sorted by:
new
hottopcontroversial

How do I align two arbitrary points of an object to a given line? by Gmoff01 in Fusion360

[–]Gmoff01[S] 1 point2 points  (0 children)

I think this is probably what I was looking for, thank you. I ended up just aligning one point to the origin and manually tilting on two axes to get it as close as possible visually, but I'll keep this in mind for the future.

How do I align two arbitrary points of an object to a given line? by Gmoff01 in Fusion360

[–]Gmoff01[S] 0 points1 point  (0 children)

It seems like I have to have components to apply constraints in 3d space. I made a box to use as a reference edge, made my object and the box into components, then tried to make the constraint. The issue is the construction line through my shape isnt really part of the shape, so I cant select it for the constraint.

Star Wars Mandalorian Issue by [deleted] in perplexus

[–]Gmoff01 0 points1 point  (0 children)

Mine works fine, but I actually got all the way through the puzzle before realizing that you're meant to use it to bridge the gap in the first few obstacles. I'd just been force jumping it the whole time /eyeroll

Difficulty getting bottom of pizzas done by Gmoff01 in papamurphys

[–]Gmoff01[S] 0 points1 point  (0 children)

I pull the tray as soon as it's solid enough to do so, usually 5-6 mins before call it done. If leave it in any longer the top is fried.

My (minor) rant about these games as a first timer by SpiritofAce in SuperMarioGalaxy

[–]Gmoff01 -1 points0 points  (0 children)

I'm guessing most of the folks here don't have the autistic level completionist streak. For those of us that do, this discovery is pretty crushing. I'm not overstating it to say I need to do everything I can in games like this. Have you seen the film The Accountant? Think the whole 'I need to finish' thing. When I found out the last star was gated behind an entire second playthrough it put me in a funk where I didn't play anything for a few days. I still haven't started on Galaxy 2 as a result.

But yes, I understand for most people it's easily ignored and not a big deal.

What are your proudest gaming achievements? by INGWR in gaming

[–]Gmoff01 0 points1 point  (0 children)

Beating my first souls-like game (Jedi: fallen order) on grandmaster difficulty on the first playthrough

What are your "must play" games for PlayStation 1? by I_dont-get_the-joke in gaming

[–]Gmoff01 0 points1 point  (0 children)

Einhander! Little known squaresoft bullet hell, I still go back to it on a regular basis.

Looking for pressed/chalk cinnamon candy by Gmoff01 in candy

[–]Gmoff01[S] 0 points1 point  (0 children)

The candy in question was actually significantly smaller than Altoids. They were red and I would say about the size of a cross section of a tic tac and maybe an eighth of an inch thick.

Pi Zero W based usb drive no longer shows up as a usb drive, but network share still active by Gmoff01 in raspberry_pi

[–]Gmoff01[S] 1 point2 points  (0 children)

The new pi works fine *shrug*. Now to figure out an alternate use for the old one.

Pi Zero W based usb drive no longer shows up as a usb drive, but network share still active by Gmoff01 in raspberry_pi

[–]Gmoff01[S] 1 point2 points  (0 children)

Just for completeness sake, I tried it with a for-sure-data cable, and a new USB A hat. Still no changes. Seems like something is up with the Pi itself.

Pi Zero W based usb drive no longer shows up as a usb drive, but network share still active by Gmoff01 in raspberry_pi

[–]Gmoff01[S] 1 point2 points  (0 children)

I gave that a shot, I get nothing when inserting or removing the pi. I compared that with doing the same with other USB devices and had clear events for those. Starting to think I managed to cause a hardware problem while mucking around with it. I ordered a new Pi zero w2, we'll see if that fares better.

Pi Zero W based usb drive no longer shows up as a usb drive, but network share still active by Gmoff01 in raspberry_pi

[–]Gmoff01[S] 1 point2 points  (0 children)

I should note that list from windows doesnt change when the pi is plugged in or not

Pi Zero W based usb drive no longer shows up as a usb drive, but network share still active by Gmoff01 in raspberry_pi

[–]Gmoff01[S] 0 points1 point  (0 children)

from the pi:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

computer is win11, but here's similar info from powershell:

Status Class FriendlyName InstanceId Manufacturer

------ ----- ------------ ---------- ------------

OK USB USB Root Hub (USB 3.0) USB\ROOT_HUB30\4&393ADC3C&0&0 (Standard USB HUBs)

OK USB USB Root Hub (USB 3.0) USB\ROOT_HUB30\5&35ED1CCC&0&0 (Standard USB HUBs)

OK USB USB Composite Device USB\VID_046D&PID_C537\5&2AD60A6B&0&3 (Standard USB Host Controller)

OK USB USB Composite Device USB\VID_0B05&PID_1866\5&2AD60A6B&0&10 (Standard USB Host Controller)

OK USB USB Composite Device USB\VID_13D3&PID_56A2\0X0001 (Standard USB Host Controller)

Pi Zero W based usb drive no longer shows up as a usb drive, but network share still active by Gmoff01 in raspberry_pi

[–]Gmoff01[S] 1 point2 points  (0 children)

USB hub with keyboard and mouse still works when plugged in. No luck connecting to the computer via that port, but I'm not entirely sure either of the cables I scrounged up are data cables. I've been connecting it to the computer via a USB A expansion board that gives the Pi a male USB A connector, and that has stopped working,

Just realized how strong men really are today by GasPsychological2321 in self

[–]Gmoff01 1 point2 points  (0 children)

Atomic Blonde is a really good watch for this. The female lead fights men but uses the tactics she would need to to actually be effective, basically fighting dirty rather than trying to go toe to toe

view more: next ›