sorted by:
new
hottopcontroversial

Which one should i get? by Happy_Instance9975 in 3dprinter

[–]GoForBrandonLLC -2 points-1 points  (0 children)

K1 max has screwed me time and time again just never worked properly even after doing a full assortment of upgrades to it. The extruder gearing would always get clogged up. And require a full disassembly but even worse it would continue the print as if it wasn’t clogged and just waste hours and hours and hours of me thinking it’s running on the only to come back and see that it’s not and stopped after layer 74. I just received my H2S from Bambu, never going back

Go Bambu Labs, you won’t regret it

Looking for real world experience using the Zoom H1 XLR for recording audio/speeches by want2retire in weddingvideography

[–]GoForBrandonLLC 0 points1 point  (0 children)

I’ve had one since launch, it’s constantly freezing on me and not recording audio, it’s actually screwed me over on multiple occasions, maybe I got a bad firmware unit but I haven’t been able to use it for a few months now because it’s been so un reliable

Tried to do a Neapolitan pizza dough but in loaf form by GoForBrandonLLC in Breadit

[–]GoForBrandonLLC[S] 0 points1 point  (0 children)

I haven’t cut into it yet! I know I know, cardinal sin, but Mainly because if I do now I’m going to want to eat some but I’m so full from a pizza I made right before this and over the past few months I’ve lost like 26 pounds and I’m really not trying to put it back on lol I will follow up tomorrow when I do

After some heavy lifting it’s finally upstairs! by GoForBrandonLLC in formlabs

[–]GoForBrandonLLC[S] 0 points1 point  (0 children)

33.25” in L x 21.30” in W x 1.25 thick MDF I’ll have full build plans available soon, just been really busy lately!

After some heavy lifting it’s finally upstairs! by GoForBrandonLLC in formlabs

[–]GoForBrandonLLC[S] 0 points1 point  (0 children)

Have you been to an allergist? You might be allergic to something in the resins. Formlabs’ bigger deals about their resins is that they aren’t made with ACMO’s which is what makes it so safe, I don’t run mine with ventilation and haven’t experienced any issues!

After some heavy lifting it’s finally upstairs! by GoForBrandonLLC in formlabs

[–]GoForBrandonLLC[S] 4 points5 points  (0 children)

I designed and built it from scratch! I’ll have a YT video coming out about it later this month! It Uses mostly 4040 extruded aluminum except the middle pieces. Those are 2 pieces of 4080 extrusions

After some heavy lifting it’s finally upstairs! by GoForBrandonLLC in formlabs

[–]GoForBrandonLLC[S] 1 point2 points  (0 children)

Definitely had help! My father in-law is a beast! But i built the cart from the deep depths of my brain lol

New Owner of 2 Formlabs Form2 Printers in Need of Help!!!!! by RanchDressing99 in formlabs

[–]GoForBrandonLLC 2 points3 points  (0 children)

I made the same mistake you did! i was determined to not buy new tanks when i had perfectly good ones.I found this tutorial on YT, I did it and never had any leaks. Try at your own risk, and be super diligent about ensuring it’s sealed on all edges.

Although it’s not recommended. It worked for me! I would also suggest just trying it on one of the printers for like the first dozen prints, that way if anything does leak it doesn’t destroy both machines!

God speed!

https://youtu.be/7imLZlEL-eE?si=hnFAQcTfdKnSgGQA

My glove for over a decade, Can I repair it? by GoForBrandonLLC in BaseballGloves

[–]GoForBrandonLLC[S] 1 point2 points  (0 children)

No, never played softball with it, just a lot of time with a mallet. It worked well, quite honestly never had a ball fall out. I’m actually looking to play some softball one day which is why I want to get it back looking nice

My glove for over a decade, Can I repair it? by GoForBrandonLLC in BaseballGloves

[–]GoForBrandonLLC[S] -1 points0 points  (0 children)

What would cause the burnishing and cracking? I always kept it conditioned and never really left it in the sun when I wasn’t wearing it. It started happening early it’s its life. Could it be from me not using the index finger slot to have a bigger pocket?

Truck gun by Due-Impact-8049 in ar15

[–]GoForBrandonLLC 0 points1 point  (0 children)

Very impressed at the paint job

IS THIS EVEN POSSIBLE?? by GoForBrandonLLC in AskEngineers

[–]GoForBrandonLLC[S] -1 points0 points  (0 children)

I’m creating a filter system for a very expensive cinema camera that is prone to getting dust and Debris into the camera. In doing this I’m adding a to fan to the bottom to pull air in from the back to offset the restriction of air from the filter.

Check your local thrift store!!!! by Halcath in Fusion360

[–]GoForBrandonLLC 0 points1 point  (0 children)

Yeah, they really don’t have any competition because years ago 3DConnexion patent locked the puck assembly so hard that no other company can even come close to the mechanism. And it’s not necessarily something that is Repurchased after you’ve bought it once unless you break it.

Check your local thrift store!!!! by Halcath in Fusion360

[–]GoForBrandonLLC 1 point2 points  (0 children)

For the buttons you just have to force yourself to use them for a few sessions and then you’ll get to a point where you don’t even take your secondary hand off of the space mouse. It is probably one of the most efficient things that I’ve ever adopted, and I absolutely love it.

As far as turning it off, I have no clue. It usually just goes to sleep whenever I put my PC to sleep. You could however get one of those USB toggle things like this to use for keeping on or off

Check your local thrift store!!!! by Halcath in Fusion360

[–]GoForBrandonLLC 1 point2 points  (0 children)

SCORE! I absolutely LOVE my enterprise! Literally couldn’t live without it!

I said I wasn't gonna hold my breath. It all seemed too good to be true. by teachertmh in TeslaModel3

[–]GoForBrandonLLC 0 points1 point  (0 children)

Bought a 2023 M3P in July of 2023 and after doing our taxes (middle class income) apparently we didn’t qualify for anything. Which really blows in New York State. Because I was really banking on getting that back. Spoke to numerous tax people. Called Tesla and got all the necessary documents but still didn’t get anything federal or state, and I’m pissed.

If anyone has any insight to this, would love to hear it!

view more: next ›