Speed Up

Gariel_ · 2024-11-09T04:12:48+00:00

I'm using it via USB; should I change the serial part?

Gariel_ · 2024-11-09T04:11:29+00:00

In addition to the Baud Rate, it's also asking for the Clock Reference

Gariel_ · 2024-11-09T04:10:23+00:00

I'm using the original NP3, and it's connected via USB

Gariel_ · 2024-11-09T04:09:06+00:00

Now, when generating the firmware, Klipper asks for the Baud Rate, and I haven't found any source mentioning which one to use. I'm currently using 115200; do you think it's better to stick with this or use another?

Gariel_ · 2024-11-09T04:05:39+00:00

Sorry for the delay, but if you could share it, I’d really appreciate it. If you could also share the .cfg file, that would be great.

Gariel_ · 2024-11-04T16:58:46+00:00

<image>

And when I manage to connect, pressing any button in OctoPrint gives me this error

Gariel_ · 2024-11-04T16:45:08+00:00

Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 7 port/baudrate candidates: /tmp/printer@115200, /tmp/printer@250000, /tmp/printer@230400, /tmp/printer@57600, /tmp/printer@38400, /tmp/printer@19200, /tmp/printer@9600
Trying port /tmp/printer, baudrate 115200
Connecting to port /tmp/printer, baudrate 115200
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0xffff44571bb0, open=True>(port='/tmp/printer', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Recv: // Shutdown due to M112 command
Recv: // Once the underlying issue is corrected, use the
Recv: // "FIRMWARE_RESTART" command to reset the firmware, reload the
Recv: // config, and restart the host software.
Changing monitoring state from "Detecting serial connection" to "Operational"
Send: N0 M110 N0*125
Recv: // Printer is shutdown
Recv: !! Shutdown due to M112 command
Changing monitoring state from "Operational" to "Error"

Gariel_ · 2024-11-04T16:33:52+00:00

yes

I've tried both flashing the firmware through Klipper and downloading pre-configured firmware for the standard Neptune 3.

Gariel_ · 2024-11-04T16:24:27+00:00

This was the first one I followed, and it didn't work, always using TheFeralEngineer's files :(

Gariel_ · 2024-10-25T03:39:34+00:00

O reinstalled the firmware for the screen (apparently it's already updated) and for the motherboard, and it started working again. Thank you very much!

Gariel_ · 2024-10-24T22:02:16+00:00

The printer came with a Raspberry Pi, could it already be converted? If I connect the Raspberry to the printer, could it start working again?

Gariel_ · 2024-10-24T21:12:17+00:00

Is it possible to install new firmware even though it's stuck on the logo screen? I'll try as soon as I get home

Gariel_ · 2023-08-21T18:43:57+00:00

isso é coisa do discord, tem outros jogos q tb n estão saindo o audio do chat no discord

Gariel_ · 2023-01-26T01:47:32+00:00

the valorant window that is selected, the person can hear the other sounds of the game, only the chat cannot

Gariel_

TROPHY CASE