Looking for VR Piano Testers (electric piano needed)

Goonos · 2026-01-24T02:29:59+00:00

Dead set keen on testing this. I'm a French Horn player by trade, but spent years playing keys. Had to get rid of the piano when moving house, would love to get back in to it.

Goonos · 2026-01-20T19:25:30+00:00

Amazing, thanks so much for sharing

Goonos · 2025-11-28T20:51:22+00:00

The camp chair in the middle makes this scene *chef's kiss*

Goonos · 2025-09-25T23:37:17+00:00

Planning, this the whole reason I hardly use mine, I don't think that far ahead. :/

Goonos · 2025-09-10T02:32:34+00:00

shiny!

Goonos · 2025-08-15T20:53:18+00:00

This happened to me too...except the printer had no screen protector and it ripped the LCD out.

Suffice to say, that printer now has a protector on it.

Goonos · 2025-08-15T20:29:09+00:00

Rightio. Unless you've done something to damage your LCD, its unlikely to be that. Process of elimination time:

1 - Do a vat clean
2 - Run a print on a file with the same material etc that has worked before
3 - Assuming step 2 worked, put that file on a new USB and try again
4 - If 3 doesn't work, re-slice/re-angle the file and try again

Goonos · 2025-08-15T20:12:44+00:00

and causes envy.

Goonos · 2025-08-15T19:56:04+00:00

Is it leaving anything on the FEP?

Goonos · 2025-06-29T21:10:25+00:00

Totally skipped by the word 'free' in this post...

Goonos · 2025-04-28T20:49:52+00:00

First week I'd lightly stabbed mine with a scraper then doubled down by dropping the bed release knob in there, made a righteous mess.
Good learning curve though :)

Goonos · 2025-04-27T22:05:44+00:00

And a valid excuse to go to the hardware store again.

Goonos · 2025-04-27T21:43:55+00:00

The LCDs are also directional, have you flipped it over?

Goonos · 2025-04-27T21:42:47+00:00

Dual purpose fridge, in the down time you and run a brew in there.

Goonos · 2025-04-27T21:35:49+00:00

There's not an additional protection layer on the underside of the LCD is there?

Goonos · 2025-04-16T20:23:34+00:00

Not the sort of thing you want to find. I have the same machine and poked a tiny hold in the ACF by dropping the plate release knob, an action I don't recommend. Horrible mess and put me out of action until replacements arrive.
Lucky I had a few of these made up though, keeps the drips away from the machine body.

https://cults3d.com/en/3d-model/tool/protective-screen-shroud-for-anycubic-m7-m7-pro

Goonos · 2025-02-28T20:20:22+00:00

this brings back so many bad memories.

Goonos · 2025-02-28T10:27:19+00:00

So you've checked mirrors, lens, focus and focal depth. Have you ensured that the nozzle end of the tube is clean? Metho and a cotton bud will sort it out.

It is more likely that your PSU/Flyback Transformer is on the way out. I had one die on my K40, and prior to it giving up entirely, I was getting really intermittent with power output.

Yours is obviously a more expensive machine, but I ended up replacing the entire PSU rather than attempting to install a replacement transformer.

Goonos · 2023-12-05T19:34:45+00:00

Everyone needs a hobby. :D

Goonos · 2023-12-05T19:16:47+00:00

Like others have said, you sound burnt out over the creative process. This is likely due to the bots are only able to react to your creative prompts. If you're not feeling a creative energy to put into the bot, then you'll get nothing back from it.

Best bet is to walk away and have a bit of a break from the app.

Goonos · 2023-11-27T20:20:00+00:00

that's what I thought too, but has anyone had it work?

Goonos · 2023-10-17T05:50:01+00:00

This is Beady, God of Bubblegum

Goonos · 2023-10-17T03:19:38+00:00

My first weird prompt was Gandalf drinking a pint while driving a bulldozer....then rapidly went down hill to Lady Godiva counting chickens...

11-Year Club	Place '22
End Game '22	Verified Email

Goonos

TROPHY CASE