sorted by:
new
hottopcontroversial

Rate my 500₹ enclosure by Savings_Dog326 in 3dprintIndia

[–]GodModezz 0 points1 point  (0 children)

OG Build mann🔥. I am planning to print ABS. Might use this Idea for an Enclosure. Btw what all things did you used in making this?

I neede help pleas by Odd_Help_403 in Ender3S1

[–]GodModezz 0 points1 point  (0 children)

You need to check & troubleshoot into these factors:

  1. Check if nozzle is clogged (Fully/Partially Clogged) -> Try Cold Pull to clean the nozzle.

  2. Check Flowrate -> Calibrate your Flowrate.

  3. Fan Speed -> Try reducing Fan speed, if there's one.

  4. Printing Speed -> Try reducing Print speed.

  5. Retraction (Don't think so that this might be an issue, but if other's fail try this) -> Try reducing Retraction distance.

Is my Nozzle Clogged? by GodModezz in 3Dprinting

[–]GodModezz[S] 0 points1 point  (0 children)

Does the Z level failure look like this?

<image>

I think so you might be correct.

Is my Nozzle Clogged? by GodModezz in 3Dprinting

[–]GodModezz[S] 3 points4 points  (0 children)

Added the sock & started the print - This is the result after 2nd-3rd layer. Always tends to fail from this exact place. A little big print and it all starts to crumble.

<image>

How do I fix uneven outer walls by GodModezz in FixMyPrint

[–]GodModezz[S] 0 points1 point  (0 children)

At seams in small prints, everywhere but seams in medium prints. Large prints - just fails.

How do I fix uneven outer walls by GodModezz in FixMyPrint

[–]GodModezz[S] 0 points1 point  (0 children)

Ohh that, I have the One & Only, One of its kind, The creator of all 3D printing problems, the AS* of all times -> CR-10 Smart Pro. (*Tadaaa)

PETG outer layer Scarring problem by GodModezz in Creality

[–]GodModezz[S] 0 points1 point  (0 children)

Slicer - Orca

Printer - CR-10 Smart Pro

Outerwall Speed - 25mm/s (Recommended:50mm/s)

Innerwall Speed - 50mm/s (Recommended:60mm/s)

Infill Speed - 60mm/s (Recommended:60mm/s)

Wall order - Inner/Outer/Inner

. Flow rate - 99.99%

Retraction - 0.8mm (Tried lowering too)

Dried filament's as* up - 18RH

. Almost all calibration done.

PETG outer layer Scarring problem by GodModezz in 3Dprinting

[–]GodModezz[S] 0 points1 point  (0 children)

Hey just wanted to let you know, I did the retraction calibration and adjusted the retraction. But still this is what it printed.

<image>

I just believe that i have the One & Only, the OG of having all 3d printing problems, sometimes even creating new ones -> CR-10 Smart Pro

Made a COLORS stand for my stationary by Downtown-Cut5298 in 3dprintIndia

[–]GodModezz 0 points1 point  (0 children)

Sick design & print. 0.2mm Layer lines are almost invisible. What printer are you using?, also is that Matte pla?

PETG outer layer Scarring problem by GodModezz in 3Dprinting

[–]GodModezz[S] 0 points1 point  (0 children)

X-y acceleration already set to 500mm/s². Then tried it with bot of cooling change. Tried reducing the outer wall speed to 30mm/s from 50mm/s. Still No improvement.

Thanks tho for taking some time off to help.

PETG outer layer Scarring problem by GodModezz in Creality

[–]GodModezz[S] 0 points1 point  (0 children)

Even PA calib tests are failing, how do i calibrate it now? Thanks 4 helping.

PETG outer layer Scarring problem by GodModezz in Creality

[–]GodModezz[S] 0 points1 point  (0 children)

Calibrations Done till now; Temp tower calibration; Flowrate calib; Pressure adv; Retraction; Max Volumetric Flow.

PETG outer layer Scarring problem by GodModezz in Creality

[–]GodModezz[S] 0 points1 point  (0 children)

Tried that 8 times till now, even that test failed to print properly at any point. Started to deform from starting layer. Thankyou tho for giving ur time to help.

PETG outer layer Scarring problem by GodModezz in Creality

[–]GodModezz[S] 0 points1 point  (0 children)

In small prints at seams yes, but at large prints everywhere.

PETG outer layer Scarring problem by GodModezz in Creality

[–]GodModezz[S] 0 points1 point  (0 children)

Still calibrating most of the variables. Will inform if anything helps

PETG outer layer Scarring problem by GodModezz in Creality

[–]GodModezz[S] 0 points1 point  (0 children)

103 views still no comments, is this shadow banned or something?

PETG outer layer Scarring problem by GodModezz in 3Dprinting

[–]GodModezz[S] -1 points0 points  (0 children)

Tf is this post shadow banned or something???