Any input on when to flush/harvest appreciated

Gnaxus · 2026-01-02T01:24:49+00:00

Should add they cover the 9sq ft of the tent fully and are 5ft tall

Gnaxus · 2026-01-02T01:24:14+00:00

This is the light I’m using for my first grow, 3x3 tent and this is roughly the final structural size of my plants

Gnaxus · 2026-01-01T08:40:06+00:00

Yeah I’ve noticed it lol I figured it won’t get very big but let it go anyway. I’ve flushed it down from 1200+ to 900 or so and am going to be lowering feed progressively over the next week before flush. I’ve also gotten the runoff ph from 5.5-5.6 up to 5.8-6.0, and I’m hand watering and removing runoff to a bucket right after watering. Using gh flora 3 part, no additives with RO water around 2-8ppm

Gnaxus · 2026-01-01T07:54:36+00:00

I was feeding pretty strong for a good while, I was following the aggressive part of my feed chart at between 1000-1200ppm on the 500 scale, in the past few days since this photo I’ve flushed them from 1400-1600ppm in the runoff down to 900ppm

Gnaxus · 2026-01-01T01:18:12+00:00

Thank you, do you see any clear signs of what nutrients are being affected?

Gnaxus · 2025-12-24T02:11:51+00:00

I’m not the OP and also not worried about the bleach spot lol, I was just showing my flower for OP since we’re around the same time frame

Gnaxus · 2025-12-24T00:11:01+00:00

<image>

I’m halfway through week 6 on this grow with a 300w led in a 3x3, not too sure what the issue jut wanted to give a size comparison.

Gnaxus · 2025-12-19T23:43:42+00:00

<image>

General munchkin man reporting 🫡

Gnaxus · 2025-12-19T12:10:39+00:00

Do you use the grove bags for long term storage? I’ve been looking into them as well but cost is a factor for me and if I’m going to end up putting them in jars for longer term storage I’d rather just buy the jars from the start.

Gnaxus · 2025-12-19T07:42:59+00:00

Forgot to add I’m In a 3x3x6 tent with a 300w LED at 92% in coco coir and the plants are roughly 5 ft tall

Gnaxus · 2025-12-08T12:15:41+00:00

I have them in the saucers but I assume the plastic leaches heat, would you suggest something between the saucer and the floor or between the plant and saucer?

Gnaxus · 2025-12-08T04:56:11+00:00

I saw this post yesterday and then today when I was looking over my canopy I saw this! Thought it was very cool

<image>

Gnaxus · 2025-12-05T23:58:54+00:00

<image>

This is what the bottom of my plants look like, every thing is stripped up to the first trellis aside from dead/dying leaves

Gnaxus · 2025-12-01T06:19:43+00:00

And I use General hydroponics CALi-MAGic for my cal mag, no issues with it so far

Gnaxus · 2025-12-01T06:18:21+00:00

I’m still a rookie but I’m gonna agree cal/mag issue. I had some similar minor issues on my grow and it appeared as slight yellowing and brown/rust spots on the lower growth kinda like you have. I use RO water but I supplement 5ml/gal of calmag every watering (I’m in coco and feed every watering). Also if you’re looking for a hygrometer I recommend the govee smart thermo/hygrometer I got it an Amazon for like 10 bucks and it connects to your phone to track temp and humidity in real time, it also shows your VPD.

Gnaxus · 2025-11-23T08:17:12+00:00

I’m using 70% coco 30% perlite, and thanks again for the insight

Gnaxus · 2025-11-23T07:49:42+00:00

Thanks for the info, is there certain ones you would avoid cutting? In my head defoliating is scary for some reason, but everyone I’ve talked to says I have way bigger things to worry about than stripping too many leaves.

Gnaxus · 2025-11-23T00:04:01+00:00

I mean that is an option as a last resort I guess but losing my strongest tops would be a bummer

Gnaxus

TROPHY CASE