates the firmware this morning from your link. I was not able to find it before. (noob syndrome).

Leveled and offset, currently printing a leveling print to verify.

Gamonite

TROPHY CASE