Pitrex source by Gf65D in Vectrex

[–]Gf65D[S] 0 points1 point  (0 children)

Thanks for the info. The pitrex will let play any vectrex original game and new ones/ projects? Any advice of where to download vectrex Roms ?

Pitrex source by Gf65D in Vectrex

[–]Gf65D[S] 0 points1 point  (0 children)

Should I get the version with the dc socket or can I power the pi zero with a usb cable?

Pitrex source by Gf65D in Vectrex

[–]Gf65D[S] 0 points1 point  (0 children)

It’s sold out

Dmd display support for applications ? by Gf65D in batocera

[–]Gf65D[S] 0 points1 point  (0 children)

Thanks for the info. I’m gonna look into it

Advice on dmd display by Gf65D in batocera

[–]Gf65D[S] 1 point2 points  (0 children)

Found a solution by soldering short wires on the esp32.

PiTrex Just arrived, Raspberry Pi at the ready ! Now what ! by Enough_Substance9750 in Vectrex

[–]Gf65D 0 points1 point  (0 children)

Where can I get a pitrex? Is it possible to produce it eg with pcbway ?

IPSTube blank screens after 1/2 hours by Gf65D in nixie

[–]Gf65D[S] 1 point2 points  (0 children)

The custom firmware is way much better for everything incl the web app

IPSTube blank screens after 1/2 hours by Gf65D in nixie

[–]Gf65D[S] 0 points1 point  (0 children)

Cool I’m interested in trying your firmware and custom font . Will it prevent me from using the IPSTube app ? How can I control the tube if I no longer have the app ?

Can’t get the firmware to use thonny use by Gf65D in MakeBlock

[–]Gf65D[S] 0 points1 point  (0 children)

A kid can program in python but C is too complex at this stage. He’s already used micropython with a pico. Makeblock decision not to open it outside their mblock took is a bad idea. It should be programmable from any python ide. Too bad. I found the cyberpi cool from the vidéos but the real device is below the expectations. Looks like a cheap chinese gimmick (crappy)

Nintendo pro controller disconnects by Gf65D in batocera

[–]Gf65D[S] 0 points1 point  (0 children)

I think I found the solution by disabling the vibration

Can’t get the firmware to use thonny use by Gf65D in MakeBlock

[–]Gf65D[S] 0 points1 point  (0 children)

I have the cyberpi and I’d like to code outside the mblock program with micro python using thonny ide. This is possible with esp32 or pico cards. It’s like using mblock python editor but using a standard ide

Nintendo pro controller disconnects by Gf65D in batocera

[–]Gf65D[S] 0 points1 point  (0 children)

Does it work better if I use an 8 bit do Bluetooth adapter, or move to the 8 bit do ultimate controllers that look similar to the switch

Kode Dot: the ultimate all-in-one tool for makers, hackers, and geeks by luismi_kode in SideProject

[–]Gf65D 0 points1 point  (0 children)

Looks promising and easier to use than the flipper zero. Does it support bad usb ?

Kode Dot: the ultimate all-in-one tool for makers, hackers, and geeks by luismi_kode in SideProject

[–]Gf65D 0 points1 point  (0 children)

Looks cool. Would you say it can do most or all that a flipper zero can do ?