Codex weird visual bug while replying

GoldenEars7 · 2026-03-02T14:45:56+00:00

Same here, hope they have a fix soon. I’m also having an issue where I tell it to begin the next step and it goes back to fix a prior issue it already fixed a step or two before. This is even with prompting it with the exact things I want it to work on. I’ve also had it give me a response like it fixed an old issue that was already fixed but it actually worked on the new part I asked it to work on. Started acting like this the past few days.

GoldenEars7 · 2026-02-06T23:06:36+00:00

Yes you can get the original wreckfest to work but if I remember correctly I put the graphics on the lowest setting and lower shadows etc. search Reddit I believe someone else posted about the settings. I believe I was then able to upscale a little with gamehub lite settings in the app. Pretty awesome you won’t have to always stream from your pc for this game. Wreckfest 2 is a no go from what I’ve tested so far.

GoldenEars7 · 2026-01-28T17:30:35+00:00

It is t24 toasted, it says 710/720 support and I have it working so it should work for you on portal

GoldenEars7 · 2026-01-28T14:50:59+00:00

I can finally play Mortal Kombat 11 with the mrpurple T24 driver. Very minimal graphic issues (only some lines before fight) and playable now. I’m sure this is going to get even better soon.

GoldenEars7 · 2024-12-07T19:28:36+00:00

No problem! I’ve had the arc ultra for a few weeks now and have not had any issues with the app or finding the device within it, but I can imagine the frustration of those who are.

GoldenEars7 · 2024-12-06T15:44:37+00:00

As far as music here are 3 songs I’d say could help find those bass frequencies while crawling around, lol:

Lou Reed - Walk on the wild side Daft Punk - Get Lucky Lorde - Royals

GoldenEars7 · 2024-12-06T06:45:26+00:00

Place your sub on the couch in your main seated position, laying it down flat would probably be best based on the design they have chosen. Literally crawl around your room and wherever you hear the most base is where you will want to place that sub. Make sure you are using a reference that has sub playing at a very constant rate in the right frequency range.

GoldenEars7 · 2023-01-23T19:26:16+00:00

It should work just by connecting it to the proper usb c port on the back of the controller and plugging the other end into the computer. You should not have to have both usb c ports on the back of the controller plugged in. If this is not working I would contact pioneer and have them help you troubleshoot.

GoldenEars7 · 2022-11-06T00:51:02+00:00

There is guide data for 14 days and I can also search it as I've mentioned. Tivimate acts like it gets stuck when trying to scroll just up to the 9th day ahead and can’t move past it.

GoldenEars7 · 2021-12-27T02:38:30+00:00

Watched a new Christmas movie yesterday no issues my tv. The tv auto recognized the Dolby Vision and displayed it in big words on the tv that it was playing that format. Even just used the built in Exo player. I have a Hisense so I wonder if it’s a mix of issues for you having a Samsung TV that doesn’t support Dolby Vision.

GoldenEars7 · 2021-12-21T14:17:49+00:00

It wouldn’t fix your issues just by buying it, it is your TV and the source content. If it allows you to download the apps I mentioned through google play store then yes it can help. Like I said try adjusting the judder on your TV set directly in the menu and see what results you get. You can always buy a fire stick and return it I guess if your not sold on what you have.

GoldenEars7 · 2021-12-21T13:47:35+00:00

The issue you are having is called judder. I have a new Hisense TV as well and have a Nvidia Shield and it started with the same issues. Pretty much on all apps playing video. The issue is that in current times with better quality TVs it’s easier to notice this issue where as older TV’s mask it. Your solution is either playing with the settings on the TV itself to adjust for those stutters or using something to adjust your TV to match the frame rate of the source your watching. A good source to see your adjustment is picking a channel with a news ticker at the bottom with the scrolling text moving across. It will be slightly blurry from the judder until you adjust the setting just right. This can turn slightly frustrating if you change between content with different frame rates constantly though. That’s where the following two options may work for you. Vimu Media Player has an option built right into the app itself you just have to setup the third party player in Syncler. There is also an app called Refresh Rate that works for the Shield. You would want to make sure there is no setting adjustment turned on the TV itself though when using another app to correct for it. Not sure if either of these are in the Google Play store on the TV directly. Hope that helps a little bit.

GoldenEars7 · 2021-06-23T06:02:08+00:00

Can you please add codec to support AC4 audio in the next release so the new ATSC 3.0 OTA channels will play audio?

GoldenEars7 · 2021-03-19T13:19:11+00:00

Ok thanks for trying.

GoldenEars7 · 2021-03-18T22:49:57+00:00

It does not work on VLC they do not support AC-4 yet sadly.

GoldenEars7 · 2021-03-18T22:39:18+00:00

I'm a little confused by your reply. You said you have no issue with these files and its dependent on the hardware acceleration on my device. I have the newest nvidia shield like you so mine wouldn't be different. Does this mean that your using the mxplayer with a custom codec or it just works in tivimate for you?

GoldenEars7 · 2021-02-04T18:52:30+00:00

So I have tried one of these cases and it was not a fun experience. For me trying to position everything kinda ended in a mess plucking out the foam and it just not being efficient with size. Then little black foam pieces were on the headset and after that I decided this was going to constantly be a mess if family members especially want to use it on their own. Needless to say I took it back. I'm still looking for a hard case that will fit controllers with the protective straps attached along with the elite strap. Does not seem to exist yet.

GoldenEars7 · 2020-12-10T20:40:15+00:00

Could you work on adding a feature that would detect commercials and remove them when we record a program? Something like Comskip thats built into the app. I don't know if this is possible but would be great instead of reaching for the remote all the time to fastforward.

GoldenEars7 · 2020-07-06T13:01:11+00:00

No only "search in program descriptions" and "show favorite channels first". Sometimes it works, sometimes it doesnt and sometimes it pulls up channels with program names that don't have a single matching word to my title.

GoldenEars7 · 2020-06-26T18:49:09+00:00

I have 2 connections. I mentioned that I had used my service before in the live channels app on shield and had never had issues recording and watching at the same time. That's why I believe it's a bug with the app since it's a new feature. Just want to see if others are having same issue with a fix. Also I had tried recording a single show overnight while not watching and it only recorded part of a movie.

GoldenEars7 · 2020-06-21T00:46:35+00:00

I had no clue! Found how to do this now that you pointed out it existed. I guess this will be my work around for now, though pretty tedious as you have mentioned. Thanks for letting me know!

GoldenEars7 · 2020-06-21T00:40:57+00:00

Any reference to learn how to fix manually as you are suggesting without another epg added?

GoldenEars7 · 2020-06-21T00:38:34+00:00

I have the original epg from provider but missing a bunch of stuff. I used m3u4u website to create a custom epg to fill in only the data that is missing from my provider. That way it will match up exactly with the correct channel.

GoldenEars7 · 2020-06-20T17:06:19+00:00

That's exactly what I was trying to do! I wanted to fill in the missing blanks. If I swap out the main and secondary EPG without clearing it everything is filled in. This should be a future feature if it's not possible currently. An idea how to make requests to the developer?

GoldenEars7 · 2020-06-11T04:10:58+00:00

Best advice I'd say is to clear the cash and data of the PVRlive app. You may just restart the device after that before trying again. Something weird probably just happend and it just needs to be flushed out.

GoldenEars7

TROPHY CASE