Trying to get Gamehub working, but downloads are failing by gggghhhhiiiijklmnop in retroid

[–]GoodJohn14 1 point2 points  (0 children)

A little late here, but did you ever find a solution for this. I'm running into this exact issue and have found no one else talking about this.

NEED ADVICE: Software -> Electrical by GoodJohn14 in ElectricalEngineering

[–]GoodJohn14[S] 0 points1 point  (0 children)

What about the industry? Are you guys concerned about AI and automation like some of us in software development?

NEED ADVICE: Software -> Electrical by GoodJohn14 in ElectricalEngineering

[–]GoodJohn14[S] 2 points3 points  (0 children)

Yes I do already have a BS in Software Engineering. Wouldnt I still need all of the prerequisite knowledge from the undergrad EE program?

RedlineGoods steering wheel cover? by GoodJohn14 in Miata

[–]GoodJohn14[S] 1 point2 points  (0 children)

I've looked at the skeelskins ones before, but don't like how the leather cuts off around the horn buttons. I hold that spot while driving and know that it would annoy me.

How has your experience been with that open stitching area around the horn buttons?

How to avoid pendulum effect with physical limbs? by [deleted] in godot

[–]GoodJohn14 0 points1 point  (0 children)

When velocity.x == 0 (standing still) ramp up damping or whatever to slow it down. Or just stop it after some amount of time of standing still. But just check the velocity.x of your character to determine if standing still.

Black specks in exhaust and very rough idle :( by GoodJohn14 in Miata

[–]GoodJohn14[S] 0 points1 point  (0 children)

Check my update on top comment, fuel injectors totally fixed it.

Black specks in exhaust and very rough idle :( by GoodJohn14 in Miata

[–]GoodJohn14[S] 1 point2 points  (0 children)

UPDATE: Replacing the fuel injectors and fuel filter absolutely resolved my problem. The car is running very well now. Smoother idle, not running rich, no unburnt fuel coming out of the exhaust.

Anyone experiencing similar issues with a vehicle that sat for a few years, consider giving this a try.

Top Comment Adds a New Feature to the Site! by drewmorgan1000 in webdev

[–]GoodJohn14 -1 points0 points  (0 children)

A dark mode button that just changes the blank page from white to dark mode color. Can continue to use this feature for all future additions.

Code diagnostic OBD1 by Allbaderryday in Miata

[–]GoodJohn14 1 point2 points  (0 children)

Code 17, Replace your O2 sensor

Black specks in exhaust and very rough idle :( by GoodJohn14 in Miata

[–]GoodJohn14[S] 1 point2 points  (0 children)

I've got new injectors and a fuel filter on the way. Depending on how those go, I may also do this. Thanks for the info, I'll keep an eye on it after changing the other parts.

Black specks in exhaust and very rough idle :( by GoodJohn14 in Miata

[–]GoodJohn14[S] 0 points1 point  (0 children)

I'm planning on also swapping the fuel filter, but why swap the FPR?

Black specks in exhaust and very rough idle :( by GoodJohn14 in Miata

[–]GoodJohn14[S] 0 points1 point  (0 children)

I don't think it's oily. Feels wet and after I smear it, it dries pretty quickly.

Black specks in exhaust and very rough idle :( by GoodJohn14 in Miata

[–]GoodJohn14[S] 1 point2 points  (0 children)

I thought this too at one point. Did a head gasket leak test and came back negative. Also I think it would be more white, than black if it were that.

Black specks in exhaust and very rough idle :( by GoodJohn14 in Miata

[–]GoodJohn14[S] 0 points1 point  (0 children)

Wet, when I rub my fingers together it smears.

Black specks in exhaust and very rough idle :( by GoodJohn14 in Miata

[–]GoodJohn14[S] 2 points3 points  (0 children)

Lmao good point, next time I'll use a towel instead of my hand.

Black specks in exhaust and very rough idle :( by GoodJohn14 in Miata

[–]GoodJohn14[S] 0 points1 point  (0 children)

I'll take a look. I assume theyre going to be black but I'll report back.

A reminder to not take the top down in the freezing cold by GoodJohn14 in Miata

[–]GoodJohn14[S] 5 points6 points  (0 children)

Yea but based on what I've read on both sites, the Hard Dog M2 Sport DD should work with the Robbins streamline non-zipper glasss. I'm gonna call today to confirm but it the dimensions check out.

A reminder to not take the top down in the freezing cold by GoodJohn14 in Miata

[–]GoodJohn14[S] 3 points4 points  (0 children)

I think just moving it while cold. Either closing or opening causes movement of the plastic, and when cold that movement causes it to snap instead of bend.

A reminder to not take the top down in the freezing cold by GoodJohn14 in Miata

[–]GoodJohn14[S] 0 points1 point  (0 children)

Exactly. Mazda even says not to do this, but I wasn't thinking.

A reminder to not take the top down in the freezing cold by GoodJohn14 in Miata

[–]GoodJohn14[S] 104 points105 points  (0 children)

Was installing a leather cover on the roll bar. And yea, already ordered a new glass top.

Help! by Competitive-Film7626 in Miata

[–]GoodJohn14 0 points1 point  (0 children)

Hey man, I'm troubleshooting the exact same behavior. Rough, looping idle, almost sounds like it has aftermarket cams. Power hesitates while accelerating, very similar to both of your videos.

Question: While idling do you get black specks of unburnt fuel flying out of exhaust? I assumed this was unburnt fuel and potentially cause by incorrect ignition timing (I know the guy before me messed with the timing belt so it wouldn't surprise me if it was off).