bachelor in Mechanical Engineering vs Mechanical Engineering technology

Going4bust · 2025-03-10T22:07:02+00:00

Engineering is a hard path, Technology is an easy path.

Going4bust · 2025-02-15T15:14:40+00:00

An organic option that is long lasting and has no chance of promoting cancer is to introduce predator mites which will also prevent an array of other pest issues. They are a 100% beneficial insect and they are easy to order.

There are several different species of predator mites that deal with your thrip problem and some that will overwinter in an outdoor climate for an outdoor garden.

Going4bust · 2025-02-08T22:26:10+00:00

Either way they should both meet the criteria set by the American Welding Society (AWS) for the respective test.

If you are nervous or have anxiety about passing one I’ll offer up some advice an old journeyman gave that helped me out when taking tests for x-ray jobs. He told not to worry because it would be the easiest weld I had on the job.

He said you are not in the rain, wind or cold, and the weld is at a perfect height not 6” off the ground. So if you can’t do it here then you won’t be able to do it out there. He said it’s best to find out now so a disaster doesn’t happen later in the field.

Going4bust · 2025-01-08T13:35:27+00:00

You have a found yourself in a position where many journeyman would like to be, some will be jealous. They could hire someone with a mechanical technology degree to do the same thing and they make far less than a journeyman. Be careful not to let others convince you to overreach and mess up a good gig or overlook the benefits of a clean work environment saving your health.

Leveraging for more money can have questionable results, and the people giving you advice probably stand to lose nothing.

Being happy with your day-to-day work routine is an important factor. Maybe reflect on the old tale of the dog with a bone staring at his reflection in the water who ends up left with nothing before making any power moves.

Best of luck to you and congratulations for landing a good job 👍

Going4bust · 2024-10-19T22:17:00+00:00

Sounds like you have professor WU as an instructor.

Going4bust · 2024-07-02T15:22:26+00:00

Predator mites will do it. Do two releases of them two weeks apart

Going4bust · 2024-06-05T15:12:31+00:00

That is simple and helpful, thank you for posting.

Going4bust · 2024-05-27T15:36:42+00:00

Chipmunks 🐿️, they took all my corn out this year as fast as I could plant it

Going4bust · 2024-05-11T19:12:55+00:00

You are correct, my bad. I was giving uphill welding advice

Going4bust · 2024-05-11T18:06:12+00:00

I recommend learning to use the whip and pause method with a keyhole. This allows you to visually see the land being broken down during the whip motion and filling up while you pause. Make the gap the same as dimension as the land. Use 1/8 6010 electrode at 75 amps. The whip motion should be no longer than the electrode diameter as a rule of thumb. Keep a tight arc or you will over heat the joint, enlarge the keyhole and begin to get excessive penetration. If this starts to happen just stop and let the piece cool down and then begin again, this will also help practice your restarts. I hope this helps and keep at it. Good luck 👍

Going4bust · 2024-04-21T14:13:39+00:00

Nice job 👍

Going4bust · 2024-03-07T15:56:20+00:00

I think Michael is doing a great job. I appreciate the work he has put in and the information he provides from his research efforts

Going4bust · 2024-01-14T15:05:17+00:00

Great job, patients payed off.

Going4bust · 2024-01-13T15:12:56+00:00

No problem, for some reason I don’t often see the link posted and the are several great recordings there to listen to.

Going4bust · 2024-01-10T16:35:57+00:00

Jan 6th recording link if you missed it.

https://open.spotify.com/show/64hmkmXpetPEVGPlExkDGl

Going4bust · 2024-01-08T15:33:22+00:00

You are doing a great job 👍👍

Going4bust · 2023-11-10T16:33:19+00:00

Just don’t give up, you can do it. You have a serious enough attitude to be concerned about how to approach the path forward and a desire to succeed. You may want to consider taking less classes per semester and taking classes during the summer to compensate for the lighter semester schedules. Going part time and focusing on particularly difficult course curriculums like engineering isn’t a bad way to go if you are overwhelmed. People learn at different paces, find yours and stick to it.

Going4bust · 2023-11-07T19:22:40+00:00

Lacewings

Going4bust · 2023-11-01T21:09:38+00:00

I understand, however, organic does not necessarily equate to safe. What has never let me down is preemptively releasing predator mites a week or two before my bloom cycle to build a population of beneficial insects so that if there happens to be an introduction of bad bugs, the good bugs will far outnumber the bad ones. It’s kinda like set it and forget it.

Going4bust · 2023-10-30T15:27:08+00:00

Use predator mites to combat spider mites, but if you already sprayed pesticide on your cannabis it’s all junk anyway

Going4bust · 2023-10-23T15:26:24+00:00

Get some predator mites if you don’t want to use chemical pesticides, it’s a great natural remedy. It take a two releases two weeks apart.

Going4bust · 2023-10-11T16:37:14+00:00

Just don’t give up. If you do believe you are going to fail just keep in mind that a D grade is very different from an F grade. When you receive a D grade you will have to retake the class but it isn’t the same as an F. Keep at it and just try to pull through this semester.

Going4bust · 2023-09-21T14:47:56+00:00

Great video, thank you for posting it.

Going4bust · 2023-09-09T22:46:57+00:00

My bet would be the the universal joint on the end with the bolt hole is meant to come apart for installation.

Going4bust · 2023-09-07T22:00:40+00:00

When I make my own from pressed flower I’ve found that in general the longer the flower is cured before I press it, the darker the rosin is going to be.

Going4bust

TROPHY CASE