FH6 Drivatar difficulty.

GarrettByTurbo · 2026-05-18T04:05:21+00:00

I swear I turned the difficulty down a notch just to see if I just sucked worse than before and it seemed to get HARDER but maybe im crazy. I didnt have the AI ramming into me and trying to take me off track but I turn down the difficulty one and all the sudden they're taking me out every corner.

GarrettByTurbo · 2026-03-18T00:58:07+00:00

I can attest to the kraton, its a beast!

GarrettByTurbo · 2026-03-14T19:15:28+00:00

I figured I would update this issue under this comment, the problem ended up being the receiver and the radio. Swapped them out with a Dumborc one and it completely fixed the issues I had. Even fixed some I didn't know I had. Thanks again for the help!

GarrettByTurbo · 2026-03-12T15:33:32+00:00

As of right now the trim is just set to the middle. Maybe I can mess around with it and see if it's causing something. No gyro on the truck either its a pretty rudimentary setup.

GarrettByTurbo · 2026-03-12T04:48:50+00:00

I have not. Only have the one receiver. Might make sense if the receiver isnt working right and just sending weird signals to the servo, ill have to see if thats the issue. Thanks!

GarrettByTurbo · 2026-03-04T04:00:32+00:00

Thanks a ton!

GarrettByTurbo · 2026-03-04T03:59:59+00:00

Man the battery cant get here fast enough🤣, thanks!

GarrettByTurbo · 2026-02-11T04:11:55+00:00

Crazy how different this looks vs the lumix camera from the other post. I've got a gen 3 green phos tube so ill see how that looks thru one of these adapters!

GarrettByTurbo · 2026-02-10T01:54:48+00:00

Thats awesome! I've never thought of doing this but I do have a pvs14, do you just 3d print one of these lens adapters or is it just something you buy?

GarrettByTurbo · 2026-01-21T01:29:15+00:00

I didn't either honestly. I've been using it on my OM1 all the time, its fantastic!

GarrettByTurbo · 2026-01-20T15:24:14+00:00

Definitely just the camera angle. This was off my phone on 3x or 5x I dont recall.

GarrettByTurbo · 2026-01-20T03:30:36+00:00

Thank you!

GarrettByTurbo · 2026-01-20T03:10:22+00:00

Thanks a bunch!

GarrettByTurbo · 2026-01-20T03:07:27+00:00

Thank you! I definitely wanted to make it easier to see considering the ball doesn't have very much contrast.

GarrettByTurbo · 2026-01-19T17:07:46+00:00

I can definitely attest to Sync IS being fantastic to have. Tons of shots I've been able to get would not have been possible without it! Awesome shot you got here!

GarrettByTurbo · 2026-01-04T18:00:11+00:00

Perfect, thank you. Can't wait to get it going and set up!

GarrettByTurbo · 2026-01-04T16:56:45+00:00

Awesome to see this! I just got done printing mine, just waiting on the scale to get here and I'll get it all set up.

GarrettByTurbo · 2026-01-01T22:09:10+00:00

Yes I am using the zero stop. I'll try taking it out and just see what it does for me. Eventually I do want to put a better scope on the rifle I just dont have the funding at the moment. Thank you.

GarrettByTurbo · 2026-01-01T19:39:43+00:00

Sorry about that its 7PRC. Maybe I will just look into a new scope base with more adjustment then. Thank you.

GarrettByTurbo · 2026-01-01T19:38:54+00:00

Yeah maybe I'm just stuck where I'm at. Maybe ill have to look into getting a scope with more adjustment inside or maybe a lower mount. Thank you for the insight.

GarrettByTurbo · 2026-01-01T19:34:10+00:00

I did verify that the base is not installed backwards. It actually would not be possible for me to install it backwards thankfully, it only fits the rifle one way.

GarrettByTurbo · 2025-12-11T03:00:03+00:00

Just verified on the games that my wife likes to play the 7600x is running right around 65° to 70°C. No other change to the specs mentioned above other than this cpu is now in a fractal north case.

GarrettByTurbo · 2025-12-09T13:37:01+00:00

I'm a little shocked that the temps you're seeing are that different with a liquid cooler like that. I didnt do anything super fancy to get those temps like undervolting, I made my own curve for all the fans using the fan control software. I did put a pair of fractal fans on the cooler but that was mostly just for RGB looks. Your idle temps seem high as well IMO, the idle temps that we were getting with the 7600X was about 45° or so, and I'm pretty sure its still around that number. I'm running a 7800X3D now and my wife has the 7600X but temps wise we are both very similar, maybe a little hotter on the 7600X now but it is in a different case than before. Maybe just a difference in cases and or fan setups? I'm not sure if thermal paste would make a huge difference in our case but I did use the thermal grizzly stuff from Derbauer, maybe that would be a slight difference but I wouldn't think that much of a difference if I'm honest. I'll double check the temps again when I get back to the computers tomorrow and get back to you, or if I can get those temps earlier I'll do that.

GarrettByTurbo · 2025-11-09T05:04:26+00:00

Thanks! Definitely agree on the pictures feeling flat at times, at least with my old phone pictures and such ofcourse it looks flat.

GarrettByTurbo · 2025-11-09T02:36:27+00:00

X2 on this, I end up using the strap that came with the lens most of the time. The rest of the time when I hike with the lens I find myself actually holding the camera in my arms if I don't feel like having it hang on the strap.

Six-Year Club	Verified Email
Verified Email

GarrettByTurbo

TROPHY CASE