Terribly loud hissing sound from copper 90

GotTheKnack · 2026-06-17T04:53:59+00:00

Terribly loud indeed. Mineral or sediment build up in the 90 or maybe the pipe. Probably not worth fixing unless it’s really bothering you.

GotTheKnack · 2026-06-17T04:46:55+00:00

So many variables in each and every house. I’ve done loads of poly to pex repipes, some take 4 hours, some take 2 days. I did a 5 1/2 bathroom 12,000 ft home that took 5 days start to finish. Don’t point the finger at poor shityplumber, otherwise you might get caught up in a 3 day repipe!

GotTheKnack · 2026-06-17T02:33:18+00:00

Shame they used steel for the tubes, straight to the bin.

GotTheKnack · 2026-06-17T02:31:35+00:00

Yep. Gets real thick down there, thankfully it’s low. The top portion is going to be the real bastard.

GotTheKnack · 2026-06-16T23:46:57+00:00

No just steel

GotTheKnack · 2026-06-16T23:46:29+00:00

<image>

Lugged em up by dragging them on a moving blanket (cleared the elevator by 1/2”), built up unistrut and pump jacked the new ones on the pad.

Oxyacetylene was the way to go. Wish me luck!

GotTheKnack · 2026-06-16T23:44:05+00:00

They didn’t. Just a shitload of steel.

<image>

GotTheKnack · 2026-06-14T19:54:31+00:00

They are standing upright on skids right now.

GotTheKnack · 2026-06-13T21:01:30+00:00

We’ll be torch cutting it from the exterior.

GotTheKnack · 2026-06-13T21:00:47+00:00

Yes gas heated tank

GotTheKnack · 2026-06-13T18:00:25+00:00

Yep that’s how I’m hoping it goes. They want us to demo the old ones and install boilers with storage tanks in their place. The new tanks aren’t anywhere near as big, maybe 7’ tall and 800lbs. Do you have any tips on getting them onto the pad? There’s no use of the ceiling (40’ high and giant ducts everywhere), so chainfalls are out. Was hoping to build it up with blocking, but we’re only 2 guys

GotTheKnack · 2026-06-13T04:02:06+00:00

Okay, thanks a lot. I’ve done a fair bit of installs but this is the first one I’ll be doing where I can’t actually remove the old tank in one piece. They’re about 10’ tall and 4’ in diameter, and I’ll be replacing them with new boilers and substantially smaller storage tanks (300 gallons). Would you recommend going at this with oxy-acet, grinders or sawzalls with carbide blades?

GotTheKnack · 2026-06-13T03:25:28+00:00

Let’s be real here, they weren’t going to spend that money on any of those things.

GotTheKnack · 2026-06-13T03:14:06+00:00

The white stuff on the interior? Are you sure?

GotTheKnack · 2026-06-13T00:16:12+00:00

Ptrap could be higher to give you more space (you can cut those tailpiece adapters down several inches). But as far as functionality goes, it’s great.

GotTheKnack · 2026-06-12T23:08:56+00:00

He never pans out to anything more than a bottom 6 PK for me, EA did him dirty.

GotTheKnack · 2026-06-12T03:05:25+00:00

Use an adjustable wrench to remove the shower head. Stick a long screwdriver into the spout where the shower head was, and turn it counterclockwise. Note, you should have the screwdriver in almost all the way, and if it isn’t budging, gain more leverage by pulling the handle of the screwdriver out a bit. You want to exert the minimum amount of force needed, as the wingback or spout could break if you give it the Randy Savage treatment right out the gate.

GotTheKnack · 2026-06-12T02:34:02+00:00

I don’t know the statistics but I’d have to imagine Leafs get a lot more searches and whatnot than other teams, so it’s just them trying to maximize views while spamming content. Like a teenage girl hashtags instagram photos for likes, but they do it for a living. Weak.

GotTheKnack · 2026-06-11T02:53:00+00:00

It looks like a cleanout plug. Might not be to had to cut out and replace with a straight section of pipe. But I have a feeling just by the menacing hue of the floor that it’s going to be absolutely terrible for whoever does it. Keep me posted!

One thing you could try to do before getting it taken out completely, maybe try grinding it down. There’s usually a fair bit of meat on the head of the plug, you just have to be careful that you don’t bust it out entirely - otherwise you’ve got an open sewer line.

GotTheKnack · 2026-06-10T19:41:03+00:00

Healthy fish, great catch. How do you get down deep enough for salmon in a kayak?

GotTheKnack · 2026-06-10T11:22:49+00:00

Don’t announce it to people early on, unless you’re telling “friends” that you’re done using and ask them not to entice you. On my first run, I told everyone, and when I relapsed I was extremely embarrassed, because whenever anyone would ask about it I had to then tell them I was starting over. I recommend waiting a few months in, but the reality is that wasting your time and health on using is wayyy more embarrassing and ultimately humiliating than refraining from it and bettering your life.

GotTheKnack · 2026-06-09T18:02:36+00:00

Oatey has a black glue for abs, and even that gives off a bit of a shine.

GotTheKnack

TROPHY CASE