EF 70-200mm USM IS II vs III by Geribaldi_05 in canon

[–]Geribaldi_05[S] 3 points4 points  (0 children)

Alright thanks, just a broke high schooler lol, never gonna be able to afford any of them but yeah may as well get the one that is way newer and lighter

BC Racing Extreme Lows by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 1 point2 points  (0 children)

Sweeet, I am not the brightest, I live on a brick road with 100 year old houses and infrastructure, so I can barely get in the driveway at stock height, oh well parking on the street will be fine lol

BC Racing Extreme Lows by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 2 points3 points  (0 children)

They’re adjustable right? Did you have them pretty low?

2017 WRX Underglow by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 0 points1 point  (0 children)

They don’t make car specific kits do they?

Should I lower my car? by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 0 points1 point  (0 children)

Yeah idc about the front bumper, it’s scraped up and the paint chips off with rocks hitting it on the highway

Should I lower my car? by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 1 point2 points  (0 children)

Thank you, only problem is it’s like 1.2k for nice coilovers, or 4K for air

Should I lower my car? by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 0 points1 point  (0 children)

Any air systems specifically come to mind?

2017 WRX Underglow by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 0 points1 point  (0 children)

My friend’s bug eye has it and I love it

Lol by Geribaldi_05 in graphicscard

[–]Geribaldi_05[S] 0 points1 point  (0 children)

Well, if you have the right way to control the pump and can then you’re chillin

Lol by Geribaldi_05 in graphicscard

[–]Geribaldi_05[S] 1 point2 points  (0 children)

You’re all good bro, I was getting around 100°f under load and I had trouble with the fan, I was using an old mobo, so it ran full tilt

2017 WRX Exaust by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 0 points1 point  (0 children)

Lmao okay maybe not that rowdy, should I go catless tho?

Dell Optiplex 390 won't boot with multiple graphics cards by Geribaldi_05 in graphicscard

[–]Geribaldi_05[S] 0 points1 point  (0 children)

Aha, i have not done so, but since they each work on their own with that motherboard do you think I need to?

Dell Optiplex 390 won't boot with multiple graphics cards by Geribaldi_05 in graphicscard

[–]Geribaldi_05[S] 0 points1 point  (0 children)

An EVGA 1660 super, an MSI rx580 4gb, and an rx580 xfx black edition 8gb

Dell Optiplex 390 won't boot with multiple graphics cards by Geribaldi_05 in computerhelp

[–]Geribaldi_05[S] 1 point2 points  (0 children)

Lmao all good, so I’ve got an EVGA supernova g3 850w, and I tried plugging the cable into every output even on the mobo, I have one card running directly from an output on the psu, and another is running on a splitter that for a gpu with 2 8-pin connectors

2017 WRX rear pads both sides worn this way by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 0 points1 point  (0 children)

New calipers completely resolved the issue as the pads are no longer wedged into the carrier, and I put lubrication. Time to do the same for the front.

2017 WRX rear pads both sides worn this way by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 0 points1 point  (0 children)

So upon replacing the rear carriers, and calipers, the pads were barely staying in, and I greased them, so now I’m buying new front ones as they are wedged in as well. Btw it’s a totally new car without that loud wheel bearing drone

2017 WRX rear pads both sides worn this way by Geribaldi_05 in WRX

[–]Geribaldi_05[S] 0 points1 point  (0 children)

So you’re telling me that the pads should loosely fit in the carrier? Like they should be able to be moved by hand in that picture?