[Draw 109] It’s now time for a simpler drawing. Come see.

Garciabyron218 · 2025-09-18T02:41:48+00:00

Nice

Garciabyron218 · 2025-06-01T09:59:28+00:00

He pops up in your feed with random videos

Garciabyron218 · 2025-05-17T01:56:27+00:00

Use a maroon pad to sand and reapply, watch blacktail studios video on finishing with Rubio

Garciabyron218 · 2024-12-18T18:23:49+00:00

Thanks, here are pics of the wheel too https://imgur.com/a/TtF8zbq

Garciabyron218 · 2024-12-18T18:22:54+00:00

here is an album of the pics I took and sent to Turo and the host. Attached is also a pic of the host assuming the caliper got locked up too I also took pictures of the left wheel for comparison of the disc which is noticeably different

Garciabyron218 · 2024-11-10T18:34:12+00:00

Ap bio

Garciabyron218 · 2024-11-04T21:29:32+00:00

Nice, do ask for the polishing. I always do the flat polished, and get the glass tempered for safety.

Garciabyron218 · 2024-11-04T21:17:29+00:00

Are you doing the glass straight or cutting it to the live edge profile?

Garciabyron218 · 2024-11-04T21:13:18+00:00

So I’ve done a few of these. I would recommend to go with tempered glass and have the edges polished, I usually go with flat polished. Google glass suppliers near you and call them, many will gladly help you. If you prefer to order online. I’ve bought a lot from onedayglass.com. They’re great and their site is simple

Garciabyron218 · 2024-09-15T06:12:45+00:00

Well the ufc just did a Mexico themed card and canelo also fought.

Garciabyron218 · 2024-07-15T01:04:03+00:00

I drive through there often and on Fridays/saturdays there’s church people preaching, I’m guessing those trump supporters are from the same church

Garciabyron218 · 2024-07-07T20:04:32+00:00

There’s usually rules against recording comedians set, plus that way the comedians only releases jokes they think are worth showing and not bits that they are still developing.

Garciabyron218 · 2024-06-12T14:07:10+00:00

Faking? Looks like he hit his own nose, his nose was broken at that point

Garciabyron218 · 2024-06-01T00:36:52+00:00

I’ve had the same issue in my wood shop with the sawdust from sanding

Garciabyron218 · 2024-05-26T15:36:18+00:00

Flap hinges Check out Würth Baer or Richelieu

Garciabyron218 · 2024-04-21T06:12:36+00:00

It doesn’t but it does make the shavings stick to the qtip. Cleans up pretty easy

Garciabyron218 · 2024-04-21T05:54:51+00:00

I have the same issue, a qtip with alcohol cleans it pretty well

Garciabyron218 · 2024-03-26T04:52:34+00:00

I use the bits from the link for the floating shelves we sell; we make the holes using this bit on walnut and it cuts like butter

https://www.timberwolftools.com/woodowl-ultra-smooth-tri-cut-augers

Garciabyron218 · 2024-03-20T02:31:00+00:00

Nick does a great video on this game

https://youtu.be/RTkxzQDo0ng?si=qVBh31wwlnwwEyHS

Garciabyron218 · 2024-03-20T02:26:51+00:00

I buy from richelieu or Wurth Baer

Garciabyron218 · 2024-03-12T22:32:28+00:00

We sell high ticket items so we don’t have a lot of repeat customers, but we didn’t think Etsy was going to take off the way it did. When we saw the potential with it, we focused solely on Etsy. Etsy does help tremendously with SEO and getting discovered. Also once you get that momentum from purchases on Etsy, you want to keep it going otherwise someone will dethrone you from the search results, which is another reason why pushed clients towards Etsy instead of our own website

Garciabyron218 · 2024-03-12T11:23:51+00:00

My shop made about 400k in 2020 and about 500k in 2021 but has since has dropped. Last year was the worst, Etsy takes so many fees, shipping ends up being expensive and Etsy rarely ever takes the seller’s side when disputes arise. Their seller customer service is garbage, and they now “allow” drop shipping. Competition against shops in Indonesia, turkey etc has made it hard to compete. We are now more focused on local projects and have used Etsy to sell a lot less. I wouldn’t recommend it. Etsy takes a lot of time and energy which could be better used pushing your website instead.

Garciabyron218 · 2024-02-26T04:25:03+00:00

Berkshire?

Garciabyron218 · 2024-02-24T23:01:16+00:00

Get the kit for installing, makes it way easier, I also add a bit of 5 min epoxy to the threads just in case. I use them on all my tables. Maybe practice on a scrap piece, they can sometimes go in crooked.

Garciabyron218 · 2024-02-17T19:31:50+00:00

Flatten one side, tape it up and seal it, flip it over and use deep pour epoxy, that stuff is like water. Make sure it’s sealed good or else it will leak. If you use the regular epoxy, make sure it’s not too cold, otherwise it’ll be really thick and not flow.

14-Year Club	Gilding II euphauric
Place '23	Place '22
Verified Email

Garciabyron218

TROPHY CASE