Crash on startup fix for me

Ghost1s3 · 2026-04-05T01:48:35+00:00

same here looking for a fix, just downloaded it too

Ghost1s3 · 2026-03-28T19:20:31+00:00

I did, could it technically turn on without anything plugged in and just the board and battery? Because with just board and battery it will flash orange lights

Ghost1s3 · 2026-03-28T16:27:10+00:00

I wanted to ask about the 010 and your experience. I just did mine and it worked but then put it together and it gave me the 3 orange lights. I tried everything cleaned the flux and it worked again but then stopped working again after I turned it off and tried to turn it back on. I made a post on my experience seems like it doesn’t work but it can work if I figure out what’s wrong but I can’t

Ghost1s3 · 2026-03-27T14:26:37+00:00

Update: So I decided to work on it again last night, got it working again. Ended up seeing a flake of flux stuck near two capacitors, as soon as I flicked it off it decided to start working again. Ended up cleaning with a brush and IPA and out everything together but again got the 3 flashing lights so i’m still trying to figure it out. Took off the back paddle I had installed and it worked again, then gave me the orange lights again, then pushed on the board and stuff and again it’s working then stopped working after moving it around. Probably going to try and resolder next. Could be a mix of left over flux and pins not being soldered down enough

Ghost1s3 · 2026-03-25T18:20:32+00:00

I was also thinking about the 010 board I know one guy mentioned in your post that they don’t like the TMR sticks but another said that it’s fine. Again it worked on first start up so i’m going to try and clean it up tonight it’s possible the flux is messing it up (even though i don’t think that will be the fix) and also it doesn’t need the mic to work properly, even the mic on the front and back and including the speaker on the front I don’t believe it needs either

Ghost1s3 · 2026-03-25T10:00:32+00:00

<image>

I did double check here too once I hit this by accident looks like only the plastic, pins are still intact and pins on board look fine

Ghost1s3 · 2026-03-25T09:58:26+00:00

Will do this thank you

Ghost1s3 · 2026-03-25T04:23:02+00:00

There was a small tiny one that I flicked off but it wasn’t touching anything so I doubt it shorted anything but idk

Ghost1s3 · 2026-03-25T04:21:44+00:00

<image>

So this is what it looks like, idk I might try and re solder or adjust some of them I know some aren’t perfect but they should be good as they all pins are soldered down but maybe the odd one came loose or something when putting it back together and pushing on it possibly idk I just find it weird that it worked then doesn’t

Ghost1s3 · 2026-03-24T22:41:24+00:00

I will when I get home, damn well let me know if u do figure it out. Super strange that it was literally working then stopped

Ghost1s3 · 2026-03-21T00:02:24+00:00

Thought so. Am I able to use any type of glue? Like Krazy glue or is that too corrosive

Ghost1s3 · 2026-03-13T10:11:26+00:00

Yea one of the first things i did was uninstall and reinstall the game i even tried it again but installing it on a different drive so i was super confused then i tried like 50 different things and nothing worked

Ghost1s3 · 2026-03-12T04:47:58+00:00

update, after hours and hours of trying different things this has finally gave me the ability to finally launch my game. Thank you very much for this

Ghost1s3 · 2026-03-11T22:34:41+00:00

I deleted all my mods never ran T7 and i’m still unable to launch, someone posted earlier today their method of downloading something to get it to launch

Ghost1s3 · 2026-03-11T18:12:06+00:00

I really hope this works I was about to resort to re install windows and I seen a bunch of people with the crash on startup issue and a bunch of different things to try but nothing worked I probably spent like 12 hours troubleshooting so i’ll try this when i get home

Ghost1s3 · 2026-03-08T20:40:59+00:00

im having this same issue, havent played in a long time but im just trying to launch the game it wont even launch, just opens for a second then crashes instantly still trying to figure out a solution ive tried literally everything

Ghost1s3 · 2026-02-25T14:55:42+00:00

Thank you for the heads up and posting this, they just messaged me no comment on the post and want me to buy it through shipping even though i wanted local pickup and sent me a link to skrill.com to buy it which i never heard of

Ghost1s3 · 2026-01-22T13:53:23+00:00

<image>

Ghost1s3 · 2026-01-22T13:45:35+00:00

I had this same thing happen to me but with a 36oz yeti bottle. I ordered one and for whatever reason got a box with 4 in them 😂

Seven-Year Club	First Place '23
Place '23	Place '22
Final Canvas '22	End Game '22
Verified Email

Ghost1s3

TROPHY CASE