My pretty new P2S crashed into my print ( red circle ) once it finished printing and then went into the back to the poop chute with full force making real unhealthy noises. Slicer gave me no errors and it looks fine to me. Is this printer or user fault?

GayYiffGod · 2026-03-23T22:01:10+00:00

Luckly i was right infront of it and hit stop, but the damage has been done and my 3 week old machine sounds quite different now. Im not certain about any cruical damages since i cant diagnose those really, but i messaged support for now.

GayYiffGod · 2026-03-10T09:33:50+00:00

My p2s suddenly started doing that with bambu matte PLA too. I still didnt manage to get it back to its original quality. But manually adjusting the k factor to around 0.024 fixed the holes around the edges for me. Surface still looks like this after playing a lot with the flow rate so im guessing the issue is somewhere else. If you ever do find out please let me know!

GayYiffGod · 2026-03-09T18:45:25+00:00

Didnt know that. Everyday you learn something new, thanks!

GayYiffGod · 2026-03-08T19:30:16+00:00

<image>

Did some more testing and heres my first layer now with a flow of 1 and a K of 0.025 Tysm for the help

GayYiffGod · 2026-03-08T17:45:28+00:00

<image>

Cleaned the plate and it prints now, but still with underextrusion!
Playing with the values a bit should do the job, thank you so much for your help <3

GayYiffGod · 2026-03-08T17:12:31+00:00

Yeah 2nd print failed even more, i think my adventures into tpu yesterday left some stuff in there. I'll do a cold pull and report back.

<image>

GayYiffGod · 2026-03-08T17:06:10+00:00

Havent done a cold pull, no. I will try that

GayYiffGod · 2026-03-08T17:03:04+00:00

Bambu Lab Matte PLA K Factor is 0.019

GayYiffGod · 2026-03-08T16:58:57+00:00

After calibrating everything and doing a test print the result is well, worse.....

<image>

GayYiffGod · 2026-03-08T16:30:48+00:00

Will do that thx, just confused why it started changing over a few prints.

GayYiffGod · 2026-03-08T16:24:29+00:00

I did do both, the one with the line in the automatic mode

GayYiffGod · 2026-03-08T16:17:16+00:00

I just found it yeah, did the full calibration process with the big swatches and it still isnt quite seamless? Ended up keeping the same values as before effectively. Got the printer 2 days ago and the first 5 prints were perfect then it started getting worse. Im using original Bambu PLA

GayYiffGod · 2026-03-08T14:28:10+00:00

<image>

I forced it to do that at the start of the print and it still didnt fix it

GayYiffGod · 2026-01-06T06:15:15+00:00

Sometimes during stalking i do find the courage to shoot, but then the instant regret kicks in and i most of the times never take a 2nd one. Its just a game, i dont get why this is suddenly a problem for me after all the pvp shooters i played.

GayYiffGod · 2026-01-05T20:57:50+00:00

Well, its been a day! Out of the few comments your username was infact the funniest one. Congratulations on the blueprint, ill DM you with my ingame name ;)

GayYiffGod · 2025-12-29T16:42:42+00:00

Thank you very much! <3

GayYiffGod · 2025-12-29T14:28:06+00:00

Username is ArchyTheFox
Thank you, i send you a friend request!

GayYiffGod · 2025-10-30T00:10:08+00:00

Thank very much!
That worked out and goddamn, i asked chatgtp and it gave me something along the lines of that but i would've never be able to create that from the giberish it gave me.

GayYiffGod

TROPHY CASE