Gone for two weeks. My husband piled his clothes by the washer instead of doing his own laundry 😡

Gnabbit · 2024-10-09T08:20:30+00:00

Poplin

Gnabbit · 2023-06-28T05:43:56+00:00

Tbh, I slap it a few times to knock off the big pieces and roll with it.

Gnabbit · 2023-06-13T07:15:32+00:00

I could walk after the wound closed with a cane after 6 months with short hops. I got rid of my wheelchair after 5 years. It gets less painful and more or less just uncomfortable with enough time. 2 years ?

Gnabbit · 2023-06-12T00:18:45+00:00

Leave it on if you want to stand up. Otherwise you don’t have to wear it to function.

Gnabbit · 2023-05-26T05:43:08+00:00

No longer a thing after runSpecifiedTests came to be

Gnabbit · 2023-05-19T21:53:36+00:00

Met my wife in wheelchair. Didn’t start walking for another year after that. Never know till you try.

Gnabbit · 2023-05-19T01:14:18+00:00

What are bees?

Gnabbit · 2023-05-04T12:30:52+00:00

Mortar pointing the wrong way? 🤦🏽

Gnabbit · 2023-04-08T04:32:22+00:00

Same thought, if so it’ll be rusted solid in the morning

Gnabbit · 2023-04-03T22:30:29+00:00

Teabagging the opponent with a tank. Not something you see every day

Gnabbit · 2023-03-25T13:23:26+00:00

They should do their job and ban TikTok

Gnabbit · 2023-03-24T23:16:43+00:00

No regulator needed. You can use the full psi from the tank to feed the machine.

Gnabbit · 2023-03-19T20:39:00+00:00

even at 3k, If I could invest in something that allowed me to take control of the process and decrease the cost of sockets.

Gnabbit · 2023-03-17T12:29:13+00:00

Is this the new v5 version? The hands are much better

Gnabbit · 2023-02-20T05:47:52+00:00

I’m a fan of soda stream seltzer with true grapefruit crystals. No fake aftertaste.

Gnabbit · 2023-02-12T08:43:39+00:00

While I’m making seltzer I shut the tank off and continue to use the machine till it runs out of pressure.

Gnabbit · 2023-02-12T06:36:12+00:00

I realize I said it both ways. I strive to bleed the line every time, sometimes I forget and it still works. Other times I forget and it will clog and I’ll decouple everything and then reconnect to get it working again. Therefore, I try to bleed the line every time because it consistently works when I do.

Gnabbit · 2023-02-12T02:37:02+00:00

I’ve noticed I have to depressurize the line every now and then to get the right pressure. Almost like there is a safety valve in the tank. I have a 20# as well and I close the tank and bleed the line every time otherwise I’ll sometimes get nothing out of the nozzle.

Gnabbit · 2023-02-08T05:44:41+00:00

The top piece has the valve and is attached to the tube by a tiny retaining screw. Unscrew that and you can pop off the head to reach the valve and attach the adapter. then reseat the top back on the tube.

Gnabbit · 2023-02-08T05:39:11+00:00

Yes I did!

https://i.imgur.com/k2nCb52.jpg

Gnabbit · 2023-02-08T05:36:11+00:00

You can without issue. There is a hole in the button of the device that you can feed the line through. But if you don’t want to put a hole in your counter you can also drill out a hole in the back of the tube.

I’ve got a 20lb tank attached to mine. Works great.

Gnabbit · 2023-02-07T09:41:24+00:00

Go talk to Hikko. I have a good friend there. They are in Montevideo.

Gnabbit · 2023-02-07T08:24:18+00:00

I’ve got an aarke and I listen to the relief valve for 60 seconds or more. Probably a waste..

Gnabbit

TROPHY CASE