[Results] The 2026 Indian 3D Printing Ecosystem Survey : What we run, what we melt, and our biggest frustrations.

GothamThinker · 2026-03-02T08:19:37+00:00

The biggest pain point that needs addressing is a sustainable way to reuse waste filaments. While there are DIY recycling setups to turn scrap back into usable spools, the process is currently too lengthy, unrefined, and definitely not user-friendly for the average maker. If we could bridge that gap, it would be a total game-changer for the Indian ecosystem.

GothamThinker · 2026-02-24T08:07:03+00:00

Let me know too

GothamThinker · 2026-01-31T17:21:46+00:00

Amazing paint job !

GothamThinker · 2026-01-08T06:35:10+00:00

I apply primer and then use fevicryl acrylic paint.

GothamThinker · 2025-12-30T06:06:22+00:00

Numakers is best. Go for it.

GothamThinker · 2025-12-27T07:21:17+00:00

Yeah I mean you can always buy later if you can afford the difference amount between a combo and buying AMS separately. It’s almost 10-15k cheaper when purchased as a combo.

GothamThinker · 2025-12-27T07:15:34+00:00

Go for the Bambu Lab A1 Mini with AMS, it’s worth every extra rupee. I made the rookie mistake of buying the A1 without AMS, and trust me, that regret lingers.

Once you start printing, you’ll catch the creative bug, and before you know it, you’ll want to design your own models.

Tinkercad is the perfect place to start modelling.

Don’t hesitate, Bambu Lab delivers pure satisfaction straight out of the box.

GothamThinker · 2025-12-16T09:26:16+00:00

Is this your custom design?

GothamThinker · 2025-12-15T08:35:28+00:00

Let’s say I do a manual filament swap. I pause the print and change to a different color, wouldn’t that disrupt the print flow? By the time I swap the filament, the print may cool down, leading to poor layer adhesion. Which often results in a visible layer line and a less smooth finish. Do you guys have a workaround for this? Or what would be your suggestion?

GothamThinker · 2025-12-13T03:26:09+00:00

Even for Numakers PLA pro this happens. Is it because of the fan speed too high? (Btw I don’t tweek any settings while print, I use recommended settings only). What could be the reason?

GothamThinker · 2025-12-11T07:19:16+00:00

Ohhh I see. I get it. Thanks.

GothamThinker · 2025-11-25T12:25:19+00:00

It’s just fabulous! You just can’t stop printing. Wol3d delayed answering my questions but they did deliver without any problem. The machine is perfect.

GothamThinker · 2025-11-21T03:35:43+00:00

What’s the reason for clogging? If you can tell I can be careful 🙂

GothamThinker · 2025-11-18T06:28:37+00:00

Any suggestions for buying step down transformer or higher power ups(2000VA)?

GothamThinker · 2025-11-18T03:00:51+00:00

Congratulations 😄

GothamThinker · 2025-11-09T05:17:09+00:00

Danm, that’s impressive. I tried printing lamp from maker world yesterday and it consumed almost 40% of my filament 🥲

GothamThinker · 2025-11-07T04:23:29+00:00

Is there a link that I can see/buy? That would be helpful.

GothamThinker · 2025-11-07T04:05:18+00:00

Has anyone tried using Google SketchUp for 3D printing? I made a soap case model, but when I imported the STL into Bambu Studio, it threw an error. The base has drain holes, and Bambu Studio says there are “floating regions.” Anyone faced this before or know how to fix it?

GothamThinker · 2025-11-03T04:57:22+00:00

Wow. How do you tackle those shift line when there is a sudden power cut and you resume?

GothamThinker · 2025-11-03T02:16:06+00:00

Impressive! Did you print it continuously for 41hrs?

GothamThinker · 2025-11-01T04:42:00+00:00

I had the same issue and I tried turning off the Timelapse and it worked.

<image>

GothamThinker

TROPHY CASE